Updated Dec 23, 2021 Test Engine to Practice Test for MS-500 Valid and Updated Dumps
Exam Questions for MS-500 Updated Versions With Test Engine
NEW QUESTION 81
Your network contains an on-premises Active Directory domain. The domain contains the servers shown in the following table.
You plan to implement Azure Advanced Threat Protection (ATP) for the domain.
You install an Azure ATP standalone sensor on Server1.
You need to monitor the domain by using Azure ATP.
What should you do?
- A. Configure port mirroring for DC1.
- B. Install the Microsoft Monitoring Agent on DC1.
- C. Install the Microsoft Monitoring Agent on Server!.
- D. Configure port mirroring for Server 1.
Answer: A
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure-advanced-threat-protection/configure-port-mirroring
NEW QUESTION 82
You have a Microsoft 365 subscription. From the Security & Compliance admin center, you create the retention policies shown in the following table.
Policy1 if configured as showing in the following exhibit.
Policy2 is configured as shown in the following exhibit.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/retention-policies?redirectSourcePath=%252fen-us%252farticle%252fOverview-of-retention-policies-5e377752-700d-4870-9b6d-12bfc12d2423#the-principles-of-retention-or-what-takes-precedence
NEW QUESTION 83
You have a Microsoft 365 subscription that contains the users shown in the following table.
You create and enforce an Azure Active Directory (Azure AD) Identity Protection sign-in risk policy that has the following settings:
* Assignments: Include Group1, Exclude Group2
* Conditions: User risk level of Medium and above
* Access: Allow access, Require password change
The users attempt to sign in. The risk level for each user is shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Box 1: Yes.
User1 is in Group1 which the policy applies to.
Box 2: No
User2 is in Group2 which is excluded from the policy.
Box 3: No
User3 is in Group1 which is included in the policy and Group2 which is excluded from the policy. In this case, the exclusion wins so the policy does not apply to User3.
NEW QUESTION 84
How should you configure Group3? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION 85
You have a Microsoft 365 subscription that uses an Azure Active Directory (Azure AD) tenant named contoso.com. OneDrive stores files that are shared with external users. The files are configured as shown in the following table.
You create a data loss prevention (DLP) policy that applies to the content stored in OneDrive accounts. The policy contains the following three rules:
* Rulel:
* Conditions: Label 1, Detect content that's shared with people outside my organization
* Actions: Restrict access to the content for external users
* User notifications: Notify the user who last modified the content
* User overrides: On
* Priority: 0
* Rule2:
* Conditions: Label 1 or Label2
* Actions: Restrict access to the content
* Priority: 1
* Rule3:
* Conditions: Label2, Detect content that's shared with people outside my organization
* Actions: Restrict access to the content for external users
* User notifications: Notify the user who last modified the content
* User overrides: On
* Priority: 2
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 86
Your network contains an on-premises Active Directory domain named contoso.com. The domain contains the groups shown in the following table.
The domain is synced to a Microsoft Azure Active Directory (Azure AD) tenant that contains the groups shown in the following table.
You create an Azure Information Protection policy named Policy1.
You need to apply Policy1.
To which groups can you apply Policy1? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/en-us/azure/information-protection/prepare
NEW QUESTION 87
You have a Microsoft 365 subscription. Auditing is enabled.
A user named User1 is a member of a dynamic security group named Group1.
You discover that User1 is no longer a member of Group1.
You need to search the audit log to identify why User1 was removed from Group1.
Which two actions should you use in the search? To answer, select the appropriate activities in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
References:
https://docs.microsoft.com/en-us/office365/securitycompliance/search-the-audit-log-in-security-and-compliance
NEW QUESTION 88
You have a Microsoft 365 subscription linked to an Azure Active Directory (Azure AD) tenant that contains a user named User1.
You have a Data Subject Request (DSR) case named Case1.
You need to allow User1 to export the results of Case1. The solution must use the principle of least privilege.
Which role should you assign to User1 for Case1?
- A. Global Reader
- B. eDiscovery Administrator
- C. Security Operator
- D. eDiscovery Manager
Answer: D
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/manage-gdpr-data-subject-requests-with-the-dsr- case-tool?view=o365-worldwide#step-1-assign-ediscovery-permissions-to-potential-case-members Implement and manage threat protection Testlet 1 Overview Fabrikam, Inc. is manufacturing company that sells products through partner retail stores. Fabrikam has 5,000 employees located in offices throughout Europe.
