Positive Aspects of Valid Dumps Essentials Exam Dumps! [Feb-2023]
First Attempt Guaranteed Success in Essentials Exam 2023
How to book the Essential Exam
These are following steps for registering the Essential exam.
- Step 1: Visit to WatchGaurd Exam Registration
- Step 2: Sign up/Login to WatchGaurd account
- Step 3: Select local centre based on your country, date, time and confirm with a payment method.
What is the duration, language, and format of Essential Exam
- Language: English
- Passing Score: 75%
- Length of Examination: 120 minutes
- Type of Questions: Single and Multiple Choice.
- Number of Questions: 70
NEW QUESTION 33
Which of these actions adds a host to the temporary or permanent blocked sites list? (Select three.)
- A. In Policy Manager, select Setup> Default Threat Protection > Blocked Sites and click Add.
- B. On the Firebox System Manager >Blocked Sites tab, select Add.
- C. Enable the AUTO-block sites that attempt to connect option in a deny policy.
- D. Add the site to the Blocked Sites Exceptions list.
Answer: A,B,C
NEW QUESTION 34
The IP address for the trusted interface on your Firebox is 10.0.40.1/24, but you want to change the IP address for this interface. How can you avoid a network outage for clients on the trusted network when you change the interface IP address to 10.0.50.1/24? (Select one.)
- A. Create a 1-to-1 NAT rule for traffic from the 10.0.40.0/24 subnet to addresses on the 10.0.50.0/24 subnet.
- B. Add 10.0.40.1/24 as a secondary IP address for the interface.
- C. Add a route to 10.0.40.0/24 with the gateway 10.0.50.1.
- D. Add IP addresses on the 10.0.40.0/24 subnet to the DHCP Server IP address pool for this interface.
Answer: B
NEW QUESTION 35
For which of these third party authentication methods must you specify a search base? (Select two.)
- A. SecurID
- B. RADIUS
- C. LDAP
- D. Active Directory
Answer: C,D
Explanation:
Explanation/Reference:
B: Configuring the Firebox to use Active Directory authentication is similar to the process for LDAP authentication. You must set a search base to put limits on the directories on the authentication server the Firebox searches in for an authentication match.
D: When you configure the Firebox to use LDAP authentication, you must set a search base to put limits on the directories on the authentication server the Firebox searches in for an authentication match Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, page 83-84
NEW QUESTION 36
Which policies can use the Intrusion Prevention Service to block network attacks? (Select one?)
- A. All policies
- B. Only inbound policies
- C. Only proxy policies
- D. Only packet filter policies
- E. Only HTTP and HTTPS Proxy policies
Answer: A
NEW QUESTION 37
From the Firebox System Manager >Authentication List tab, you can view all of the authenticated users connected to your Firebox and disconnect any of them.
- A. True
- B. False
Answer: A
NEW QUESTION 38
Clients on the trusted network need to connect to a server behind a router on the optional network. Based on this image, what static route must be added to the Firebox for traffic from clients on the trusted network to reach a server at 10.0.20.100? (Select one.)
- A. Route to 10.0.20.0/24, Gateway 10.0.2.254
- B. Route to 10.0.20.0/24, Gateway 10.0.2.1
- C. Route to 10.0.20.0, Gateway 10.0.2.254
- D. Route to 10.0.10.0/24, Gateway 10.0.10.1
Answer: A
Explanation:
Explanation/Reference:
We must add a trusted static route to the 10.0.20.0/24 network through the 10.0.2.254 gateway.
NEW QUESTION 39
In the default Firebox configuration file, which policies control management access to the device? (Select two.)
- A. WatchGuard Web UI
- B. WatchGuard
- C. FTP
- D. Ping
- E. Outgoing
Answer: A,B
NEW QUESTION 40
Which WatchGuard tools can you use to review the log messages generated by your Firebox? (Select three).
