[Nov 23, 2021] Fully Updated JNCDS-SP (JN0-1362) Certification Sample Questions
Latest Juniper JN0-1362 Real Exam Dumps PDF
NEW QUESTION 62
A customer reports a network outage at a branch office after users have reported intermittent Internet connectivity Upon further investigation, you determine that there is significant packet loss and that the majority of traffic on the WAN consists of DNS responses from many different sources.
In this scenario, which design consideration would reduce further occurrences with minimal chance of affecting valid traffic?
- A. Configure BGP flowspec.
- B. Create a firewall filter to drop all traffic to the affected destination address of the attack
- C. Create a firewall filter to drop all traffic based on the source addresses of the attack.
- D. Implement CGNAT
Answer: D
NEW QUESTION 63
What are two considerations for all WAN designs that use best industry practices? (Choose two)
- A. to provide scalability
- B. to provide a dynamic routing protocol internally in the LAN
- C. to provide ease of deployment
- D. to provide VXLAN and EVPN solutions
Answer: A,C
NEW QUESTION 64
You belong to an organization consisting of multiple sites. Your topology is constantly changing. You need a method of encrypting traffic between sites.
Which technology enables you to add new sites without reconfiguring existing sites?
- A. point-to-point IPsec VPN
- B. hub-and-spoke IPsec VPN
- C. IPsec Auto VPN with ADVPN
- D. mesh IPsec overlay VPN
Answer: A
NEW QUESTION 65
You are creating a design proposal for a new service provider network using MX Series devices. You must design an OoB management network that is isolated from the production network.
In this scenario which two statements are correct? (Choose two)
- A. The management network should connect to a separate network infrastructure.
- B. The FXPO interface can be used to connect devices to the management network.
- C. You must use the console port to access the devices on the management network.
- D. The management network should connect to the production network infrastructure.
Answer: A,B
NEW QUESTION 66
You work for a service provider that offers Layer 2 services. One of the customers is purchasing Layer 2 VPN services to interconnect several sites.
In this scenario, which two functions are provided by the PE router? (Choose two )
- A. It maintains all customer Layer 3 routing information.
- B. It maintains an MP-BGP session with each customer site to exchange customer routing information
- C. It selects the appropriate Layer 2 VPN in the service provider network.
- D. It maintains MPLS LSPs between the sites.
Answer: A,B
NEW QUESTION 67
Exhibit.
Referring to the exhibit which type of IPsec VPN should be used to create the desired topology?
- A. fully meshed VPN
- B. Group VPN
- C. hub-and-spoke VPN
- D. AutoVPN
Answer: B
NEW QUESTION 68
You 2 VPN services to interconnect three of their sites.
- A. It selects the appropriate circuit on which to traverse the Layer 2 VPN.
- B. It maintains all customer Layer 3 routing information.
- C. It maintains an MP-BGP session to all other sites to exchange route information for the Layer 2 VPN.
- D. In this scenario, what are two functions of the CE device? (Choose two.)
- E. It maintains all MPLS LSPs between the sites.
Answer: B,E
NEW QUESTION 69
You are deploying new WAN services between two routers and you are required to encrypt all traffic at Layer 2 Which solution would satisfy this requirement?
- A. IPsec
- B. MACsec
- C. RADIUS
- D. 802.1X
Answer: D
NEW QUESTION 70
Which two statements describe why service providers have migrated to IP/MPLS networks? (Choose two.)
- A. The MPLS ingress router encapsulates IP packets in an MPLS frame and forwards it to the next router in the path.
- B. A single router can be an ingress, egress or transit router for multiple LSPs simultaneously.
- C. MPLS virtualization allows a service provider to use statistical multiplexing to maximize resource utilization.
- D. MPLS labels enable several logically separated networks to share a common network infrastructure.
Answer: C,D
NEW QUESTION 71
Which Juniper Networks platform automates the orchestration of compute, storage, and networking resources to create and manipulate OpenStack clouds?
- A. NorthStar
- B. WANDL
- C. Contrail
- D. RingMaster
Answer: C
NEW QUESTION 72
Your applications are migrating from a legacy data center to an EVPN over a VXLAN-based VM environment. A few critical legacy applications not support this environment and must remain on bare metal servers and the applications must be able to access the Internet.
What must be included in the VXLAN design to satisfy these requirements?
- A. VTEP tunneling
- B. nested VM capability
- C. VXLAN gateway
- D. SR-IOV
Answer: C
Explanation:
https://www.juniper.net/documentation/en_US/release-independent/solutions/topics/concept/solutionevpn
-vxlan-understanding.html
NEW QUESTION 73
You are designing a service provider core network As part of the design, you must ensure that the MPLS network utilizes the traffic engineering database (TED) for path selection and resiliency. You have chosen OSPF as the IGP for your design.
In this scenario which statement is correct?
- A. You must disable traffic engineering in OSPF to use the TED.
