Verified DES-1221 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump from ExamcollectionPass
Pass DCS-IE DES-1221 Exam With 62 Questions
What is the cost of Specialist â Implementation Engineer, PowerStore Solutions Version 1.0
- Format: Multiple choices, multiple answers
- Length of Examination: 90 minutes
- Passing Score: 70%
- Number of Questions: 40
NEW QUESTION 37
A customer is new to PowerStore and asks if there are any differences between the A and B back-end ports. What is the correct response?
- A. "A" ports are output ports and "B" ports are input ports
- B. "A" ports are input ports and "B" ports are output ports
- C. All ports on the base enclosure are output ports
- D. All ports on the base enclosure are input ports
Answer: B
NEW QUESTION 38
Which type of network is used for storage migration between appliances?
- A. Inter-node network
- B. Intra-Cluster Management network
- C. Intra-Cluster Data network
- D. Storage network
Answer: C
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-ntwk-plang/powerstore-t-model- appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1b&lang=en-us
NEW QUESTION 39
What does the remote replication Failover operation do?
- A. Fully synchronizes the source and destination data states and stops the current replication session
- B. Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy
- C. Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state
- D. Fully synchronizes the source and destination data states and reverses the replication direction
Answer: B
Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-25-dae/pwrstr-protect-data/replication?guid=guid-7641aeec-982e-4e4e-85fb-c50f525635db&lang=en-us
NEW QUESTION 40
Which network is used by the PowerStore for communication to the cluster database?
- A. ICM
- B. ICD
- C. IDN
- D. inter-node
Answer: D
Explanation:
Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000t/pwrstr-ntwk-plang/powerstore-t- model-appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1b
NEW QUESTION 41
What is the recommended Windows multi-pathing policy for block volumes on a PowerStore array?
- A. FailOver
- B. Least QueueDepth
- C. Round-Robin
- D. Least Weighted Paths
Answer: C
Explanation:
Reference: https://www.delltechnologies.com/en-us/collaterals/unauth/technical-guides-support-information/ products/storage-2/docu5134.pdf
NEW QUESTION 42
Which administrator tasks are needed to increase the size of a VMFS datastore without the use of the VSI plugin, mounted to an external ESXi host?
- A. Change the size of the datastore in vSphere and restart the VAAI service in PowerStore Manager
- B. Change the volume size in PowerStore Manager and refresh the size of the datastore in vSphere
- C. Change the size of the datastore in vSphere and refresh the size of the volume in PowerStore Manager
- D. Change the volume size in PowerStore Manager and restart the VASA service in vSphere
Answer: B
NEW QUESTION 43
How is the upgrade process on a multi-appliance cluster run?
- A. Master appliance primary node first, then the peer node
- B. On one node at a time
- C. On all primary nodes first, then peer nodes
- D. In parallel on all nodes
Answer: A
NEW QUESTION 44
What is the significance of the warning given when a volume with data services is deleted?
- A. Snapshot is present on the volume
- B. Volume is mapped to a host
- C. Volume is participating in a migration
- D. Protection policy is configured on the volume
Answer: A
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-cfg-vols/delete-a-volume?
guid=guid-26e8c12d-a3df-4d4d-8012-ae2ef9e53721&lang=en-us
NEW QUESTION 45
A PowerStore T cluster has 3 appliances. Users are unable to access NAS services. What might be the issue?
- A. Trial license is expired
- B. Resource balancer service has failed
- C. Master appliance is off-line
- D. NAS appliance failover is incorrectly configured
Answer: D
NEW QUESTION 46
1.a.1 What is the maximum number of appliances that can be connected to form a cluster?
- A. 4 in a PowerStore T cluster, 4 in a PowerStore X cluster
- B. 1 in a PowerStore T cluster, 1 in a PowerStore X cluster
- C. 4 in a PowerStore T cluster, 1 in a PowerStore X cluster
- D. 1 in a PowerStore T cluster, 4 in a PowerStore X cluster
Answer: C
Explanation:
Reference:
https://www.delltechnologies.com/en-us/collaterals/unauth/white-papers/products/storage/h18149- dell-emc-powerstore-platform-introduction.pdf
NEW QUESTION 47
Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?
- A. Two 25 GbE
- B. Four 1 GbE
- C. Two 10 GigE
- D. Two 100 GigE
Answer: D
NEW QUESTION 48
What describes the process used in the Import External Storage migration architecture?
- A. Plugin on PowerStore communicates over the data path to orchestrator on the host and controls the multipathing active path to storage
- B. Plugin on PowerStore communicates over the control path to orchestrator on the host and controls the multipathing active path to storage
- C. Orchestrator on PowerStore communicates over the data path to the host plugin and controls the multipathing active path to storage
- D. Orchestrator on PowerStore communicates over the control path to the host plugin and controls the multipathing active path to storage
Answer: A
Explanation:
Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5
NEW QUESTION 49
Which network is used by the PowerStore for communication to the cluster database?
- A. ICM
- B. ICD
- C. inter-node
- D. IDN
Answer: A
NEW QUESTION 50
What describes the Import External Storage feature?
- A. A native data migration feature of PowerStore that imports external block storage to PowerStore
- B. An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage
- C. A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation
- D. A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems
Answer: A
NEW QUESTION 51
You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:
1) Check the OS version and license status.
2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 10
3) Enable the port
4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.50
5) Enable RSTP with priority 4096
6) Commit and exit.
Answer:
Explanation:
check the answer below in explanation.
Explanation
Below are the exhibits solution for this simulation.
NEW QUESTION 52
How many cables are required for minimum support for PowerStore T Front-End storage connectivity?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 53
At what point in the configuration of an External Storage Import session does the data path from the host to the PowerStore system become the active IO path?
- A. As MPIO restarts on the host
- B. When the import session begins
- C. Before launching the Import Storage wizard
- D. During the ImportKit installation
Answer: B
NEW QUESTION 54
1.a.1 What is the maximum number of appliances that can be connected to form a cluster?
- A. 4 in a PowerStore T cluster, 4 in a PowerStore X cluster
- B. 1 in a PowerStore T cluster, 1 in a PowerStore X cluster
- C. 4 in a PowerStore T cluster, 1 in a PowerStore X cluster
- D. 1 in a PowerStore T cluster, 4 in a PowerStore X cluster
Answer: C
NEW QUESTION 55
......
Pass DES-1221 Tests Engine pdf - All Free Dumps: https://www.examcollectionpass.com/EMC/DES-1221-practice-exam-dumps.html