JNCDS-SP JN0-1362 Real Exam Questions and Answers FREE Updated on Sep 17, 2021
JN0-1362 Ultimate Study Guide - ExamcollectionPass
NEW QUESTION 17
Your customer's enterprise is adding geographically-dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost but the branches must remain secure with low latency.
Which type of Internet access model satisfies the customer's requirement in this scenario?
- A. centralized model with security at each branch
- B. distributed model with security at the hub
- C. centralized model with security at the hub
- D. distributed model with security at each branch
Answer: D
NEW QUESTION 18
Your WAN links are on a VPLS service from a single service provider. You must verify device configuration power and status in the event of a service outage.
Which two actions provide out-of-band management to your edge routers? (Choose two)
- A. Connect each Ethernet management interface to a dedicated switch with traffic routed on its own subnet on the VPLS service
- B. Connect each serial management port to a console server with a cellular Internet connection
- C. Connect each Ethernet management interface to a dedicated switch with its own WAN connection.
- D. Place management traffic on a separate VLAN on the VPLS service
Answer: B,C
Explanation:
https://www.wti.com/t-remote-console-and-power-management-for-juniper-switches-and-routers.aspx
NEW QUESTION 19
Which management platform automates and simplifies the management of Juniper Networks switching, routing, and security products?
- A. Junoscope
- B. Junosphere
- C. Junos Space
- D. Juniper Secure Analytics
Answer: C
NEW QUESTION 20
You are asked to design a DDoS prevention system to help mitigate denial-of-service attacks that target your customers. The management group wants to know the effect FlowSpec may have on current network operations if it is implemented as a solution.
In this scenario which two statements are correct? (Choose two )
- A. FlowSpec can block traffic based on stateful flow information.
- B. FlowSpec can block traffic based on the source address.
- C. FlowSpec requires Jflow implementation and licensing.
- D. FlowSpec can block traffic based on the destination address.
Answer: B,D
NEW QUESTION 21
You are creating a design proposal for a new service provider network using MX Series devices. You must design an OoB management network that is isolated from the production network.
In this scenario which two statements are correct? (Choose two)
- A. The FXPO interface can be used to connect devices to the management network.
- B. The management network should connect to a separate network infrastructure.
- C. You must use the console port to access the devices on the management network.
- D. The management network should connect to the production network infrastructure.
Answer: A,B
NEW QUESTION 22
You work for an organization providing hosting services for customer application VMs Traditional, your organization maintained isolation between customer workloads by assigning unique VLAN IDs to each customer network. Your organization is approaching the upper limit of 4094 VLANs available to uniquely identify customer networks You need to alleviate this limitation and provide more than 4094 unique network identifiers.
Which technology would satisfy these requirements?
- A. MP-BGP
- B. MPLS
- C. VXLAN
- D. EVPN
Answer: C
NEW QUESTION 23
You are asked to provide a proposal for a service provider's OSPF network. The customer is concerned about the volume of link-state advertisements within their network and want to limit this traffic.
Given this scenario which design component would satisfy the customer's requirement?
- A. Use the same AS number.
- B. Use the same router IDs.
- C. Use multiple areas.
- D. Use multiple levels.
Answer: C
NEW QUESTION 24
You are asked to design a BNG solution using MX Series routers You want to dynamically assign per-subscriber configuration parameters using VSAs.
Which external service is required to accomplish this task?
- A. TACACS
- B. RADIUS
- C. 802.1X
- D. DHCP
Answer: B
NEW QUESTION 25
Exhibit.
Referring to the exhibit, which two methods would be used by the designer of ISP E to ensure that traffic between ISP C and ISP A will traverse through ISP B? (Choose two.)
- A. Apply the BGP export policy (to IBGP peers) on R4 and R5 to adjust the MED on the ISP C routes so that the path through ISP D is less preferred.
- B. Apply the BGP import policy (to EBGP peers) on R4 anaVor R5 to adjust the local preference on the ISP C routes so that the path through ISP B is more preferred
- C. Apply the BGP import policy (to EBGP peers) on R4 to adjust the ORIGIN for the routes received from ISP B to unknown.
- D. Apply the BGP import policy (to EBGP peers) on R4 and R5 to modify the AS PATH attribute so that the path through ISP D is less preferred.
Answer: A,D
NEW QUESTION 26
Your customer wants to use NorthStar to communicate with network devices and acquire the MPLS topology.
Which protocol is recommended for this purpose?
- A. ISIS
- B. BGP-LS
- C. OSPF
- D. PIM-SSM
Answer: B
NEW QUESTION 27
You are creating an MPLS design proposal for a customer that requires traffic engineering features through their core MPLS network. The customer has edge routers that only support LDP signaling.