- A. Dimension > Log manager
- B. Firebox System Manager > Traffic Monitor
- C. Firebox System Manager > Status Report
- D. WatchGuard System Manager > Policy Manager
- E. Fireware XTM Web UI > Traffic Monitor
Answer: A,B,E
Explanation:
Explanation/Reference:
A: You can use Firebox System Manager (FSM) to see log messages from your XTM device as they occur.
1. Start Firebox System Manager.
2. Select the Traffic Monitor tab.
Reference: http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#cshid=en-US/fsm/ log_msgs_traffic_mon_wsm.html
D: You can use Firebox System Manager to see log messages in real-time on the Traffic Monitor tab. You can also examine log messages with Log Manager or WatchGuard Dimension.
B: After you connect to WatchGuard WebCenter, you can review the log messages sent from your XTM devices to your WatchGuard Log Server. Log Manager enables you to see log messages from your device for any period of time you specify, if log messages were generated in the selected time frame. To see log messages for an XTM device as they are generated, in real-time, you can use Firebox System Manager Traffic Monitor.
Reference: http://www.watchguard.com/help/docs/wsm/XTM_11/en-US/index.html#en-US/logging/ log_mgr_view_device_wsm.html
Incorrect:
Not C: The Status Report tab shows statistics about Firebox or XTM device traffic and performance. It does not display log messages.
To see the Status Report:
1. Start Firebox System Manager.
2. Select the Status Report tab.
NEW QUESTION 41
With the policies configured as shown in this image, HTTP traffic can be sent and received through branch office VPN tunnel.1 and tunnel.2.
- A. True
- B. False
Answer: B
NEW QUESTION 42
You need to create an HTTP-proxy policy to a specific domain for software updates (example.com). The update site has multiple subdomains and dynamic IP addresses on a content delivery network. Which of these options is the best way to define the destination in your HTTP-proxy policy? (Select one.)
- A. Configure an FQDN for *.example.com.
- B. Add IP addresses that correspond to each software update server in the domain.
- C. Configure a host name for update.example.com.
- D. Create an alias for all subdomains and known IP addresses for example.com.
Answer: B
NEW QUESTION 43
Match each type of NAT with the correct description:
Conserves IP addresses and hides the internal topology of your network. (Choose one)
- A. 1-to1 NAT
- B. NAT Loopback
- C. Dynamic NAT
Answer: B
Explanation:
Dynamic NAT is also known as IP masquerading.With dynamic NAT many computers can connect to the Internet from one public IP address. Dynamic NAT gives more security for internal hosts that use the Internet, because it hides the IP addresses of hosts on your network.
Reference:http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#en-US/nat/nat_dynamic_use_c.html%3FTocPath%3DNetwork%2520Address%2520Translation%252 0(NAT)%7CAbout%2520Dynamic%2520NAT%7C_____0
NEW QUESTION 44
What is the best method to downgrade the version of Fireware OS on your Firebox without losing all device configuration settings? (Select one.)
- A. Use the Upgrade OS feature in Fireware Web UI to install the sysa_dl file for an order version of Fireware OS.
- B. Restore a saved backup image that was created for the device before the last Fireware OS upgrade.
- C. Change the OS compatibility setting in Policy Manager to downgrade the device. Then use Policy Manager to save the configuration to the device.
- D. Use the downgrade feature on Policy Manager to select a previous of Fireware OS.
Answer: B
NEW QUESTION 45
If you disable the Outgoing policy, which policies must you add to allow trusted users to connect to commonly used websites? (Select three.)
- A. NAT policy
- B. HTTPS port 443
- C. FTP port 21
- D. DNS port 53
- E. HTTP port 80
Answer: B,D,E
Explanation:
TCP-UDP packet filter
If you decide to remove the Outgoing policy, you must add a policy for any type of traffic you want to allow through the Firebox. If you remove the Outgoing policy and then decide you want to allow all TCPand UDP connections through the Firebox again, you must add the TCP-UDP packet filter to provide the same function. This is because the Outgoing policy does not appear in the list of standard policies available from Policy Manager.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, page 97
NEW QUESTION 46
You have a privately addressed email server behind your Firebox. If you want to make sure that all traffic from this server to the Internet appears to come from the public IP address 203.0.113.25, regardless of policies, which from of NAT would you use? (Select one.)
