[Jun 24, 2026] 156-315.81 PDF Questions and Testing Engine With 634 Questions
Updated Exam Engine for 156-315.81 Exam Free Demo & 365 Day Updates
The CheckPoint 156-315.81 exam is designed to test the candidate's ability to design, implement, and manage complex security solutions using Check Point's security products. It is aimed at professionals who have already gained experience working with Check Point products and want to take their skills to the next level. 156-315.81 exam is designed to be challenging and requires a deep understanding of the technology and concepts covered.
NEW QUESTION # 94
The admin lost access to the Gaia Web Management Interface but he was able to connect via ssh. How can you check if the web service is enabled, running and which port is used?
- A. In dish run >show web ssl-port to see if the web daemon is enabled and which port is in use. In expert mode run #netstat -anp | grep httpd2 to see if the httpd2 is up
- B. In dish run >show web ssl-port to see if the web daemon is enabled and which port is in use. In expert mode run #netstat -anp | grep httpd to see if the httpd is up
- C. In expert mode run #netstat -tulnp | grep httpd2 to see if httpd2 is up and to get the port number. In dish run >show web daemon-enable to see if the web daemon is enabled.
- D. In expert mode run #netstat -tulnp | grep httpd to see if httpd is up and to get the port number. In dish run >show web daemon-enable to see if the web daemon is enabled.
Answer: A
Explanation:
The correct way to check if the web service is enabled, running and which port is used is to use option C. In dish, run show web ssl-port to see if the web daemon is enabled and which port is in use. In expert mode, run netstat -anp | grep httpd2 to see if the httpd2 is up1. The httpd2 service is responsible for the Gaia Web Management Interface2. If the web daemon is disabled, you can enable it by running set web daemon-enable on in dish3. If the httpd2 service is down, you can start it by running service httpd2 start in expert mode4. Reference: Gaia WebUI and CLI - Check Point CheckMates, Gaia R81.20 Administration Guide - Check Point Software, Gaia R81 Administration Guide - Check Point Software, How to restart Gaia Portal (WebUI) process - Check Point Software
NEW QUESTION # 95
What should the admin do in case the Primary Management Server is temporary down?
- A. The Secondary will take over automatically Change the IP in SmartConsole to logon to the private IP of the Secondary Management Server.
- B. Use the VIP in SmartConsole you always reach the active Management Server.
- C. Run the 'promote_util' to activate the Secondary Management server
- D. Logon with SmartConsole to the Secondary Management Server and choose "Make Active' under Actions in the HA Management Menu
Answer: B
Explanation:
High Availability (HA) is a deployment scenario where two or more Security Management Servers are configured to work together as a cluster. One server acts as the Primary server and handles all management operations, while another server acts as the Secondary server and serves as a backup. If the Primary server fails, the Secondary server takes over and becomes active. The cluster members communicate using a Virtual IP (VIP) address, which is used by SmartConsole to connect to the active server. If the Primary server is temporarily down, the administrator does not need to do anything, as SmartConsole will automatically connect to the VIP address and reach the Secondary server that has become active. Therefore, the correct answer is A.
NEW QUESTION # 96
An established connection is going to www.google.com. The Application Control Blade Is inspecting the traffic. If SecureXL and CoreXL are both enabled, which path is handling the traffic?
- A. Slow Path
- B. Medium Path
- C. Fast Path
- D. Accelerated Path
Answer: D
NEW QUESTION # 97
Which component is NOT required to communicate with the Web Services API?
- A. API key
- B. content-type
- C. Request payload
- D. session ID token
Answer: A
NEW QUESTION # 98
You want to store the GAIA configuration in a file for later reference. What command should you use?
- A. write mem <filename>
- B. save configuration <filename>
- C. show config -f <filename>
- D. save config -o <filename>
Answer: B
Explanation:
The correct command to store the GAIA configuration in a file is save configuration <filename>1. This will create a file with the current system level configuration in the home directory of the current user1. The other commands are incorrect because they either do not exist or do not save the configuration to a file. Reference: 1: Backing up Gaia system level configuration(https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk102234)
NEW QUESTION # 99
Which Check Point process provides logging services, such as forwarding logs from Gateway to Log Server, providing Log Export API (LEA) & Event Logging API (EL-A) services.
