[Jan 19, 2022] Free EMC DCS-TA DES-1D12 Exam Question
DES-1D12 dumps & EMC DCS-TA sure practice dumps
Basic Certification Requirements
Being a specialist designation, the Specialist - Technology Architect, Midrange Storage Solutions asks for some notable prior understanding. Thus, the certification vendor allows only those who have earned any of the Associate - Information Storage and Management certifications from version 2.0 to 4.0 to move ahead and aim at the DES-1D12 exam. These validations are suggested for candidates to become equipped with foundational subject matter understanding and increase the odds of success. Once a Dell DES-1D12 aspirant has earned any of these associate-level designations, the elementary understanding can be imbued, and hence, it will be easy to grasp what a higher-level exam like DES-1D12 is trying to convey.
NEW QUESTION 14
A Dell EMC PowerStore customer wants to schedule snapshots daily at 6 AM. Which snapshot frequency interval (in minutes) is available?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
Explanation:
Explanation/Reference: https://www.delltechnologies.com/en-us/collaterals/unauth/white-papers/products/storage/ h18156-dell-emc-powerstore-snapshots-thin-clones.pdf (27)
NEW QUESTION 15
What component or feature is provided by both the Dell EMC PowerStore 1000T array and the Dell EMC Unity XT 380 Series array?
- A. Unified System
- B. Container Integration
- C. Configured Block with Hypervisor
- D. NVMe disks
Answer: D
NEW QUESTION 16
You plan to schedule a Live Optics sampling with your customer to size a Dell EMC SC Series array. However, the customer wants to postpone the run until the end of the quarter because there could be more activity on the current storage system. What course of action is recommended?
- A. Take a week-long sampling on any given week because that is sufficient in most instances
- B. Take a single-day sampling on any given day because that is sufficient in most instances
- C. Wait until the end of the quarter and collect a single-day sampling
- D. Wait until the end of the quarter and collect a week-long sampling
Answer: B
NEW QUESTION 17
How many PCI-E lanes are provided for Slot 0 and Slot 1 in Dell EMC Unity XT arrays?
- A. 16 for Slot 0; 16 for Slot 1
- B. 8 for Slot 0; 16 for Slot 1
- C. 8 for Slot 0; 8 for Slot 1
- D. 16 for Slot 0; 8 for Slot 1
Answer: D
Explanation:
Reference:
https://www.delltechnologies.com/en-gb/collaterals/unauth/technical-guides-support-information/ products/storage/docu94617.pdf
NEW QUESTION 18
What are characteristics of D@RE on a Dell EMC Unity array?
- A. Impacts array only during implementation Has minimal impact on performance
- B. Does not impact array during implementation Has minimal impact on performance
- C. Impacts array for a moment after implementation
Has no impact on performance - D. Does not impact array during implementation Has some impact on performance for a moment
Answer: B
NEW QUESTION 19
How are vVol datastores mounted in Dell EMC PowerStore storage during the creation of vVol datastores in the vSphere environment shared by ESXi hosts?
- A. Volume Groups
- B. VMFS datastores
- C. Storage containers
- D. Storage Groups
Answer: C
Explanation:
A storage container is used to present vVol storage from a PowerStore cluster to vSphere. vSphere mounts the storage container as a vVol datastore and makes it available for VM storage. When a PowerStore cluster is used to provide VM storage, user VMs should be provisioned on the vVol datastores. The default storage container is mounted automatically on the nodes of the cluster.
NEW QUESTION 20
A customer site has four NAS servers participating in MetroSync replication. Which Dell EMC Unity feature could reduce failover times?
- A. SRDF Metro
- B. Cabinet Failover
- C. Consistency Groups
- D. QoS Failover Policy
Answer: B
NEW QUESTION 21
What is the minimum recommended amount of Flash capacity in a Dell EMC Unity 880 Hybrid pool?
- A. 8%
- B. 5%
- C. 15%
- D. 10%
Answer: B
NEW QUESTION 22
Match each Dell EMC Unity feature with its destination.
Answer:
Explanation:
Reference:
https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/storage/h15572- dell_emc_unity-nas_capabilities.pdf
NEW QUESTION 23
Recent legislation requires a government customer to enhance data security by utilizing D@RE with SED drivers and use Level 3 certified security. Which KMS product should be recommended for use with Dell EMC SC Series arrays?
- A. StorSecure StorMagic
- B. Gemalto SafeNet K460
- C. Dell EMC CloudLink
- D. Thales Vormetric VTE
Answer: B
Explanation:
Reference:
https://downloads.dell.com/manuals/all-products/esuprt_solutions_int/ esuprt_solutions_int_solutions_resources/s-solution-resources_white-papers108_en-us.pdf (9)
NEW QUESTION 24
What storage resources are affected with a refresh option on a Dell EMC PowerStore array?
- A. Thin clones and volumes only
- B. Thin clones, volumes, and replicas
- C. Thin clones and snapshots only
- D. Snapshots, thin clones, and volumes
Answer: B
NEW QUESTION 25
What is a key feature of the Dell EMC Future-Proof Storage Loyalty Program for Dell EMC SC Series arrays?
- A. 4:1 Efficiency Guarantee
- B. 4:1 Performance Guarantee
- C. 4:1 Reduction Guarantee
- D. 4 Year Satisfaction Guarantee
Answer: A
Explanation:
Explanation/Reference: https://www.dell.com/pk/business/p/storage-sc-all-flash/pd
NEW QUESTION 26
Which Dell EMC SC Series array allows for back-end expansion cards?
- A. SCv3000
- B. SC5020
- C. SC7020
- D. SCv3020
Answer: A
Explanation:
Reference:
https://i.dell.com/sites/doccontent/business/solutions/brochures/en/Documents/ scv3000_series_spec_sheet_dellemc.pdf
NEW QUESTION 27
How many PCI-E lanes are provided for Slot 0 and Slot 1 in Dell EMC Unity XT arrays?
- A. 16 for Slot 0; 16 for Slot 1
- B. 8 for Slot 0; 16 for Slot 1
- C. 8 for Slot 0; 8 for Slot 1
- D. 16 for Slot 0; 8 for Slot 1
Answer: D
NEW QUESTION 28
You are designing a Dell EMC PowerStore solution with a customer. They ask if they can populate Slots 0 to 10 with NVMe SSD drives.
What should be your response?
- A. Any drive type can be populated in the remaining slots
- B. NVMe SCM drives must be populated in the remaining empty slots
- C. NVMe SCM drives are required in Slots 0 through 10
- D. NVMe SSDs must be populated in the remaining empty slots
Answer: D
NEW QUESTION 29
You are designing a two-tiered Dell EMC SC Series solution that will be optimized for performance. You gather the necessary data from Live Optics and find that the read/write ratio is 80:20.
What approach is recommended?
- A. Size Tier 1 for 100% of the adjusted IOPS
- B. Use distributed adjusted IOPS for all tiers
- C. Size Tier 2 for 100% of the adjusted IOPS
- D. Use distributed adjusted IOPS for Tiers 1 and 2 only
Answer: B
NEW QUESTION 30
What is the minimum recommended amount of Flash capacity in a Dell EMC Unity 880 Hybrid pool?
- A. 8%
- B. 5%
- C. 15%
- D. 10%
Answer: B
Explanation:
Reference:
https://www.delltechnologies.com/en-us/collaterals/unauth/white-papers/products/storage/h15093- dell-emc-unity-best-practices-guide.pdf (16)
NEW QUESTION 31
......
EMC DES-1D12 Actual Questions and Braindumps: https://www.examcollectionpass.com/EMC/DES-1D12-practice-exam-dumps.html