- A. In the SMTP policy that handles traffic from the email server, select the option to apply dynamic NAT to all traffic in the policy and set the source IP address 203.0.113.25.
- B. Create a static NAT action for traffic to the email server, and set the source IP address to 203.0.113.25.
- C. Create a global dynamic NAT rule for traffic from the email server and set the source IP address to
203.0.113.25.
Answer: C
NEW QUESTION 47
HOTSPOT
Match each type of NAT with the correct description:
Answer:
Explanation:
Explanation:
NAT Loopback 1-to 1 NAT
Dynamic NAT
NEW QUESTION 48
Match each type of NAT with the correct description:
Changes and routes all incoming and outgoing packets sent from one range of addresses to a different range of addresses. (Choose one)
- A. Dynamic NAT
- B. NAT Loopback
- C. 1-to1 NAT
Answer: C
Explanation:
Explanation/Reference:
When you enable 1-to-1 NAT, the Firebox changes and routes all incoming and outgoing packets sent from one range of addresses to a different range of addresses.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, page 74
NEW QUESTION 49
Match the monitoring tool to the correct task.
Which tool can ping the source of a denied packet? (Select one)
- A. FireboxSystem Manager - Subscription services
- B. FireWatch
- C. Traffic Monitor
- D. FireBox System Manager - Blocked Sites list
- E. Log Server
- F. Firebox System Manager - Authentication list
Answer: C
Explanation:
For a quick look at the log messages generated by the Firebox, use Traffic Monitor. With Traffic Monitor, you can apply color to differenttypes of messages, and ping or traceroute to the IP addresses of computers included in the log messages.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION 50
How is a proxy policy different from a packet filter policy? (Select two.)
- A. Only a proxy policy can prevent specific threats without blocking the entire connection.
- B. Only a proxy works ta the application, network, and transport layers to examine all connection data.
- C. Only a proxy policy examines information in the IP header.
- D. Only a proxy policy uses the IP source, destination, and port to control network traffic.
Answer: B,D
NEW QUESTION 51
In the network configuration in this image, which aliases is Eth2 a member of? (Select three.)
- A. Any-Trusted
- B. Optional-1
- C. Any-optional
- D. Any-External
- E. Any
Answer: B,C,E
NEW QUESTION 52
In a Mobile VPN configuration, why would you choose default route VPN over split tunnel VPN? (Select one.)
- A. Default route VPN uses less bandwidth
- B. Default route VPN allows your Firebox to examine all remote user traffic
- C. Default route VPN uses less processing power
- D. Default route VPN automatically allows dynamic NAT
Answer: D
NEW QUESTION 53
If your Firebox has a single public IP address, and you want to forward inbound traffic to internal hosts based on the destination port, which type of NAT should you use? (Select one.)
- A. Static NAT
- B. Dynamic NAT
- C. 1-to-1 NAT
Answer: C
NEW QUESTION 54
Users on the trusted network cannot browse Internet websites.
Based on the configuration shown in this image, what could be the problem with this policy configuration? (Select one.)
- A. The HTTP-proxy policy has higher precedence than the HTTPS-proxy policy.
- B. The default Outgoing policy has been removed and there is no policy to allow DNS traffic.
- C. The HTTP-proxy allows Any-Trusted and Any-Optional to Any-External.
- D. The HTTP-proxy policy is configured for the wrong port.
Answer: D
NEW QUESTION 55
......
Practice LATEST Essentials Exam Updated 75 Questions: https://www.examcollectionpass.com/WatchGuard/Essentials-practice-exam-dumps.html