156-315.81 Pre-Exam Practice Tests | (Updated 628 Questions)
Valid 156-315.81 Exam Q&A PDF - One Year Free Update
The Check Point Certified Security Expert R81 certification provides individuals with the skills and knowledge required to successfully design, implement, and manage a comprehensive security architecture using Check Point Security Gateway and Management Software Blades. Check Point Certified Security Expert R81 certification covers topics such as advanced firewall configuration, VPN, network address translation (NAT), and advanced user management. Check Point Certified Security Expert R81 certification is intended for security professionals who want to enhance their skills and knowledge in Check Point security solutions and stay up-to-date with the latest security trends and threats.
NEW QUESTION # 270
Capsule Connect and Capsule Workspace both offer secured connection for remote users who are using their mobile devices. However, there are differences between the two.
Which of the following statements correctly identify each product's capabilities?
- A. Workspace can support any application, whereas Connect has a limited number of application types which it will support.
- B. For compliance/host checking, Workspace offers the MDM cooperative enforcement, whereas Connect offers both jailbreak/root detection and MDM cooperative enforcement.
- C. Workspace supports ios operating system, Android, and WP8, whereas Connect supports ios operating system and Android only
- D. For credential protection, Connect uses One-time Password login support and has no SSO support, whereas Workspace offers both One-Time Password and certain SSO login support.
Answer: D
NEW QUESTION # 271
Choose the correct syntax to add a new host named "emailserver1" with IP address 10.50.23.90 using GAiA Management CLI?
- A. mgmt_cli add host name "emailserver1" ip-address 10.50.23.90
- B. mgmt_cli add host "emailserver1" address 10.50.23.90
- C. mgmt_cli add host name ip-address 10.50.23.90
- D. mgmt_cli add host name "myHost12 ip" address 10.50.23.90
Answer: A
Explanation:
The correct syntax to add a new host named "emailserver1" with IP address 10.50.23.90 using GAiA Management CLI is mgmt_cli add host name "emailserver1" ip-address 10.50.23.90. The name and ip-address parameters are required and must be enclosed in double quotes. The other options are missing the double quotes or have incorrect parameter names1. Reference: 1: Check Point Software, Getting Started, Adding a Host.
NEW QUESTION # 272
You had setup the VPN Community VPN-Stores'with 3 gateways. There are some issues with one remote gateway(1.1.1.1) and an your local gateway. What will be the best log filter to see only the IKE Phase 2 agreed networks for both gateways
- A. Blade:"VPN" AND VPN-Stores AND Main Mode
- B. Blade:"VPN" AND VPN-Stores AND Quick Mode
- C. action:"Key Install" AND 1.1.1.1 AND Main Mode
- D. action:"Key Install- AND 1.1.1.1 ANDQuick Mode
Answer: A
NEW QUESTION # 273
GAIA greatly increases operational efficiency by offering an advanced and intuitive software update agent, commonly referred to as the:
- A. Check Point Remote Installation Daemon (CPRID)
- B. Check Point Software Update Daemon
- C. Check Point Software Update Agent
- D. Check Point Update Service Engine
Answer: D
Explanation:
Explanation
GAIA greatly increases operational efficiency by offering an advanced and intuitive software update agent, commonly referred to as the Check Point Update Service Engine. This agent allows you to download and install software updates, hotfixes, upgrade packages, etc., from Check Point servers or from a local repository.
The Check Point Update Service Engine can be accessed via SmartConsole or via WebUI or CLI on GAIA.
References: [Gaia Administration Guide R81], page 77.
NEW QUESTION # 274
Fill in the blank RADIUS protocol uses_____to communicate with the gateway
- A. TDP
- B. UDP
- C. CCP
- D. HTTP
Answer: B
NEW QUESTION # 275
What are the two high availability modes?
- A. New and Legacy
- B. Traditional and New
- C. Active and Standby
- D. Load Sharing and Legacy
Answer: A
Explanation:
ClusterXL has four working modes. This section briefly describes each mode and its relative advantages and disadvantages.
NEW QUESTION # 276
For best practices, what is the recommended time for automatic unlocking of locked admin accounts?
- A. 20 minutes
- B. 15 minutes
- C. 30 minutes at least
- D. Admin account cannot be unlocked automatically
Answer: C
Explanation:
Explanation
For best practices, the recommended time for automatic unlocking of locked admin accounts is 30 minutes at least. Admin accounts can be locked due to failed login attempts, password expiration, or manual locking by another admin. To prevent unauthorized access or brute force attacks, locked admin accounts should not be unlocked automatically too soon. The recommended minimum time for automatic unlocking is 30 minutes, which can be configured from the SmartConsole under Manage > Permissions and Administrators > Advanced
> Unlock locked administrators after.
NEW QUESTION # 277
By default how often updates are checked when the CPUSE Software Updates Policy is set to Automatic?
- A. Six times per day
- B. Seven times per day
- C. Every three hours
- D. Every two hours
Answer: C
Explanation:
By default, when the CPUSE Software Updates Policy is set to Automatic, updates are checked every three hours3. This means that the CPUSE agent will automatically download and install updates that match the policy settings every three hours. The other options are not the default values for the CPUSE Software Updates Policy. Reference: 3: Check Point Software, Getting Started, CPUSE Software Updates Policy.
