156-585 Exam Brain Dumps - Study Notes and Theory [Nov-2021]
100% Guaranteed Results 156-585 Unlimited 116 Questions
CheckPoint 156-585 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NEW QUESTION 42
Some users from your organization have been reported some connection problems with CIFS since this morning. You suspect an IPS Issue after an automatic IPS update last night. So you want to perform a packet capture on uppercase I only directly after the IPS module (position 4 in the chain) to check if the packets pass the IPS. What command do you need to run?
- A. fw monitor -pl asm <filterexpression>
- B. tcpdump -eni any <filterexpression>
- C. fw monitor -ml -pl 5 -e <filterexpression>
- D. fw monitor -pi 5 -e <filterexpression>
Answer: C
NEW QUESTION 43
When debugging is enabled on firewall kernel module using the 'fw ctl debug' command with required options, many debug messages are provided by the kernel that help the administrator to identify issues. Which of the following is true about these debug messages generated by the kernel module?
- A. Messages are written to a buffer and collected using 'fw ctl kdebug'
- B. Messages are written to $FWDIR/log/fw.elg
- C. Messages are written to /etc/dmesg file
- D. Messages are written to console and also /var/log/messages file
Answer: D
NEW QUESTION 44
What are the four ways to insert an FW Monitor into the firewallkernel chain?
- A. Relative position using location, relativepositionusing alias, absolute position, all positions
- B. Absolute position using location, absolute position using alias, relative position, all positions
- C. Relative position using geolocation relative position using inertial navigation, absolute position all positions
- D. Absolute position using location, relative position using alias, general position, all positions
Answer: C
NEW QUESTION 45
When a User process or program suddenly crashes, a core dump is often used to examine the problem. Which command is used to enable the core-dumping via GAIA dish?
- A. set core-dump enable
- B. set user-dump enable
- C. set core-dump per_process
- D. set core-dump total
Answer: A
NEW QUESTION 46
How many captures does the command "fw monitor -p all" take?
- A. All 4 points of the fw VM modules
- B. The -p option takes the same number of captures, but gathers all of the data packet
- C. All 15 of the inbound and outbound modules
- D. 1 from every inbound and outbound module of the chain
Answer: C
NEW QUESTION 47
How many tiers of pattern matching can a packet pass through during IPS inspection?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 48
RAD is initiated when Application Control and URL Filtering blades are active on the Security Gateway What is the purpose of the following RAD configuration file SFWDIR/conf/rad_settings.C?
- A. This file contains the location information tor Application Control and/or URL Filtering entitlements
- B. This file contains all the host name settings for the online application detection engine
- C. This file contains RAD proxy settings
- D. This file contains the information on how the Security Gateway reaches the Security Managers RAD service for Application Control and URL Filtering
Answer: D
NEW QUESTION 49
Which of the following is a component of the Context Management Infrastructure used to collect signatures in user space from multiple sources, such as Application Control and IPS. and compiles them together into unified Pattern Matchers?
- A. cpas
- B. Context Loader
- C. CMI Loader
- D. PSL - Passive Signature Loader
Answer: C
NEW QUESTION 50
Your fwm constantly crashes and is restarted by the watchdog. You can't find any coredumps related to this process, so you need to check If coredumps are enabled at all How can you achieve that?
- A. in expert mode run show core-dump status
- B. in dish run set core-dump status
- C. in dish run show coredumb status
- D. in dish run show core-dump status
Answer: C
NEW QUESTION 51
What process monitors, terminates, and restarts critical Check Point processes as necessary?
- A. FWD
- B. CPWD
- C. FWM
- D. CPM
Answer: B
NEW QUESTION 52
You need to run a kernel debug over a longer period of time as the problem occurs only once or twice a week. Therefore, you need to add a timestamp to the kernel debug and write the output to a file but you can't afford to fill up all the remaining disk space and you only have 10 GB free for saving the debugs. What is the correct syntax for this?
- A. fw ctl kdebug -T -f -m 10 -s 1000000 > debugfilename
- B. fw ctl kdebug -T -f -m 10 -s 1000000 -o debugfilename
- C. fw ctl kdebug -T -m 10 -s 1000000 -o debugfilename
- D. fw ctl debug -T -f -m 10 -s 1000000 -o debugfilename
Answer: D
NEW QUESTION 53
Your users have some issues connecting Mobile Access VPN to the gateway. How can you debug the tunnel establishment?
- A. run fw ctl zdebug -m sslvpn all
- B. in the file $CVPNDIR/conf/httpd.conf change the line loglevel .. To LogLevel debug and run cvpnrestart
- C. in the file $VPNDIR/conf/httpd.conf the line Loglevel .. To LogLevel debug and run vpn restart
- D. run vpn debug truncon
Answer: B
NEW QUESTION 54
What is the kernel process for Content Awareness that collects the data from the contexts received from the CMI and decides if the file is matched by a data type?
- A. cntmgr
- B. cntawmod
- C. dlpu
- D. dlpda
Answer: B
NEW QUESTION 55
When running a debug with fw monitor, which parameter will create a more verbose output?
- A. -i
- B. -0
- C. -d
- D. -i
Answer: C
NEW QUESTION 56
The Check Pom! Firewall Kernel is the core component of the Gaia operating system and an integral part of the traffic inspection process There are two procedures available for debugging the firewall kernel Which procedure/command is used for troubleshooting packet drops and other kernel activites while using minimal resources (1 MB buffer)?
- A. fwk ctl debug
- B. fw ctl debug/kdebug
- C. fw debug ctl
- D. fw ctl zdebug
Answer: D
NEW QUESTION 57
Which Threat Prevention daemon is the core Threat Emulator, engine and responsible for emulation files and communications with Threat Cloud?
- A. ctasd
- B. scrub
- C. inmsd
- D. ted
Answer: D
Explanation:
https://supportcenter.checkpoint.com/supportcenter/portal?eventSubmit_doGoviewsolutiondetails=&solutionid=sk97638
NEW QUESTION 58
What are the maximum kernel debug buffer sizes, depending on the version
- A. 8GB or 64GB
- B. 8MB or 32MB
- C. 4MB or 8MB
- D. 32MB or 64MB
Answer: B
NEW QUESTION 59
Which one of the following is NOT considered a Solr core partition:
- A. CPM_0_Revisions
- B. CPM_Gtobal_R
- C. CPM_Global_A
- D. CPM_0_Disabled
Answer: D
NEW QUESTION 60
Which command can be run in Expert mode to verify the core dump settings?
- A. cat /etc/sysconfig/coredump/cdm.conf
- B. grep cdm /config/db/coredump
- C. grep $FWDIR/config/db/initial
- D. grep cdm /config/db/initial
Answer: C
NEW QUESTION 61
What command sets a specific interface as not accelerated?
- A. nonaccel -s <interface1>
- B. fwaccel -n <intetface1 >
- C. noaccel-s<interface1>
- D. fwaccel exempt state <interface1>
Answer: A
NEW QUESTION 62
......
156-585 Dumps PDF - Want To Pass 156-585 Fast: https://www.examcollectionpass.com/CheckPoint/156-585-practice-exam-dumps.html