- A. CPVIEWD
- B. FWD
- C. DASSERVICE
- D. CPD
Answer: B
Explanation:
The FWD process provides logging services, such as forwarding logs from Gateway to Log Server, providing Log Export API (LEA) and Event Logging API (EL-A) services. The FWD process is responsible for sending logs from the Security Gateway to the Security Management Server or Log Server, and for fetching logs from the Security Management Server or Log Server to SmartConsole. The FWD process also handles the communication with external logging applications that use the LEA or EL-A protocols.
References:
FWD process does not work after reboot - Check Point CheckMates, section "FWD process does not work after reboot" Check Point R81, section "Logging and Monitoring" CoreXL Dynamic Dispatcher - Check Point Software, section "Example of output"
NEW QUESTION # 100
Joey want to configure NTP on R81 Security Management Server. He decided to do this via WebUI. What is the correct address to access the Web UI for Gaia platform via browser?
- A. Error! Hyperlink reference not valid.
- B. Error! Hyperlink reference not valid.
- C. Error! Hyperlink reference not valid.
- D. Error! Hyperlink reference not valid. IP_Address>:443
Answer: B
NEW QUESTION # 101
Which of the following Check Point processes within the Security Management Server is responsible for the receiving of log records from Security Gateway?
- A. cpd
- B. fwd
- C. fwm
- D. logd
Answer: B
Explanation:
The fwd process within the Security Management Server is responsible for the receiving of log records from Security Gateway. The fwd process handles the communication with the Security Gateways and log servers via TCP port 2571. The other processes have different roles, such as logd for writing logs to the database, fwm for handling GUI clients, and cpd for infrastructure tasks2. Reference: Check Point Ports Used for Communication by Various Check Point Modules, Check Point Processes Cheat Sheet - LazyAdmins
NEW QUESTION # 102
Access roles allow the firewall administrator to configure network access according to:
- A. remote access clients.
- B. All of the above.
- C. users and user groups.
- D. a combination of computer or computer groups and networks.
Answer: B
Explanation:
Explanation
Access roles are objects that define a set of users, machines, or networks that can access a specific network resource. You can create access roles based on any combination of the following criteria:
Users and user groups: You can use users and user groups from various sources, such as LDAP, RADIUS, local database, etc.
Computers or computer groups: You can use computers or computer groups that are identified by their IP address, MAC address, or hostname.
Networks: You can use networks that are defined by their IP address range, subnet mask, or gateway.
You can use access roles in the Source or Destination column of an Access Control rule to allow or deny network access based on the identity of the users, machines, or networks.
The references are:
Check Point Certified Security Expert R81.20 (CCSE) Core Training, slide 11 Check Point R81 Quantum Security Gateway Guide, page 139 Check Point R81 Identity Awareness Administration Guide, page 9
NEW QUESTION # 103
How is communication between different Check Point components secured in R81? As with all questions, select the BEST answer.
- A. By using ICA
- B. By using SIC
- C. By using IPSEC
- D. By using 3DES
Answer: B
NEW QUESTION # 104
Which is NOT a SmartEvent component?
- A. Log Server
- B. SmartEvent Server
- C. Log Consolidator
- D. Correlation Unit
Answer: C
Explanation:
Explanation
Log Consolidator is NOT a SmartEvent component. SmartEvent is a unified security event management solution that provides visibility, analysis, and reporting of security events across multiple Check Point products. SmartEvent consists of three main components: SmartEvent Server, Correlation Unit, and Log Server. SmartEvent Server is responsible for storing and displaying security events in SmartConsole and SmartEventWeb. Correlation Unit is responsible for collecting and correlating logs from various sources and generating security events based on predefined or custom scenarios. Log Server is responsible for receiving and indexing logs from Security Gateways and other Check Point modules. Log Consolidator is not a valid component or blade of SmartEvent.
NEW QUESTION # 105
Which is the command to identify the NIC driver before considering about the employment of the Multi-Queue feature?
