[Sep-2021] Valid Way To Pass Network Appliance Exam Dumps with NS0-194 Exam Study Guide
All NS0-194 Dumps and NetApp Certified Support Engineer Training Courses Help candidates to study and pass the Exams hassle-free!
NEW QUESTION 93
You just deployed Unified Manager 6.x on a server running Red Hat. You attempt to log in to the UI with your Windows domain account but it fails.
Which two actions must be taken to solve this problem? (Choose two.)
- A. You must configure Red Hat for AD LDAP.
- B. You must add the user within Unified Manager.
- C. You must configure Unified Manager for LDAP.
- D. You must add the user within Red Hat.
Answer: B,C
NEW QUESTION 94
You are creating a disk-partitioned root aggregate.
Which two rules are enforced automatically when accomplishing this task? (Choose two.)
- A. A RAID group cannot have more than one partition from the same disk.
- B. A RAID group can have more than one partition from the same disk.
- C. The only supported RAID type for aggregates containing root-data partitioned disks is RAID 4.
- D. The only supported RAID type for aggregates containing root-data partitioned disks is RAID-DP.
Answer: A,D
NEW QUESTION 95
A customer recently had a controller module failure on a FAS62xx system running clustered Data ONTAP 8.3.1.
The controller module had been replaced last night and everything is working well but the customer noticed warnings concerning licensing on the console. The warnings say there is a grace period of 89 days remaining.
In this scenario, what should be done to solve this problem?
- A. Collect the new license keys from the new controller module packaging and install them using the appropriate commands.
- B. Obtain new 8.2x format license keys and install them using the appropriate commands.
- C. Apply the previously used license keys using the appropriate commands.
- D. Execute a system restore to recover the previous license keys, and then apply to the new controller module.
Answer: B
NEW QUESTION 96
You have a 4-node MetroCluster configuration. The systems are operating normally with no faults.
In this scenario, which statement describes the usage of NVRAM when a host sends a write to a node?
- A. Incoming writes are written to the receiving node's NVRAM and its HA partner's NVRAM only.
- B. Incoming writes are written to the receiving node's NVRAM, its HA partner's NVRAM, and its DR partner's NVRAMonly.
- C. Incoming writes are written to the all four nodes' NVRAM.
- D. Incoming writes are written to the receiving node's NVRAM and its DR partner's NVRAM only.
Answer: D
NEW QUESTION 97
After a recent unplanned power outage at the site, the power has been restored and you notice power supply fault messages in the event management system (EMS) log or fault lights on the storage shelves.
Which command would you use to collect information about the problem?
- A. sysconfig -a
- B. system node environment sensors show
- C. storage show fault -v
- D. storage show fault
Answer: C
NEW QUESTION 98
You want to set up a FabricPool between an ONTAP cluster and Google Cloud Storage.
In this scenario, which two components are required to accomplish this task? (Choose two.)
- A. an Express Route
- B. intercluster LIFs
- C. a Certificate Authority (CA) certificate
- D. a service account access key
Answer: B,C
NEW QUESTION 99
An A700 system to boot. The administrator finds the boot image gas bee competed.
In has scenario, which two actions would be performed to restore the image? (Choose two.)
- A. Copy the image from an external USB drive.
- B. Replace the boot device.
- C. Copy the image from a Web server using the netboot procedure
- D. Copy the image from the partner.
Answer: A,C
NEW QUESTION 100
How many drive bays does a DS4246 shelf have?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
Explanation:
Explanation/Reference: https://www.insight.com/en_US/shop/product/DS4246074812AQSR6/NETAPP/DS4246-0748-
12A-QS-R6/NetAppStorageShelfDS4246-Storageenclosure-24bays(SAS-2)-HDD4TBx12-rack-mountable-
4U/
NEW QUESTION 101
You replaced the controller of an HA pair in a 4-node cluster running clustered Data ONTAP 8.3.1. You have gone through all hardware testing requirements before booting the system.
Which action is now required to boot the system successfully?
