Latest Mar 15, 2026 Real 300-410 Exam Dumps Questions Valid 300-410 Dumps PDF
Cisco 300-410 Exam Dumps - PDF Questions and Testing Engine
Cisco 300-410 certification exam, also known as Implementing Cisco Enterprise Advanced Routing and Services, is designed for network engineers who want to validate their skills in implementing and troubleshooting advanced routing technologies and services. 300-410 exam is one of the six exams required to achieve the Cisco Certified Specialist - Enterprise Advanced Infrastructure Implementation certification. It covers a wide range of topics, including Layer 3 technologies such as OSPF, BGP, and EIGRP, VPN technologies such as DMVPN and FlexVPN, and network services such as QoS, NAT, and DHCP.
The Cisco ENARSI 300-410 exam is intended for candidates of the CCNP Enterprise certification that paves pathways for those dreaming of careers in computer networking. It is the best option for those who want to specialize in the area of implementing Cisco Enterprise advanced routing and services.
NEW QUESTION # 135
Refer to the exhibit.
A prefix list is created to filter routes inbound to an EIGRP process except for network 10 prefixes After the prefix list is applied no network 10 prefixes are visible in the routing table from EIGRP. Which configuration resolves the issue?
- A. ip prefix-list EIGRP seq 5 permit 10.0.0.0/8 ge 9 no ip prefix-list EIGRP seq 20 permit 10.0.0.0/8
- B. ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9.
- C. ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32
- D. ip prefix-list EIGRP seq 20 permit 10.0.0.0/8 ge 9 ip prefix-list EIGRP seq 10 permit 0.0.0.0/0 le 32
Answer: A
NEW QUESTION # 136
Refer to the exhibit.
An administrator noticed that after a change was made on R1, the timestamps on the system logs did not match the clock. What is the reason for this error?
- A. The system clock is set incorrectly to summer-time hours.
- B. The NTP server is in a different time zone.
- C. The keyword localtime is not defined on the timestamp service command.
- D. An authentication error with the NTP server results in an incorrect timestamp.
Answer: C
NEW QUESTION # 137
Refer to the exhibit.
The network administrator configured VRF lite for customer A. The technician at the remote site misconfigured VRF on the router. Which configuration will resolve connectivity for both sites of customer a?
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: D
Explanation:
Explanation
From the exhibit, we learned:
+ VRF customer_a was exported with Route target (RT) of 1:1 so at the remote site it must be imported with the same RT 1:1.
+ VRF customer_a was imported with Route target (RT) of 1:1 so at the remote site it must be exported with the same RT 1:1.
Therefore at the remote site we must configure the command "route-target both 1:1" (which is equivalent to two commands "route-target import 1:1" & "route-target export 1:1".
NEW QUESTION # 138
Refer to the exhibit.
Troubleshoot and ensure that branch B only ever uses the MPLS B network to reach HQ. Which action achieves this requirement?
- A. Introduce AS path prepending on the branch A MPLS B network connection so that any HQ advertisements from branch A toward the MPLS B network are prepended three times
- B. Modify the weight of all HQ prefixes received at branch B from the MPLS B network to be higher than the weights used on the MPLS A network
- C. Introduce an AS path filter on branch A routers so that only local prefixes are advertised into BGP
- D. increase the local preference for all HQ prefixes received at branch B from the MPLS B network to be higher than the local preferences used on the MPLS A network
Answer: C
Explanation:
If we modify the weight, increase local preference or use AS path prepending then we can only make MPLS B prefer over MPLS A.
But when MPLS B is down then MPLS A will be used which does not meet the requirement of this question. Only with AS path filtering we can deny prefixes from certain AS and make sure branch B never uses MPLS A to reach HQ.
NEW QUESTION # 139 
Refer to the exhibit. The traffic from spoke to hub is dropping. The operations team observes:
* R2-R3 link is down due to the fiber cut.
* R2 and R5 receive traffic from R1 in AS 65101.
* R3 and R5 receive traffic from R4 in AS 65201.
Which configuration resolves the issue?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 140
Refer to the exhibit.
R1 has a route map configured, which results in a loss of partial IPv6 prefixes for the BGP neighbor, resulting in service degradation. How can the full service be restored?
- A. The prefix lit requires all prefixes that R1 is advertising to be added to it, and this will allow additional prefixes to be advertised.
- B. The route map requires a deny 20 statement without set conditions, and this will allow additional prefixes to be advertised.
- C. The route map requires a permit 20 statement without set conditions, and this will allow additional prefixes to be advertised.
- D. The neighbor requires a soft reconfiguration, and this will clear the policy without resetting the BGP TCP connection.
Answer: C
NEW QUESTION # 141
Refer to the exhibit.
Refer to the exhibit. Which configuration resolves the route filtering issue on R1 to redistribute all the routes except 172.16.2.48/28?
- A.
- B.
- C.
- D.
Answer: A
NEW QUESTION # 142
Refer to the exhibit.
Which action restores OSPF adjacency between R1 and R2?
