Get 100% Real 250-587 Exam Questions, Accurate & Verified Answers As Seen in the Real Exam!
250-587 Premium Files Updated Jun-2026 Practice Valid Exam Dumps Question
NEW QUESTION # 17
Refer to the exhibit.
Symantec Data Loss Prevention's four phases of risk reduction model provides a blueprint for identifying and remediating key risk areas without disrupting legitimate business activity. According to this model, which activity should occur during the baseline phase?
- A. establish business metrics and begin sending reports to business unit stakeholders
- B. test policies to ensure that blocking actions minimize business process disruptions
- C. monitor incidents and tune the policy to reduce false positives
- D. define and build the incident response team
Answer: C
NEW QUESTION # 18
You need to create a traditional third-mirror breakoff snapshot in disk group "testdg" on a volume named "testvol". You've used the vxassist command to start the creation of the snapshot, synchronizing in the background. How do you determine whether the snapshot is ready?
- A. Use "vxprint -g testdg -ht testvol" to display the status of testvol, and check the STATE column of the vxprint output; if the snapshot plex is ready, its state will be "SNAPATT".
- B. Use "vxprint -g testdg -ht testvol" to display the status of testvol, and check the STATE column of the vxprint output; if the snapshot plex is ready, its state will be "SNAPDONE".
- C. Use "vxprint -g testdg -ht testvol" to display the status of testvol, and check the STATE column of the vxprint output; if the snapshot plex is ready, its state will be "ACTIVE".
- D. Use "vxprint -g testdg testvol" to display the status of testvol, and check the STATE column of the vxprint output; if the snapshot plex is ready, its state will be "SNAPATT".
Answer: B
NEW QUESTION # 19
ou have gathered file I/O performance data from an Oracle Enterprise database. The database is using one filesystem on a striped volume. You want to use the performance data to adjust the system configuration to ensure efficient use of system resources. Which specific activity should you should perform to adjust the system configuration?
- A. Raw disk I/O activity
- B. All I/O activity
- C. Volume I/O activity
- D. File I/O activity
Answer: D
NEW QUESTION # 20
While working under VxVM control, you get an error message "VxVM vxassist ERROR V-5-1-2935 No more space in disk group configuration." This message indicates that there is no more space in the disk group configuration database for VxVM object records. How should you resolve this error?
- A. Copy the contents of several volumes to another disk group and then delete the volumes from the current disk group.
- B. Copy the contents of the volumes to another disk group.
- C. Add an additional disk to perform the operation.
- D. Delete some files from the current disk for some free space.
Answer: A
NEW QUESTION # 21
While troubleshooting the Storage Foundation 5.0 environment in your organization, you discover that a disk group is disabled. You need to run the vxconfigrestore command to restore the disk group. In this situation, which switch will you use to perform a precommit analysis of the state of the disk group configuration?
- A. Use the -d switch
- B. Use the -c switch
- C. Use the -l switch
- D. Use the -p switch
Answer: D
NEW QUESTION # 22
You have installed and configured Veritas Volume Manager on a UNIX server. You want to install and configure Veritas Enterprise Administrator (VEA) server to manage the VEA agents that you will be installing on Windows and UNIX client computers. You want to ensure you are able to successfully install VEA server. What should you do?
- A. Install VEA on the server where Veritas Volume Manager is installed.
- B. Install VEA server on a remote server that needs to be administered.
- C. Install a Windows server and install Java Runtime 1.4 and then install VEA.
- D. Install VEA server on each Storage Foundation 5.0 server that needs to be administered.
Answer: A
NEW QUESTION # 23
How would you define virtual storage?
- A. Virtual storage is a method of accessing data attached to another host.
- B. Virtual storage is a method of increasing disk I/O bandwidth.
- C. Virtual storage is the practice of storing data on large storage arrays.
- D. Virtual storage is the practice of accessing storage systems by means of an opaque software facade.
Answer: D
NEW QUESTION # 24
A DLP administrator needs to configure an Automated Response rule that can execute while endusers are off the corporate network. Which response rule condition will enable the administrator to accomplish this task?
- A. Protocol or Endpoint Destination
- B. Endpoint Location
- C. Endpoint Device
- D. Sender/User Matches Pattern
Answer: B
NEW QUESTION # 25
You have installed site awareness licenses on all hosts in the remote mirror configuration. You want the volume to be automatically mirrored across sites when it is created and you specify the allsites=on attribute with the vxassist command. Which read policy do you need to set to accomplish this task?
- A. Prefer policy
- B. Round robin policy
- C. Siteread policy
- D. Select policy
Answer: C
NEW QUESTION # 26
You are attempting to install Storage Foundation 5.0 on a server that has SUSE Linux Enterprise Server 9.0 installed on it. When you initiate the installation, it fails. You must ensure that installing Storage Foundation 5.0 has minimum impact on the server. What should you do to install Storage Foundation 5.0 on the server?
- A. Upgrade the existing operating system with SP 3.
- B. Change the operating system to Red Hat Fedora 4.
- C. Upgrade the existing operating system to SUSE Linux Enterprise Server 10.0.
- D. Change the operating system to Solaris 9.
Answer: C
NEW QUESTION # 27
You are auditing a current storage environment that is not utilizing storage tiering. The information gained from the audit is to be used in a new storage tiering design that will have 4 tiers (Tiers 1-4). You need to determine the location for archive data which needs to be accessible but is not used heavily. Where should you store this data?
- A. Tier 1: High-end storage arrays with fast, reliable network connections.
- B. Tier 2: High-end arrays, but performance is not a priority.
- C. Tier 4: low-cost media, such as tape, with little consideration given to performance.
