[Q26-Q50] Get Prepared for Your DES-1423 Exam With Actual EMC Study Guide!

Share

Get Prepared for Your DES-1423 Exam With Actual EMC Study Guide!

Pass Your Next DES-1423 Certification Exam Easily & Hassle Free


Conclusion

The proper perspective of the Dell DES-1423 exam comes from utilizing the right methods to acquire an awareness of all the subject matters provided. Attending official classes is among these methods. Again, those expecting to hold the high-ranking Dell certificate should be ready to undergo all it takes. So, sit for the test today and boost your career soon!


Testing Process Details

DES-1423 exam carries 60 questions. Applicants should answer all of them within 1.5 hours. The passing grade is 63%, while registration involves paying a fee of $230. To achieve the right level of competence concerning the test’s subject matter, follow the official courses in-depth and utilize books in covering what is outlined in the syllabus.

 

NEW QUESTION 26
What is the recommended networking design approach when planning subnets?

  • A. Use dedicated subnets for management, data, replication and backup.Assign the lowest priority gateway number for the data subnet.
  • B. Use a common subnet for management, data, replication and backup.Assign a random priority gateway number for the subnet.
  • C. Use a common subnet for data and management and a common subnet for replication and backup.Assign the lowest priority gateway number for the management subnet.
  • D. Use a common subnet for data, replication and backup, and use a dedicated subnet for management.Assign the lowest priority gateway number for the management subnet.

Answer: A

 

NEW QUESTION 27
What defines FEC link aggregation mode?

  • A. Balances outbound traffic across all active ports in the aggregated link.
  • B. Switches to the next interface when the primary interface becomes unavailable.
  • C. Balances outgoing traffic based on hashed protocol header information that includes source and destination addresses.
  • D. Balances outgoing traffic based on hashed protocol header information that includes source and destination addresses, and VLAN tag.

Answer: D

Explanation:
Explanation/Reference: http://doc.isilon.com/onefs/8.0.0/help/en-us/ifs_r_link_aggregation_methods.html

 

NEW QUESTION 28
An Isilon administrator is receiving "permission denied" while accessing a file on a cluster that an end-user created through an SMB share. The end-user is unable to access the share from their UNIX server.
The end-user "mydomain.com\win_user1" as the login name to access the Microsoft Windows share and then used an LDAP account name of "ux_user1" to access the UNIX mount. The Isilon cluster is joined to the
"mydomain.com" Active Directory domain. In additional, the cluster has an LDAP provider attached to it while the on-disk identity is set as "Native".
What is a possible cause for this permission issue?

  • A. On-disk identity is set as "Native".
  • B. RFC2307 is not configured on the Active Directory.
  • C. Fake UID generation in the cluster is disabled.
  • D. Usermapping rule is not present.

Answer: B

 

NEW QUESTION 29
A company plans to build two Isilon clusters in an active-active disaster recovery environment. The initial requirement is to have one access zone for their Finance department. Which recommended directory structure meets the requirement?

  • A. Cluster_A:/ifs/finance/ifs/financeCluster_B:/ifs/finance/ifs/finance
  • B. Cluster_A:/ifs/cluster_a/finance/ifs/cluster_b/financeCluster_B:/ifs/cluster_a/finance/ifs/cluster_b/finance
  • C. Cluster_A:/ifs/cluster_a/ifs/cluster_bCluster_B:/ifs/cluster_a/ifs/cluster_b
  • D. Cluster_A:/ifs/finance/cluster_a/ifs/finance/cluster_bCluster_B:/ifs/finance/cluster_a/ifs/finance/cluster_b

Answer: B

 

NEW QUESTION 30
An administrator uses a TreeDelete job to delete a large directory. After the job starts, users notice an issue with performance on the cluster. Which recommended action will resolve the performance issue with the job?

  • A. Modify the running job to use an OFF_HOURS policy that runs at low impact during business hours and medium impact after business hours.
  • B. Pause the running job and resume after business hours using a high impact policy so that it does not impact users.
  • C. Let the job continue to run at the current impact level and schedule future jobs for after business hours so they do not impact users.
  • D. Modify the running job to use a high impact policy to reduce the amount of time users are impacted. Schedule the job after business hours in the future.