Existing Environment
Network Infrastructure
The network contains an Active Directory forest named fabrikam.com. Fabrikam has a hybrid Microsoft Azure Active Directory (Azure AD) environment.
The company maintains some on-premises servers for specific applications, but most end-user applications are provided by a Microsoft 365 E5 subscription.
Problem Statements
Fabrikam identifies the following issues:
* Since last Friday, the IT team has been receiving automated email messages that contain "Unhealthy Identity Synchronization Notification" in the subject line.
* Several users recently opened email attachments that contained malware. The process to remove the malware was time consuming.
Requirements
Planned Changes
Fabrikam plans to implement the following changes:
* Fabrikam plans to monitor and investigate suspicious sign-ins to Active Directory
* Fabrikam plans to provide partners with access to some of the data stored in Microsoft 365 Application Administration Fabrikam identifies the following application requirements for managing workload applications:
* User administrators will work from different countries
* User administrators will use the Azure Active Directory admin center
* Two new administrators named Admin1 and Admin2 will be responsible for managing Microsoft Exchange Online only Security Requirements Fabrikam identifies the following security requirements:
* Access to the Azure Active Directory admin center by the user administrators must be reviewed every seven days. If an administrator fails to respond to an access request within three days, access must be removed
* Users who manage Microsoft 365 workloads must only be allowed to perform administrative tasks for up to three hours at a time. Global administrators must be exempt from this requirement
* Users must be prevented from inviting external users to view company data. Only global administrators and a user named User1 must be able to send invitations
* Azure Advanced Threat Protection (ATP) must capture security group modifications for sensitive groups, such as Domain Admins in Active Directory
* Workload administrators must use multi-factor authentication (MFA) when signing in from an anonymous or an unfamiliar location
* The location of the user administrators must be audited when the administrators authenticate to Azure AD
* Email messages that include attachments containing malware must be delivered without the attachment
* The principle of least privilege must be used whenever possible
Implement and manage threat protection
Testlet 2
This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Litware, Inc. is a financial company that has 1,000 users in its main office in Chicago and 100 users in a branch office in San Francisco.
Existing Environment
Internal Network Infrastructure
The network contains a single domain forest. The forest functional level is Windows Server 2016.
Users are subject to sign-in hour restrictions as defined in Active Directory.
The network has the IP address ranges shown in the following table.
The offices connect by using Multiprotocol Label Switching (MPLS).
The following operating systems are used on the network:
* Windows Server 2016
* Windows 10 Enterprise
* Windows 8.1 Enterprise
The internal network contains the systems shown in the following table.
Litware uses a third-party email system.
Cloud Infrastructure
Litware recently purchased Microsoft 365 subscription licenses for all users.
Microsoft Azure Active Directory (Azure AD) Connect is installed and uses the default authentication settings.
User accounts are not yet synced to Azure AD.
You have the Microsoft 365 users and groups shown in the following table.
Requirements
Planned Changes
Litware plans to implement the following changes:
* Migrate the email system to Microsoft Exchange Online
* Implement Azure AD Privileged Identity Management
Security Requirements
Litware identifies the following security requirements:
* Create a group named Group2 that will include all the Azure AD user accounts. Group2 will be used to provide limited access to Windows Analytics
* Create a group named Group3 that will be used to apply Azure Information Protection policies to pilot users.
Group3 must only contain user accounts
* Use Azure Advanced Threat Protection (ATP) to detect any security threats that target the forest
* Prevent users locked out of Active Directory from signing in to Azure AD and Active Directory
* Implement a permanent eligible assignment of the Compliance administrator role for User1
* Configure domain-joined servers to ensure that they report sensor data to Microsoft Defender ATP
* Prevent access to Azure resources for the guest user accounts by default
* Ensure that all domain-joined computers are registered to Azure AD
Multi-factor authentication (MFA) Requirements
Security features of Microsoft Office 365 and Azure will be tested by using pilot Azure user accounts.
You identify the following requirements for testing MFA:
* Pilot users must use MFA unless they are signing in from the internal network of the Chicago office. MFA must NOT be used on the Chicago office internal network.
* If an authentication attempt is suspicious, MFA must be used, regardless of the user location.