Which two features would you propose using in this scenario? (Choose two)
- A. RSVP tunneling
- B. LDP
- C. RSVP
- D. LDP tunneling
Answer: C,D
NEW QUESTION 28
Click the Exhibit button
Referring to the network design shown in the exhibit, you must ensure that VPN data between Site1 and Site2 will be earned over a single end-to-end LSP.
How would you advertise PE1's loopback address to accomplish this task?
- A. over a single EBGP session (IPv4 unicast NLRI) between PE1/PE4
- B. over BGP-LU sessions between the PE1/B1. B1/B2 and B2/PE4
- C. over a single MP-IBGP session (L3VPN NLRI) between PE1/PE4
- D. over a single IBGP session (IPv4 unicast NLRI) between PE VPE4
Answer: B
NEW QUESTION 29
You are designing several MPLS virtual routing and forwarding (VRF) instances on all provider edge (PE) routers. Routes within each VRF should be exchanged between all PE routers provisioned for that VRF.
For each VRF routing instance which two attributes must match on all related PE routers? (Choose two )
- A. interfaces
- B. router ID
- C. instance type
- D. VRF target
Answer: C,D
NEW QUESTION 30
You have a customer that operates multiple branch offices and they want a low cost access solution.
The WAN must be secure What would satisfy their requirement?
- A. a private WAN
- B. an encrypted MPLS service
- C. an IPsec VPN using broadband connections
- D. a managed MPLS service
Answer: C
NEW QUESTION 31
Your organization maintains container-based applications hosted by two different cloud service providers. You are asked to design a Layer 2 connection between the two cloud data centers. The data center interconnect solution must support control plane MAC learning.
Which Layer 2 data center interconnect model satisfies this requirement?
- A. VPLS
- B. L3VPN
- C. EVPN
- D. L2VPN
Answer: C
NEW QUESTION 32
You are asked to improve the convergence time in your large enterprise WAN Each branch office network is multihomed to two central aggregation points using BGP.
Which action would satisfy the requirement?
- A. Provision more WAN bandwidth.
- B. Increase interface hold timers.
- C. Use Bidirectional Forwarding Detection.
- D. Decrease interface hold timers.
Answer: C
NEW QUESTION 33
Which technology allows a router to continue to forward packets even if the routing protocol adjacencies go down?
- A. nonstop bridging
- B. graceful restart
- C. graceful Routing Engine switchover
- D. nonstop routing
Answer: B
NEW QUESTION 34
You work for a service provider and are designing an L3VPN with Internet access solution for a customer using Provider Independent (PI) IPv6 space.
Which networking designs will work for this customer?
- A. Use NAT64 to convert PI space to your public IPv6 space set up 6VPE routing instances on your PE routers for the customer
- B. Use NAT66 to convert PI space to your public IPv6 space set up 6PE on your PE routers to transport IPv6 traffic natively.
- C. Use NAT64 to convert PI space to IPv4 internet addresses, set up 6VPE routing instances on your PE routers for the customer.
- D. Use NAT64 to convert PI space to IPv4 Internet addresses set up 6PE on your PE routers to transport IPv4 traffic natively.
Answer: C
NEW QUESTION 35
Your customer's WAN edge connects to two service providers SP-A and SP-B. The customer is advertising a single /22 subnet to both service providers through EBGP peering sessions. The customer wants to influence inbound traffic to the advertised /22 destination prefix so that it passes through SP-A when both paths are operational.
Which action meets the customer's requirement?
- A. Advertise the prefix to SP-A with a lower MED value than that sent to SP-B.
- B. Advertise the prefix to SP-B with an origin of unknown.
- C. Advertise the prefix to SP-B with a lower MED value than that sent to SP-A.
- D. Advertise the prefix to SP-A with an origin of unknown.
Answer: A
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/med-attribute.html
NEW QUESTION 36
You are designing an EVPN data center solution with VXLAN.
Which two statements are true in this scenario? (Choose two)
- A. The original MAC address is advertised to remote PEs.
- B. The original MAC address is prepended to a VXLAN VNI.
- C. The original MAC address is replaced by a VXLAN VNI.
- D. The original MAC address is encapsulated within the VXLAN frame.
Answer: A,D
NEW QUESTION 37
Your company is considering how to add more visibility in their WAN MPLS links.
Which Juniper Networks product provides this type of traffic management?
- A. JSA Series
- B. NorthStar
- C. AppFormix
- D. Contrail
Answer: B
NEW QUESTION 38
......
Ultimate Guide to Prepare JN0-1362 Certification Exam for JNCDS-SP: https://www.examcollectionpass.com/Juniper/JN0-1362-practice-exam-dumps.html