- B. You must enable traffic engineering in OSPF to populate the TED.
- C. OSPF cannot be used to populate the TED.
- D. OSPF populates the TED by default.
Answer: B
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/example/ospf-traffic-engineeringenabling.html
NEW QUESTION 74
Your company's automation team is testing a controller-based solution for dynamic LSP management They do not want the topology acquisition process to allow the controller to become a transit node of the core network's.
Which solution would fulfill the requirements?
- A. PCCD
- B. PCEP
- C. BGP-LS
- D. BGP-LU
Answer: B
NEW QUESTION 75
You are asked to provide a proposal for a service provider's OSPF network. The customer is concerned about the volume of link-state advertisements within their network and want to limit this traffic.
Given this scenario which design component would satisfy the customer's requirement?
- A. Use the same AS number.
- B. Use multiple levels.
- C. Use the same router IDs.
- D. Use multiple areas.
Answer: D
NEW QUESTION 76
You are designing a solution for an energy trading organization that allows them to stream natural gas prices to trading partners. Prices will be streamed to trading partners using the Internet. Trading regulations require that any trading data streamed over a public network must be encrypted and authenticated.
Which connectivity solution meets these requirements?
- A. L3VPN
- B. L2VPN
- C. VPLS
- D. IPsec
Answer: D
NEW QUESTION 77
Your customer is deploying a large number of Juniper WAN edge devices spread across several remote locations. The customer wants to create an isolated out-of-band management network where these devices can be securely accessed and managed using the CLI and, where possible, the WebUI Which two statements will satisfy the customer's requirements'? (Choose two)
- A. Implement a management configuration group on all WAN edge devices.
- B. Enable the SSH and HTTPS services on each WAN edge device
- C. Place all management interfaces on a common Layer 2 network
- D. Ensure the devices are running the FIPS version of the Junos OS.
Answer: B,D
NEW QUESTION 78
You are creating a WAN solution design for an enterprise customer. The customer will be connecting three sites in different locations. The customer wants all of the sites to be part of the same Layer 2 network.
In this scenario, what are two valid connection methods that you would provide in your design? (Choose two.)
- A. VPLS
- B. Layer 3 VPN
- C. Layer 2 VPN
- D. Internet WAN
Answer: C,D
NEW QUESTION 79
You work for a service provider that currently uses a full mesh of IBGP peers to share EBGP routes. You are concerned about future scalability with this model and have decided to use route reflectors to overcome the scale limitations associated with the full mesh model.
In this scenario, which statement is true?
- A. Route reflectors do not change existing IBGP next hops by default.
- B. Cluster IDs must be configured on all IBGP peers.
- C. Private autonomous system numbers must be configured on all IBGP peers.
- D. Route reflectors readvertise both the active and backup routes
Answer: C
NEW QUESTION 80
You are responding to an RFP for a services provider that wants to upgrade their MPLS/LDP network to use traffic engineering.
Which two statements are correct in this scenario? (Choose two )
- A. Segment routing uses LDP for label adjacency making it backward-compatible with LDP.
- B. RSVP-TE requires a controller for bandwidth reservations.
- C. Segment routing requires a controller for bandwidth reservations
- D. RSVP-TE creates session states on core routers.
Answer: C,D
NEW QUESTION 81
You are designing a new service provider network and need to select a label distribution mechanism that guides certain types of traffic along specific paths within the network.
Which two label distribution mechanisms would satisfy the requirements? (Choose two.)
- A. LDP
- B. segment routing
- C. RSVP
- D. BGP-LU
Answer: A,C
NEW QUESTION 82
Your customer wants to enable their MX Series core so that a controller can dynamically manage their LSPs.
Which protocol provides this capability?
- A. PCRF
- B. PCEP
- C. BGP-LS
- D. BGP-LU
Answer: B
NEW QUESTION 83
You want to migrate your network from using Draft-Rosen to multicast VPN, Due to functional similarities, it will help operations personnel make the transition if they are familiar with certain technologies In this scenario, which technology would be helpful?
- A. Layer 2 VPNs
- B. hierarchical VPLS
- C. Layer 3 VPNs
- D. VPLS with point-to-multipoint LSPs
Answer: D
NEW QUESTION 84
Your team manages a WAN consisting of multiple customer MPLS tunnels. You are asked to design an SDN WAN solution capable of signaling LSPs to avoid nodes or links before they are removed from the network for service.
Which Juniper Network's SDN WAN solution satisfies these requirements?
- A. NorthStar Controller Bandwidth Calendaring
- B. NorthStar Planner Failure Simulation
- C. NorthStar Controller Maintenance Mode
- D. NorthStar Planner Path Design
Answer: D
NEW QUESTION 85
......
Juniper JN0-1362 Dumps - Secret To Pass in First Attempt: https://www.examcollectionpass.com/Juniper/JN0-1362-practice-exam-dumps.html