- A. Change the IP MTU of R1 Fa1/0 to 1300
- B. Change the IP MTU of R2 Fa0/0 to 1300
- C. Change the IP MTU of R2 Fa0/0 to 1500
- D. Change the IP MTU of R1 Fa1/0 to 1500
Answer: C
NEW QUESTION # 143
Which feature drops packets if the source address is not found in the snooping table?
- A. IPv6 Source Guard
- B. Binding Table Recovery
- C. IPv6 Prefix Guard
- D. IPv6 Destination Guard
Answer: A
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipv6_fhsec/configuration/xe-3s/ip6f-xe-3s-book/ip6-snooping
NEW QUESTION # 144
Refer to the exhibit.
A router receiving BGP routing updates from multiple neighbors for routers in AS 690. What is the reason that the router still sends traffic that is destined to AS 690 to a neighbor other than 10.222.1.1?
- A. The local preference value in another neighbor statement is higher than 250.
- B. The route map is applied in the wrong direction.
- C. The local preference value should be set to the same value as the weight in the route map.
- D. The weight value in another neighbor statement is higher than 200.
Answer: B
NEW QUESTION # 145
Refer to the exhibit.
What does the imp-null tag represent in the MPLS VPN cloud?
- A. Pop the label
- B. Include the EXP bit
- C. Exclude the EXP bit
- D. Impose the label
Answer: A
Explanation:
Explanation
The imp-null (implicit null) tag instructs the upstream router to pop the tag entry off the tag stack before forwarding the packet.
Note: pop means remove the top MPLS label
NEW QUESTION # 146
Refer to the exhibit.
What does the imp-null tag represent in the MPLS VPN cloud?
- A. Pop the label
- B. Include the EXP bit
- C. Exclude the EXP bit
- D. Impose the label
Answer: B
NEW QUESTION # 147
Refer to the exhibit.
A network is under a cyberattack. A network engineer connected to R1 by SSH and enabled the terminal monitor via SSH session to find the source and destination of the attack. The session was flooded with messagesi which made it impossible for the engineer to troubleshoot the issue. Which command resolves this issue on R1?
- A. (config)#no terminal monitor
- B. #terminal no monitor
- C. no terminal monitor
- D. (config)#terminai no monitor
Answer: B
NEW QUESTION # 148
Refer to the exhibit.
Which action restores OSPF adjacency between R1 and R2?
- A. Change the IP MTU of R1 Fa1/0 to 1300
- B. Change the IP MTU of R2 Fa0/0 to 1300
- C. Change the IP MTU of R2 Fa0/0 to 1500
- D. Change the IP MTU of R1 Fa1/0 to 1500
Answer: C
NEW QUESTION # 149
Refer to the exhibit.
A company is evaluating multiple network management system tools. Trending graphs generated by SNMP data are returned by the NMS and appear to have multiple gaps. While troubleshooting the issue, an engineer noticed the relevant output. What solves the gaps in the graphs?
- A. Configure the CIR rate to a lower value that accommodates all the NMS tools
- B. Separate the NMS class map in multiple class maps based on the specific protocols with appropriate CoPP actions
- C. Remove the exceed-rate command in the class map.
- D. Remove the class map NMS from being part of control plane policing.
Answer: B
NEW QUESTION # 150
LAB SIMULATION 2
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
* Refer to the Tasks tab to view the tasks for this lab item.
* Refer to the Topology tab to access the device console(s) and perform the tasks.
* Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
* All necessary preconfigurations have been applied.
* Do not change the enable password or hostname for any device.
* Do not replace existing routing policies or configurations.
* Save your configurations to NVRAM before moving to the next item.
* Click Next at the bottom of the screen to submit this lab and move to the next question.
* When Next is clicked, the lab closes and cannot be reopened.
Topology
Tasks
A network is configured with CoPP to protect the CORE router route processor for stability and DDoS protection. As a company policy, a class named class-default is preconfigured and must not be modified or deleted. Troubleshoot CoPP to resolve the issues introduced during the maintenance window to ensure that:
1. Dynamic routing policies are under CoPP-CRITICAL and are allowed only from the 10.10.x.x range.
2. Telnet, SSH, and ping are under CoPP-IMPORTANT and are allowed strictly to/from 10.10.x.x to the CORE router (Hint: you can verify using Loopback1).
3. All devices ping (UDP) any CORE router interface successfully to/from the 10.10.x.x range and do not allow any other IP address.
4. All devices run a successful traceroute (UDP) to any interface on the CORE router to/from the
10.10.x.x range, are under CoPP-NORMAL, and do not allow any other IP address traceroute is to be under CoPP-NORMAL (Hint: Traceroute port range 33434 33464).
Answer:
Explanation:
NEW QUESTION # 151
......
Reliable CCNP Enterprise 300-410 Dumps PDF Mar 15, 2026 Recently Updated Questions: https://www.examcollectionpass.com/Cisco/300-410-practice-exam-dumps.html
Latest 300-410 Exam Dumps for Pass Guaranteed: https://drive.google.com/open?id=1Ljm1MPGjr-_USDUpuqMR_fDq9zEoMBuF