Answer: D

 

NEW QUESTION 31
On which node does the SSIP initially reside?

  • A. Lowest logical node number
  • B. Lowest node ID
  • C. Highest logical node number
  • D. Highest node ID

Answer: A

 

NEW QUESTION 32
A company has an Isilon cluster that is joined to an Active Directory (AD) domain. Previously, the company replaced their primary NTP server and added new NTP settings to the Isilon cluster. Now the users are experiencing authentication failures.
What is a possible reason for this behavior?

  • A. Time between the NTP and the AD differentiates by more than 5 minutes.
  • B. AD is not configured to synchronize its time from the cluster.
  • C. Cluster and the AD are configured to use the same NTP server.
  • D. SMB time is not configured on the cluster to synchronize with the AD.

Answer: B

 

NEW QUESTION 33
A new Isilon administrator has created their first quota of 100 TB on a directory called "/ifs/Boston-zone/RnD".
Both the Engineering and QA teams have access to this directory. The directory sits on a 4-node H400 node pool.
Two weeks later, the administrator notices that the team's available disk space is decreasing faster than anticipated for the "/ifs/Boston-zone/RnD" directory.
What is the most likely cause for the decrease in disk space?

  • A. SmartPools global spillover is not enabled.
  • B. Quota was configured to include overhead.
  • C. SmartPools tiering is not enabled.
  • D. Quota was configured as an Advisory quota.

Answer: B

Explanation:
Explanation/Reference: https://www.dell.com/community/Isilon/Isilon-Quota-Expand/td-p/7055322

 

NEW QUESTION 34
What information is required to enable the LDAP service on an Isilon cluster?

  • A. Base distinguished name, cluster name, and port number
  • B. Base distinguished name, port number, and at least one LDAP server
  • C. Administrator account and password, and LDAP server name and IP address
  • D. Port number, cluster name, and an LDAP server IP address

Answer: B

 

NEW QUESTION 35
A Job Engine is running in low space mode and no jobs are in the running state. What is the OneFS8.2 behavior if the AutoBalance job is initiated?

  • A. Job is started.
  • B. Job is not started.
  • C. Job is put into the queue.
  • D. Job is failed.

Answer: B

 

NEW QUESTION 36
An NFS export is created on the Isilon cluster. No clients are listed in the export rules. What is the client behavior when accessing the export?

  • A. All clients on the network can access the export.
  • B. Clients that access the export are mapped as root.
  • C. No clients on the network can access the export.
  • D. Clients can access the export with read-only permissions.

Answer: A

Explanation:
260
Isilon Administration and Management participant guide

 

NEW QUESTION 37
Which command provides cluster statistics including protocol, disk input, and disk output?

  • A. isi statistics client
  • B. isi statistics system
  • C. isi statistics protocol
  • D. isi statistics drive

Answer: B

 

NEW QUESTION 38
If configuration auditing is enabled, where are the audit logs stored?

  • A. /ifs/.ifsvar/audit/config/log
  • B. /ifs/.ifsvar/audit/audit.log
  • C. /var/log/isi_papi_d_audit.log
  • D. /var/log/audit_config

Answer: D

Explanation:
Explanation/Reference: https://www.google.com/url?
sa=t&rct=j&q=&esrc=s&source=web&cd=6&ved=2ahUKEwi__ePklKHmAhURzIUKHYipCVgQFjAFegQIBBAC& url=https%3A%2F%2Fwww.dell.com%2Fcommunity%2Fs%2Fvjauj58549%2Fattachments%2Fvjauj58549%
2Fsolutions-ch%2F482%2F1%2Fh12428-wp-best-practice-guide-isilon-file-system- auditing.pdf&usg=AOvVaw1rEv1R15oV0vd17KjB7VAo (5)

 

NEW QUESTION 39
Refer to the Exhibit.

In an Isilon environment, match the connectivity type to the proper numerical port reference shown in the exhibit.

