Free Oct-2023 AZ-220 Dumps are Available for Instant Access
View All AZ-220 Actual Exam Questions Answers and Explanations for Free
NEW QUESTION # 82
You have an Azure subscription that contains an Azure IoT hub and two Azure IoT Edge devices named Device1 and Device2.
You need to ensure that the IoT hub only accepts connections from Device1 and Device2.
What should you configure?
- A. a private endpoint connection
- B. Azure API Management
- C. Azure Active Directory (Azure AD) Identity Protection
- D. a gateway device
Answer: A
Explanation:
Explanation
Ingress connectivity to IoT Hub using Azure Private Link.
A private endpoint is a private IP address allocated inside a customer-owned VNet via which an Azure resource is reachable. Through Azure Private Link, you can set up a private endpoint for your IoT hub to allow services inside your VNet to reach IoT Hub without requiring traffic to be sent to IoT Hub's public endpoint.
Similarly, your on-premises devices can use Virtual Private Network (VPN) or ExpressRoute peering to gain connectivity to your VNet and your IoT Hub (via its private endpoint). As a result, you can restrict or completely block off connectivity to your IoT hub's public endpoints by using IoT Hub IP filter or the public network access toggle. This approach keeps connectivity to your Hub using the private endpoint for devices.
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/virtual-network-support
NEW QUESTION # 83
You have an Azure IoT solution that includes an Azure IoT hub and 100 Azure IoT Edge devices.
You plan to deploy the IoT Edge devices to external networks. The firewalls of the external networks only allow traffic on port 80 and port 443.
You need to ensure that the devices can connect to the IoT hub. The solution must minimize costs.
What should you do?
- A. Configure the upstream protocol of the devices to use AMQP over WebSocket.
- B. Connect the external networks to the loT solution by using ExpressRoute.
- C. Configure the upstream protocol of the devices to use MQTT over TCP.
- D. Integrate cellular communication hardware onto the devices and avoid the use of the external networks.
Answer: A
Explanation:
Explanation
AMQP over WebSockets uses port 443.
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-devguide-protocols
NEW QUESTION # 84
You need to install the Azure IoT Edge runtime on a new device that runs Windows 10 IoT Enterprise.
In which order should you perform the actions? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
Step 1: From Azure IoT hub, create an IoT Edge device
In the Azure Cloud Shell, enter the following command to create a device named myEdgeDevice in your hub.
az iot hub device-identity create --device-id myEdgeDevice --edge-enabled --hub-name {hub_name} View the connection string for your device, which links your physical device with its identity in IoT Hub. Copy the value of the connectionString key from the JSON output and save it. This value is the device connection string. You'll use this connection string to configure the IoT Edge runtime in the step 3.
Step 2: From an elevated PowerShell prompt, run the Deploy-IoTEdge cmdlet.
Install the Azure IoT Edge runtime on your IoT Edge device.
Run PowerShell as an administrator.
Run the Deploy-IoTEdge command, which performs the following tasks:
- Checks that your Windows machine is on a supported version.
- Turns on the containers feature.
- Downloads the moby engine and the IoT Edge runtime.
Step 3: From an elevated PowerShell prompt, run the Initialize-IoTEdge cmdlet Step 4: Enter the IoT Edge device connection string.
Configure the IoT Edge device with a device connection string.
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/quickstart
NEW QUESTION # 85
You have an Azure IoT Edge automatic deployment named D1 that deploys a temperature module to five IoT Edge devices.
D1 has a deployment priority of 10 and the following module configuration.
You need to create a new layered deployment that will add a new twin property named ReportingMode. The new deployment must not overwrite the existing module configurations set by D1.
How should you configure the deployment? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation
Text Description automatically generated with low confidence
Box 1: 1
A priority defines whether a deployment should be applied to a targeted device relative to other deployments.
A deployment priority is a positive integer, with larger numbers denoting higher priority. If an IoT Edge device is targeted by more than one deployment, the deployment with the highest priority applies.
Deployments with lower priorities are not applied, nor are they merged. If a device is targeted with two or more deployments with equal priority, the most recently created deployment (determined by the creation timestamp) applies.
Box 2: "properties.tags": {
You create a deployment manifest and then define which devices it applies to based on tags in the device twin.
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/module-deployment-monitoring
NEW QUESTION # 86
You have an Azure IoT hub that receives messages from an IoT device. The messages are serialized as Protobuf.
You need the IoT hub to route the messages.
What should you do first?
- A. Configure the loT device to add ASCII-encoded properties to the body of the messages.
- B. From the Azure portal, configure the loT hub to add message enrichments.
- C. Configure the loT device to add application properties to the messages.
- D. From the Azure portal, add desired properties to the device twin.
Answer: D
Explanation:
Explanation
Device twins store device-related information that:
Device and back ends can use to synchronize device conditions and configuration.
The solution back end can use to query and target long-running operations.
Desired properties. Used along with reported properties to synchronize device configuration or conditions. The solution back end can set desired properties, and the device app can read them. The device app can also receive notifications of changes in the desired properties.
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-devguide-device-twins
NEW QUESTION # 87
You are deploying an Azure IoT Edge solution that includes multiple IoT Edge devices.