NEW QUESTION # 278
NO: 180
What command can you use to have cpinfo display all installed hotfixes?
- A. cpinfo -hf
- B. cpinfo -y all
- C. cpinfo -get hf
- D. cpinfo installed_jumbo
Answer: B
Explanation:
The command cpinfo -y all can be used to have cpinfo display all installed hotfixes. Cpinfo is a tool that collects diagnostic data from a Check Point gateway or management server. The data includes configuration files, logs, status reports, and more. The -y parameter is used to specify which sections of data to include in the cpinfo output. The value all means to include all sections, including the hotfixes section, which shows the list of hotfixes installed on the system. Reference: Check Point Security Expert R81 Course, cpinfo Utility
NEW QUESTION # 279
Which is NOT an example of a Check Point API?
- A. OPSEC SDK
- B. Management API
- C. Threat Prevention API
- D. Gateway API
Answer: D
Explanation:
Gateway API is NOT an example of a Check Point API. Check Point API is a general term that refers to various application programming interfaces (APIs) that allow external applications to interact with Check Point products and services using standard methods such as HTTP(S) requests and JSON objects. There are several types of Check Point APIs, such as Management API, Threat Prevention API, OPSEC SDK, etc. Management API is an API that allows external applications to configure, manage, and monitor Check Point management server using web services. Threat Prevention API is an API that allows external applications to send files or URLs to Check Point Threat Prevention products for scanning and analysis using web services. OPSEC SDK is an API that allows external applications to integrate with Check Point OPSEC products using C/C++ libraries and protocols. Gateway API is not a valid or existing type of Check Point API.
NEW QUESTION # 280
What is the command to check the status of Check Point processes?
- A. cphaprob list
- B. top
- C. cptop
- D. cpwd_admin list
Answer: D
Explanation:
Explanation
The command to check the status of Check Point processes is cpwd_admin list. This command displays the process ID, name, state, start time, and watchdog status of all the processes that are monitored by the Check Point WatchDog daemon (CPWD). You can also use this command to start, stop, or restart a specific process.
References: [cpwd_admin Command]
NEW QUESTION # 281
NAT rules are prioritized in which order?
1. Automatic Static NAT
2. Automatic Hide NAT
3. Manual/Pre-Automatic NAT
4. Post-Automatic/Manual NAT rules
- A. 3, 1, 2, 4
- B. 4, 3, 1, 2
- C. 1, 2, 3, 4
- D. 1, 4, 2, 3
Answer: C
Explanation:
Explanation
NAT rules are prioritized in the following order:
Automatic Static NAT: This is the highest priority NAT rule and it translates the source or destination IP address to a different IP address without changing the port number. It is configured in the network object properties.
Automatic Hide NAT: This is the second highest priority NAT rule and it translates the source IP address and port number to a different IP address and port number. It is configured in the network object properties.
Manual/Pre-Automatic NAT: This is the third highest priority NAT rule and it allows you to create custom NAT rules that are not possible with automatic NAT. It is configured in the NAT policy rulebase before the automatic NAT rules.
Post-Automatic/Manual NAT rules: This is the lowest priority NAT rule and it allows you to create custom NAT rules that are not possible with automatic NAT. It is configured in the NAT policy rulebase after the automatic NAT rules.
NEW QUESTION # 282
What is the command to check the status of Check Point processes?
- A. cphaprob list
- B. top
- C. cptop
- D. cpwd_admin list
Answer: D
NEW QUESTION # 283
Which Check Point daemon invokes and monitors critical processes and attempts to restart them if they fail?
- A. cpd
- B. cpm
- C. cpwd
- D. fwm
Answer: C
Explanation:
Explanation
The Check Point WatchDog daemon (cpwd) invokes and monitors critical processes and attempts to restart them if they fail. The cpwd daemon is responsible for starting processes such as cpd, cpm, fwm, fwd, and others. The cpd daemon is the Check Point Management daemon that handles communication between SmartConsole applications and Security Management Servers. The cpm daemon is the Check Point Management Server daemon that handles database operations and policy installation. The fwm daemon is the Firewall Management daemon that handles communication between Security Gateways and Security Management Servers. References: : Check Point Software, Getting Started, WatchDog Daemon; : Check Point Software, Getting Started, Processes.
NEW QUESTION # 284
What command verifies that the API server is responding?
- A. app_get_status
- B. api stat
- C. api status
- D. show api_status
Answer: C
Explanation:
Explanation
The API server is a service that runs on the Security Management Server and enables external applications to communicate with the Check Point management database using REST APIs. You can verify that the API server is responding by using the following command in Expert mode:
This command will display the current status of the API server, such as running, stopped, or initializing. It will also show the API version, port number, and SSL certificate information. References: Check Point R81 REST API Reference Guide
NEW QUESTION # 285
Which of the following is NOT supported by CPUSE?