- A. Use the boot_ontap command from the loader prompt.
- B. Use the storage disk reassign -s <source system id> -d <destination system id> command from the cluster shell.
- C. Use the storage disk reassign -s <source system id> -d <destination system id> command from diagnostics mode.
- D. Use the disk reassign -s <souroe systemid> -d <destination systemid> command from maintenance mode.
Answer: A
NEW QUESTION 102
A customer receives the message shown below in their EMS logs.
Tue Jun 27 18:34:18 CEST
[netapp-ct1: cp_worker: wafl.cp.toolong:error]: Aggregate AG1_NTAP_PROD experienced a long CP.
Tue Jun 27 18:37:10 CEST
Which two data sources do you use to explain this message? (Choose two.)
- A. ONTAP System Manager
- B. mgwd.log
- C. Performance Archive
- D. Active IQ Unified Manager
Answer: A,C
Explanation:
Explanation/Reference: https://kb.netapp.com/Advice_and_Troubleshooting/Data_Storage_Software/ONTAP_OS/ First_steps_troubleshooting_wafl_exempt10%3A_wafl.cp.toolong%3Aerror
NEW QUESTION 103
You want to update your storage system and are concerned about the compatibility of the SAN components and the host environment.
In this scenario, which two actions should you take to verify compatibility? (Choose two.)
- A. Upload AutoSupports to Active IQ.
- B. Use Active IQ Interop Advisor.
- C. Use the Active IQ Config Advisor.
- D. Use the Interoperability Matrix Tool.
Answer: C,D
NEW QUESTION 104
Referring to the exhibit.
Which two actions would you perform to address the system alternate-control-path (ACP) connectivity issue shown in the exhibit? (Choose two.)
- A. Reseat the shelf modules.
- B. Reseat the ACP cable.
- C. Turn options acp.enable off and then on.
- D. Perform a takeover and giveback.
Answer: C,D
NEW QUESTION 105
A user complains that they cannot access a new NFS mount while logged into their Linux client. They are unable to mount the file system and are receiving an access denied error. The NFS server is a clustered Data ONTAP 8.3.1 storage virtual machine (SVM).
Which two steps should be taken to troubleshoot the problem? (Choose two.)
- A. Execute the mount command on the client to determine how NFS mounts are mounted.
- B. Execute the vserver nfs show command on the clustered Data ONTAP cluster shell.
- C. Verify that the access settings of the export policy's rule are applicable to the export.
- D. Confirm that the NFS mount's underlying volume is set to the NTFS security style.
Answer: A,C
NEW QUESTION 106
You have an ONTAP 2-node cluster. You run a read/write test workload against an SMB share, and it is slower than you expected. You run the same test again, but this time you monitor the storage using a QoS command.
Referring to the exhibit, what is the problem?
- A. The SMB read sizes should be increased.
- B. The NVRAM needs to be replaced.
- C. There is a disk bottleneck.
- D. An HA interconnect problem is present.
Answer: D
NEW QUESTION 107
Which two OnCommand products would you use to manage your clustered Data ONTAP systems? (Choose two.)
- A. OnCommand System Manager
- B. OnCommand Host Package
- C. OnCommand Shift
- D. OnCommand Unified Manager
Answer: B,C
NEW QUESTION 108
Which three conditions would prevent a normal giveback operation? (Choose three.)
- A. established NFSv3 sessions
- B. LUNs mapped with ALUA enabled
- C. established CIFS sessions
- D. ongoing SnapMirror updates
- E. presence of failed disks
Answer: C,D,E
NEW QUESTION 109
You have an AFF platform and want to use object storage to provide a cloud-based capacity tier.
In this scenario, which NetApp technology would you use to accomplish this task?
- A. Flash Pool
- B. NetApp HCI
- C. FabricPool
- D. FlashCache
Answer: C
NEW QUESTION 110
......
Get Latest [Sep-2021] Conduct effective penetration tests using ExamcollectionPass NS0-194