- D. Tier 3: Mid-range to low-end storage arrays with fast, reliable network connections.
Answer: D
NEW QUESTION # 28
Which is a limitation of using CDS disk layout under VxVM 4.0 or above?
- A. The CDS format cannot be used for boot disks.
- B. The CDS format cannot be used in conjunction with OS-level partitioning.
- C. The CDS format cannot contain a private region and a public region on a single partition.
- D. The CDS format cannot be used with hardware RAID controllers.
Answer: A
NEW QUESTION # 29
Ten test agents are being deployed that use an uninstall password required to uninstall the DLP Agent. The agents deploy and install correctly. Upon testing to remove the Agent, the uninstall password fails to work. The deployment team used 'Symantec' for the UninstallPasswordKey. Why does the uninstall fail when using the same password?
- A. the PGPsdk.dll file was missing when the key was created
- B. the UninstallPwdKeyGenerator must be used to create an UninstallPasswordKey
- C. uninstall passwords are restricted from containing the word 'Symantec'
- D. the uninstall agent password needs to match the uninstall password key
Answer: B
NEW QUESTION # 30
Which object is used as a building block for a plex?
- A. A subdisk
- B. A VxVM Disk
- C. A physical disk
- D. A Volume
Answer: A
NEW QUESTION # 31
A DLP administrator needs to modify a Network Discover scan that has started. How should the administrator ignore files larger than 20 MB for the remaining shares?
- A. stop the Vontu Monitor Controller Service, go to Manage > Discover Scanning > Discover Targets, set a new filter, restart the service
- B. create a new scan with updated file size filters and start the scan
- C. pause the scan, edit the scan target filters to ignore files greater than 20 MB, resume the scan
- D. modify the server settings for the Discover server running the scan, adjust the maxfilesize.level setting to greater than 20 MB, restart the Discover server
Answer: C
NEW QUESTION # 32
You need to create a new mirrored-striped volume. You type the following command: vxassist -g diskgroup -P storagepool make strpvol 2g \ layout=mirror-stripe ncols=8 mirror=controller options Which type of volume will be created?
- A. A new 2GB mirrored-stripe volume with 8 columns that will have mirrors on the same controller.
- B. A new 2GB mirrored-stripe volume with 8 columns that will have 2 mirrors on same controller.
- C. A new 2GB mirrored-stripe volume with 8 columns that will have all mirrors on separate controllers.
- D. A new 2GB mirrored-stripe volume with 8 columns that will have 2 mirrors on separate controllers.
Answer: C
NEW QUESTION # 33
What is the most efficient policy so that incidents are generated only when a specific user under investigation sends encrypted files?
- A. a policy that has two conditions
- B. a policy that has two exceptions
- C. a policy that has one condition
- D. a policy that has one exception
Answer: A
NEW QUESTION # 34
Which command will you run to get the full path name of the file, if you only have the inode number?
- A. vxfsstat
- B. vxquot
- C. vxlsino
- D. vxquota
Answer: C
NEW QUESTION # 35
Which file is required to decrypt the edpa_ext0.log using the Endpoint Agent logdump utility?
- A. is.ead
- B. ks.ead
- C. dcs.ead
- D. cg.ead
Answer: B
NEW QUESTION # 36
Which two protocols are available by default and recognized by Network Monitor based on their individual signatures? (Select two.)
- A. IM: AIM
- B. FTP
- C. SNMP
- D. HTTPS
- E. IM: Google Talk
Answer: A,B
NEW QUESTION # 37
You have large number of mirrored volumes, and the resynchronization process on mirrored volumes will take lot of time. You want to address enable Dirty Region Logging (DRL) and find out the cause why it takes a long time for resynchronization. You want to check the status of DRL logging to see if it is already enabled. How will you accomplish this task?
- A. Use the vxprint command with the -F%drllogging $DCOVOL option
- B. Use the vxprint command with the -F%dcologging $DCOVOL option
- C. Use the vxprint command with the -F%drllogging $$DCONAME option
- D. Use the vxprint command with the -F%drllogging $DRLVOL option
Answer: C
NEW QUESTION # 38
While accessing a node in the Dynamic Multipathing (DMP) database you get an error "VxVM vxdmp NOTICE V-5-0-111 disabled dmpnode dmpnode_device_number".
How will you resolve this error? (Each correct answer presents part of the solution. Select two.)
- A. Enable the appropriate controllers to allow at least one path under this DMP node.
- B. Replace the hardware because there may be a problem with host-bus adapter.
- C. If possible correct the hardware failures Then, recover the volume using the vxrecover command.
- D. Check the underlying hardware to recover the desired path.
Answer: A,D
NEW QUESTION # 39
Which endpoint database file should be used to tune and change debugging levels?
- A. ks.ead
- B. am.ead
- C. cg.ead
- D. ps.ead
Answer: C
NEW QUESTION # 40
You have a Storage Foundation 5.0 server with a number of mirrored volumes. You need to appropriately utilize the free space on the mirrored volumes. What should you do?
- A. Concatenate and stripe several underlying mirror volumes
- B. Concatenate several underlying mirror volumes
- C. Mirror several concatenated plexes
- D. Mirror several striped plexes
Answer: B
NEW QUESTION # 41
......
REAL 250-587 Exam Questions With 100% Refund Guarantee : https://www.examcollectionpass.com/Symantec/250-587-practice-exam-dumps.html
Practice with 250-587 Dumps for Symantec Certified Specialist Certified Exam Questions & Answer: https://drive.google.com/open?id=1Te24xmy4fJdUbcNppoO8POm8XJTNQZl2