- A. Installation of private hotfixes
- B. Offline installations
- C. Automatic download of hotfixes
- D. Automatic download of full installation and upgrade packages
Answer: B
Explanation:
The option that is not supported by CPUSE is offline installations. CPUSE (Check Point Update Service Engine) is a Gaia software update agent that manages software updates on Gaia OS and Check Point products. It requires an internet connection to download and install updates from the Check Point Cloud or a local Deployment Agent. The other options are supported by CPUSE. It can automatically download full installation and upgrade packages, hotfixes, and private hotfixes. It can also install them manually or automatically according to a schedule. Reference: [CPUSE Overview]
https://sc1.checkpoint.com/documents/R77/CP_R77_Gaia_AdminWebAdminGuide/ html_frameset.htm?topic=documents/R77/CP_R77_Gaia_AdminWebAdminGuide/112109
NEW QUESTION # 286
Which statement is WRONG regarding the usage of the Central Deployment in SmartConsole?
- A. Only be installed Hotfixes can with the Central Deployment in SmartConsole
- B. You can upgrade your cluster without user intervention with the Central Deployment in SmartConsole from R80.40 to R81.10.
- C. You can install Hotfixes with the Central Deployment in SmartConsole
- D. You can install Jumbo Hotfix accumulators with the Central Deployment in SmartConsole.
Answer: A
Explanation:
Explanation
The statement that is wrong regarding the usage of the Central Deployment in SmartConsole is that only be installed Hotfixes can with the Central Deployment in SmartConsole. This is wrong because Central Deployment can also be used to install Jumbo Hotfix accumulators, upgrade clusters, and perform other operations on multiple gateways simultaneously. Central Deployment simplifies and automates the deployment process and reduces human errors and downtime. References: [Check Point Security Expert R81 Administration Guide], page 23.
NEW QUESTION # 287
What is NOT a Cluster Mode?
- A. Load Sharing Unicast
- B. Active-Active
- C. Load Sharing Multicast
- D. High Availability Multicast
Answer: B
NEW QUESTION # 288
In which formats can Threat Emulation forensics reports be viewed in?
- A. PDF and HTML
- B. PDF, HTML, and XML
- C. PDF and TXT
- D. TXT, XML and CSV
Answer: B
Explanation:
The formats in which Threat Emulation forensics reports can be viewed in are PDF, HTML, and XML. Threat Emulation is a feature that detects and prevents zero-day attacks by emulating files in a sandbox environment and analyzing their behavior. Threat Emulation generates forensics reports that provide detailed information about the emulated files, such as verdict, severity, activity summary, screenshots, network activity, registry activity, file activity, and process activity. These reports can be viewed in PDF, HTML, or XML formats from SmartConsole or SmartView.
NEW QUESTION # 289
You are the administrator for ABC Corp. You have logged into your R81 Management server. You are making some changes in the Rule Base and notice that rule No.6 has a pencil icon next to it.
What does this mean?
- A. This rule No. 6 has been marked for editing in another Management session.
- B. This rule No. 6 has been marked for deletion in another Management session.
- C. This rule No. 6 has been marked for deletion in your Management session.
- D. This rule No. 6 has been marked for editing in your Management session.
Answer: D
Explanation:
You are the administrator for ABC Corp. You have logged into your R81 Management server. You are making some changes in the Rule Base and notice that rule No.6 has a pencil icon next to it.
This means that rule No.6 has been marked for editing in your Management session. In R81, every administrator works in a session that is independent of other administrators. Changes made by one administrator are not visible to others until they are published. When you edit a rule, it is marked with a pencil icon to indicate that it has been modified in your session. You can also lock a rule to prevent other administrators from editing it until you unlock it or publish your session. Reference: R81 Security Management Administration Guide, page 43.
NEW QUESTION # 290
The Check Point history feature in R81 provides the following:
- A. View install changes
- B. Policy Installation Date, view install changes and install specific version
- C. View install changes and install specific version
- D. Policy Installation Date only
Answer: D
NEW QUESTION # 291
......
Why do you need to get CheckPoint 156-315.81 Exam
Are you ready to take the Check Point Certified Security Expert R81 Exam
CheckPoint 156-315.81: Key Points and Focus Areas
In order to pass the 156-315.81 exam, you need to prepare the best possible exam prep materials.
So many students just buy a prep book and hope for the best. But when they don't get the results they expected, they think it must be their fault, and quit.
There are some people who believe that because they haven't had a good result from studying with the materials in a prep book, then that means that they will never pass. But in reality, they have probably only studied with those prep books for a short time and have yet to actually put in enough time and effort to study with them properly. CheckPoint 156-315.81 exam dumps can help you to pass the exam easily.
In this article, I'm going to give you a simple and effective way to prepare for the 156-315.81 exam, so you don't have to struggle with finding the right materials to study with anymore.
So if you want to start preparing for the 156-315.81 exam today, then read on…
Check Point Certified Security Expert R81 Free Update Certification Sample Questions: https://www.examcollectionpass.com/CheckPoint/156-315.81-practice-exam-dumps.html
Trend for CheckPoint 156-315.81 pdf dumps before actual exam: https://drive.google.com/open?id=1L0Vjr7UHGcqfKTxAOnYWs7ImBpLUm-T5