* Any disruption of legitimate authentication attempts must be minimized.
General Requirements
Litware wants to minimize the deployment of additional servers and services in the Active Directory forest.
NEW QUESTION 89
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: &=Q8v@2qGzYz
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11032396
You need to ensure that a user named Lee Gu can manage all the settings for Exchange Online. The solution must use the principle of least privilege.
To complete this task, sign in to the Microsoft Office 365 admin center.
Answer:
Explanation:
See explanation below.
* In the Exchange Administration Center (EAC), navigate to Permissions > Admin Roles.
* Select the group: Organization Management and then click on Edit.
* In the Members section, click on Add.
* Select the users, USGs, or other role groups you want to add to the role group, click on Add, and then click on OK.
* Click on Save to save the changes to the role group.
Reference:
https://help.bittitan.com/hc/en-us/articles/115008104507-How-do-I-assign-the-elevated-admin-role-Organization
https://docs.microsoft.com/en-us/exchange/permissions-exo/permissions-exo
NEW QUESTION 90
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: &=Q8v@2qGzYz
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11032396
You need to ensure that a user named Lee Gu can manage all the settings for Exchange Online. The solution must use the principle of least privilege.
To complete this task, sign in to the Microsoft Office 365 admin center.
Answer:
Explanation:
See explanation below.
* In the Exchange Administration Center (EAC), navigate to Permissions > Admin Roles.
* Select the group: Organization Management and then click on Edit.
* In the Members section, click on Add.
* Select the users, USGs, or other role groups you want to add to the role group, click on Add, and then click on OK.
* Click on Save to save the changes to the role group.
Reference:
https://help.bittitan.com/hc/en-us/articles/115008104507-How-do-I-assign-the-elevated-admin-role-Organization
https://docs.microsoft.com/en-us/exchange/permissions-exo/permissions-exo
NEW QUESTION 91
You have a Microsoft 365 subscription that uses a default domain name of contoso.com.
The multi-factor authentication (MFA) service settings are configured as shown in the exhibit. (Clock the Exhibit tab.)
In contoso.com, you create the users shown in the following table.
What is the effect of the configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 92
You have a Microsoft 365 subscription that uses a default domain name of contoso.com.
The multi-factor authentication (MFA) service settings are configured as shown in the exhibit. (Clock the Exhibit tab.)
In contoso.com, you create the users shown in the following table.
What is the effect of the configuration? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 93
You have a Microsoft 365 subscription.
You have a site collection named SiteCollection1 that contains a site named Site2. Site2 contains a document library named Customers.
Customers contains a document named Litware.docx. You need to remove Litware.docx permanently.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation
NEW QUESTION 94
You have a Microsoft 365 subscription that includes a user named Admin1.
You need to ensure that Admin1 can preserve all the mailbox content of users, including their deleted items.
The solution must use the principle of least privilege.
What should you do?
- A. From the Microsoft 365 admin center, assign the Exchange administrator role to Admin1.
- B. From the Exchange admin center, assign the Recipient Management admin role to Admin1.
- C. From the Exchange admin center, assign the Discovery Management admin role to Admin1.
- D. From the Azure Active Directory admin center, assign the Service administrator role to Admin1.
Answer: C
NEW QUESTION 95
You have a Microsoft 365 subscription.
You have a Microsoft SharePoint Online site named Site1. The files in Site1 are protected by using Microsoft Azure Information Protection.
From the Security & Compliance admin center, you create a label that designates personal data.
You need to auto-apply the new label to all the content in Site1.
What should you do first?
- A. From PowerShell, run Set-ComplianceTag.
- B. From the Security & Compliance admin center, create a Data Subject Request (DSR).
- C. From PowerShell, run Set-ManagedContentSettings.
- D. Remove Azure Information Protection from the Site1 files.
Answer: D
Explanation:
Explanation/Reference:
https://docs.microsoft.com/en-us/office365/securitycompliance/apply-labels-to-personal-data-in-office-365
NEW QUESTION 96
You have an Azure Active Directory (Azure AD) tenant named contoso.com that contains the users shown in the following table.
You register devices in contoso.com as shown in the following table.
You create app protection policies in Intune as shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
References:
https://docs.microsoft.com/en-us/intune/apps/app-protection-policy
NEW QUESTION 97
You have a Microsoft 365 subscription that contains the users shown in the following table.