Answer:

Explanation:

 

NEW QUESTION 40
What is the maximum number of active Swift connections on a 5-node Isilon cluster?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B

Explanation:
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/products/ storage-5/docu65240.pdf (10)

 

NEW QUESTION 41
A user has recently left the company. After two weeks, the Isilon administrator receive a request to provide some files from the user's directory called \ifs\user\John_Doe\development. The administrator then discovers that the required files have been deleted, but a snapshot of the directory is available.
After restoring the files from the snapshot, which additional step is necessary to access the files?

  • A. Restored files need to be copied from the .restore directory to the user directory.
  • B. Permissions of the restored files need to be changed.
  • C. Restored files need to be copied from the .snapshot directory to the .restore directory.
  • D. Permissions of the user directory need to be changed.

Answer: B

Explanation:
Explanation/Reference: https://community.emc.com/community/products/isilon/blog/2016/04/25/restoring-from-snapshots

 

NEW QUESTION 42
In Isilon OneFS, what is a characteristic of CoW with snapshots?

  • A. Used for more substantial changes such as deletes.
  • B. Increases file fragmentation.
  • C. Used for small changes, inodes, and directories.
  • D. Avoids the double write penalty.

Answer: C

Explanation:
With copy on write, as the name suggests, a new write to HEAD results in the old blocks being copied out to the snapshot version first.
Although this incurs a double write penalty, it results in less fragmentation of the HEAD file, which is better for cache prefetch, etc.
Typically, CoW is most prevalent in OneFS and is primarily used for small changes, inodes and directories.

 

NEW QUESTION 43
A company wants to re-use HD400 nodes into a new cluster with OneFS 8.2.0. What is the minimum number of HD400 nodes required?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:
Explanation/Reference: https://www.commoncriteriaportal.org/files/epfiles/383-7-148%20ST%20v1.0.pdf (9)

 

NEW QUESTION 44
What is the minimum storage space needed on a datastore to hold InsightIQ?

  • A. 70 GB
  • B. 85 GB
  • C. 50 GB
  • D. 65 GB

Answer: A

 

NEW QUESTION 45
What is a benefit of the Isilon Data Lake solution?

  • A. Block-based storage for large databases
  • B. Scale-up approach for petabyte scale
  • C. Protects multiple shared repositories at the same level
  • D. Maintains simplicity at petabyte scale

Answer: D

Explanation:
Explanation/Reference: https://www.newera-technologies.com/wp-content/uploads/2019/04/isilon-scale-out-data-lake.pdf (9)

 

NEW QUESTION 46
Which HTTPS port number should be used to connect to any node in an Isilon cluster?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

Explanation:
Explanation
Explanation/Reference: https://www.dellemc.com/en-us/collaterals/unauth/technical-guides-support-information/2019/09/ docu95378.pdf

 

NEW QUESTION 47
Which data access pattern makes the prefetch caching algorithm to be highly aggressive?

  • A. Random
  • B. Concurrency
  • C. Streaming
  • D. Parallel

Answer: C

 

NEW QUESTION 48
You have been tasked with designing SyncIQ policies for a systems administrator that requires failover and failback testing. What information should be provided to the administrator?

  • A. Failback replication policies that specify includes or excludes are not supported with SyncIQ.
  • B. SyncIQ supports failback replication policies that specify directory includes or excludes.
  • C. Failback replication policies that specify includes or excludes cannot use historical snapshots.
  • D. Failback replication policies that specify includes or excludes cannot use data encryption.

Answer: A

 

NEW QUESTION 49
What are the considerations when a NANON configuration is used?

  • A. Increases bandwidth inside the cluster and GbE links.
  • B. Increase frontend I/O ports and aggregated cache.
  • C. Increases capacity and aggregated cache.
  • D. Increases frontend network ports and capacity.

Answer: D

 

NEW QUESTION 50
......


Those who pass the Dell DES-1423 exam qualify for the Specialist – Implementation Engineer, PowerScale Version 3.0 certification. It pays heed to the execution of scale-out solutions for storage associated with PowerScale. Passing the test means the professional is up to the tasks in installing, managing, and administering the solution within a live environment for a data center.

 

Ace DES-1423 Certification with 70 Actual Questions: https://www.examcollectionpass.com/EMC/DES-1423-practice-exam-dumps.html