- A. ethtool A eth0
- B. show interface eth0 mq
- C. ip show Int eth0
- D. ifconfig -i eth0 verbose
Answer: A
Explanation:
Explanation
The command to identify the NIC driver before considering about the employment of the Multi-Queue feature is ethtool -i eth0, where eth0 is the name of the network interface. This command displays the information about the driver and firmware version of the NIC, as well as other details such as bus-info and supported features1. The Multi-Queue feature requires a NIC driver that supports multiple transmit and receive queues2.
References: : ethtool(8) - Linux man page : How To Configure Multi-Queue NICs | Linode Docs
NEW QUESTION # 106
Bob is going to prepare the import of the exported R81.20 management database. Now he wants to verify that the installed tools on the new target security management machine are able to handle the R81.20 release. Which of the following Check Point command is true?
- A. $FWDIR/scripts/migrate_server print_installed_tools -v R77.30
- B. $CPDIR/scripts/migrate_server print_installed_tools -v R81.20
- C. $FWDIR/scripts/migrate_server print_installed_tools -v R81.20
- D. $FWDIR/scripts/migrate_server print_uninstalled_tools -v R81.20
Answer: C
Explanation:
The correct Check Point command to verify that the installed tools on the new target security management machine are able to handle the R81.20 release is $FWDIR/scripts/migrate_server print_installed_tools -v R81.20. This command will print the list of installed migration tools and their versions, and check if they match the specified version (R81.20 in this case). If the tools are not installed or do not match, the command will print an error message3. Reference: Check Point R81 Installation and Upgrade Guide
NEW QUESTION # 107
Return oriented programming (ROP) exploits are detected by which security blade?
- A. Check Point Anti-Virus / Threat Emulation
- B. Data Loss Prevention
- C. Application control
- D. Intrusion Prevention Software
Answer: A
Explanation:
Explanation
Return-oriented programming (ROP) exploits are detected by Check Point Anti-Virus / Threat Emulation blade. ROP exploits are a type of code reuse attack that bypasses common exploit mitigation techniques such as Data Execution Prevention (DEP) and Address Space Layout Randomization (ASLR). Check Point Anti-Virus / Threat Emulation blade can detect and prevent ROP exploits using its behavioral analysis engine that monitors the execution flow of processes and identifies malicious patterns. References: [Check Point Security Expert R81 Threat Prevention Administration Guide], page 17.
NEW QUESTION # 108
You plan to automate creating new objects using new R81 Management API. You decide to use GAIA CLI for this task.
What is the first step to run management API commands on GAIA's shell?
- A. mgmt_admin@teabag > id.txt
- B. mgmt_login
- C. login user admin password teabag
- D. mgmt_cli login user "admin" password "teabag" > id.txt
Answer: B
Explanation:
Explanation
You plan to automate creating new objects using new R81 Management API. You decide to use GAIA CLI for this task.
The first step to run management API commands on GAIA's shell is mgmt_login. This command allows you to login to the management server and obtain a session ID, which is required for running other management API commands. You can also specify the user name and password as parameters, or enter them interactively.
The session ID is stored in the file $CPDIR/tmp/.api_session by default, unless you specify a different file name. References: R81 Management API Reference Guide, page 15.
NEW QUESTION # 109
......
Certification Topics of CheckPoint 156-315.81 Exam
Clustering and Acceleration
Advanced User Management
Auditing and Reporting
Advanced Firewall
Upgrading
The Check Point Certified Security Expert (CCSE) R81 certification is a widely recognized certification that validates the skills and knowledge required to configure, manage, and troubleshoot Check Point Security Gateway and Management Software Blades systems. It is aimed at security professionals who want to advance their careers by demonstrating their expertise in Check Point technologies. The CCSE R81 certification exam tests candidates on their ability to manage and maintain Check Point Security Gateways and Management Servers, troubleshoot network connections, configure VPNs, and implement advanced security policies.
Exam Passing Guarantee 156-315.81 Exam with Accurate Quastions: https://www.examcollectionpass.com/CheckPoint/156-315.81-practice-exam-dumps.html
Test Engine to Practice Test for 156-315.81 Valid and Updated Dumps: https://drive.google.com/open?id=17R0hoBzlYyNkaNCIfmRJ8LHXm9VDQAKw