You create and enforce an Azure Active Directory (Azure AD) Identity Protection sign-in risk policy that has the following settings:
* Assignments: Include Group1, Exclude Group2
* Conditions: User risk level of Medium and above
* Access: Allow access, Require password change
The users attempt to sign in. The risk level for each user is shown in the following table.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Box 1: Yes.
User1 is in Group1 which the policy applies to.
Box 2: No
User2 is in Group2 which is excluded from the policy.
Box 3: No
User3 is in Group1 which is included in the policy and Group2 which is excluded from the policy. In this case, the exclusion wins so the policy does not apply to User3.
NEW QUESTION 98
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.
Username and password
Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username:
admin@[email protected]
Microsoft 365 Password: &=Q8v@2qGzYz
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support only:
Lab instance: 11032396
You need to ensure that [email protected] receives an alert when a user establishes a sync relationship to a document library from a computer that is a member of an Active Directory (AD) domain.
To complete this task, sign in to the Microsoft Office 365 admin center.
Answer:
Explanation:
See explanation below.
Explanation
1. Navigate to Manage Alerts in the Security & Compliance Center.
2. On the Activity alerts page, click
The flyout page to create an activity alert is displayed.
3. Complete the following fields to create an activity alert:
a. Name - Type a name for the alert. Alert names must be unique within your organization.
b. Description (Optional) - Describe the alert, such as the activities and users being tracked, and the users that email notifications are sent to. Descriptions provide a quick and easy way to describe the purpose of the alert to other admins.
c. Alert type - Make sure the Custom option is selected.
d. Send this alert when - Click Send this alert when and then configure these two fields:
* Activities - Click the drop-down list to display the activities that you can create an alert for. This is the same activities list that's displayed when you search the Office 365 audit log. You can select one or more specific activities or you can click the activity group name to select all activities in the group. For
* a description of these activities, see the "Audited activities" section in Search the audit log. When a user performs any of the activities that you've added to the alert, an email notification is sent.
* Users - Click this box and then select one or more users. If the users in this box perform the activities that you added to the Activities box, an alert will be sent. Leave the Users box blank to send an alert when any user in your organization performs the activities specified by the alert.
e. Send this alert to - Click Send this alert, and then click in the Recipients box and type a name to add a user's who will receive an email notification when a user (specified in the Users box) performs an activity (specified in the Activities box). Note that you are added to the list of recipients by default. You can remove your name from this list.
4. Click Save to create the alert.
The new alert is displayed in the list on the
The status of the alert is set to On. Note that the recipients who will receive an email notification when an alert is sent are also listed.
Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/create-activity-alerts?view=o365-worldwide
NEW QUESTION 99
You have a Microsoft 365 subscription that contains an Azure Active Directory (Azure AD) tenant named contoso.com.
You need to recommend an Azure AD Privileged Identity Management (PIM) solution that meets the following requirements:
* Administrators must be notified when the Security administrator role is activated.
* Users assigned the Security administrator role must be removed from the role automatically if they do not sign in for 30 days.
Which Azure AD PIM setting should you recommend configuring for each requirement? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Reference:
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-how-to-config
https://docs.microsoft.com/bs-latn-ba/azure/active-directory/privileged-identity-management/pim-how-to-change
NEW QUESTION 100
You have a Microsoft Azure Active Directory (Azure AD) tenant named contoso.com.
Four Windows 10 devices are joined to the tenant as shown in the following table.
On which devices can you use BitLocker To Go and on which devices can you turn on auto-unlock? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
NEW QUESTION 101
You have a Microsoft 365 E5 subscription that contains the users shown in the following table.
You plan to implement Azure Active Directory (Azure AD) Identity Protection.
You need to identify which users can perform the following actions:
* Configure a user risk policy.
* View the risky users report.
Which users should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/active-directory/identity-protection/overview-identity-protection
NEW QUESTION 102
......
MS-500 Exam Dumps - Free Demo & 365 Day Updates: https://www.examcollectionpass.com/Microsoft/MS-500-practice-exam-dumps.html
Pass MS-500 Exam with Updated MS-500 Exam Dumps PDF: https://drive.google.com/open?id=1wOg_-uThBi5X4CL3mGPpjD4Fx2hbmaik