You need to configure module-to-module routing.
To which section of the deployment manifest should you add the routes?
- A. modules
- B. systemModules
- C. $edgeHub
- D. storeAndForwardConfiguration
Answer: C
Explanation:
Routes are declared in the $edgeHub desired properties.
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/module-composition
NEW QUESTION # 88
You have an Azure IoT Edge device named Edge1.
You need to configure the module container to link the module storage to the host storage.
How should you configure the deployment manifest? To answer, drag the appropriate keys to the correct targets. Each key may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-use-create-options
NEW QUESTION # 89
You have an Azure loT hub and an Azure virtual network.
You configure a private endpoint for the IoT hub.
You need to ensure that the loT hub can send data to downstream services What should you create first?
- A. a consumer group
- B. a managed identity
- C. a message route
- D. an IP filter rule
Answer: D
NEW QUESTION # 90
You have an instance of Azure Time Series Insights and an Azure IoT hub that receives streaming telemetry from IoT devices.
You need to configure Time Series Insights to receive telemetry from the devices.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
Step 1: Create a dedicated consumer group..
Add a consumer group to your IoT hub.
Applications use consumer groups to pull data from Azure IoT Hub. To reliably read data from your IoT hub, provide a dedicated consumer group that's used only by this Time Series Insights environment.
Step 2: Add a new Time Series Insights event source.
Add a new event source
Sign in to the Azure portal.
In the left menu, select All resources. Select your Time Series Insights environment.
Under Settings, select Event Sources, and then select Add.
In the New event source pane, for Event source name, enter a name that's unique to this Time Series Insights environment. For example, enter event-stream.
Step 3: Configure the Time Series event source to connect to an existing IOT hub Step 4: For Source, select IoT Hub.
Step 5: Select a value for Import option:
If you already have an IoT hub in one of your subscriptions, select Use IoT Hub from available subscriptions. This option is the easiest approach.
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-how-to-add-an-event-source-iothub
NEW QUESTION # 91
You are writing code to provision IoT devices by using the Device Provisioning Service.
Which two details from the Overview blade of the Device Provisioning Service are required to provision a new IoT client device? To answer, select the appropriate detail in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/tutorial-set-up-device
NEW QUESTION # 92
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are developing a custom Azure IoT Edge module.
The module needs to identify the device ID of the local device.
Solution: You configure the module to read the device ID of the device twin.
Does this meet the goal?
- A. Yes
- B. No
Answer: A
Explanation:
Device twins are JSON documents that store device state information including metadata, configurations, and conditions. Azure IoT Hub maintains a device twin for each device that you connect to IoT Hub.
Device identity properties. The root of the device twin JSON document contains the read-only properties from the corresponding device identity stored in the identity registry.
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-devguide-device-twins
NEW QUESTION # 93
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have an Azure Stream Analytics job that receives input from an Azure IoT hub and sends the outputs to Azure Blob storage. The job has compatibility level 1.1 and six streaming units.
You have the following query for the job.
You plan to increase the streaming unit count to 12.
You need to optimize the job to take advantage of the additional streaming units and increase the throughput.
Solution: You change the query to the following.
Does this meet the goal?
- A. Yes
- B. No
Answer: B
Explanation:
Max number of Streaming Units with one step and with no partitions is 6.
Reference:
https://docs.microsoft.com/en-us/azure/stream-analytics/stream-analytics-parallelization
NEW QUESTION # 94
You have an Azure IoT solution that includes an Azure IoT Hub named Hub1 and an Azure IoT Edge device named Edge1. Edge1 connects to Hub1.
You need to deploy a temperature module to Edge1. What should you do?
- A. From the Azure portal, navigate to Hub1 and select IoT Edge. Select Edge1, and then select Manage Child Devices. From a Bash prompt, run the following command:
az iot edge set-modules -device-id Edge1 -hub-name Hub1 -content C:
\deploymentMan1.json - B. Create an IoT Edge deployment manifest that specifies the temperature module and the route to
$upstream. From a Bush prompt, run the following command:
az iot hub monitor-events-device-id Edge1 -hub-name Hub1 - C. From the Azure portal, navigate to Hub1 and select IoT Edge. Select Edge1, select Device Twin, and then set the deployment manifest as a desired property. From a Bash prompt, run the following command az iot hub monitor-events-device-id Edge1 -hub-name Hub1
- D. Create an IoT Edge deployment manifest that specifies the temperature module and the route to $upstream.
From a Bush prompt, run the following command:
az iot edge set-modules -device-id Edge1 -hub-name Hub1 -content C:\deploymentMan1.json
Answer: D
Explanation:
You deploy modules to your device by applying the deployment manifest that you configured with the module information.
Change directories into the folder where your deployment manifest is saved. If you used one of the VS Code IoT Edge templates, use the deployment.json file in the config folder of your solution directory and not the deployment.template.json file.
Use the following command to apply the configuration to an IoT Edge device:
az iot edge set-modules --device-id [device id] --hub-name [hub name] --content [file path]
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/how-to-deploy-modules-cli
NEW QUESTION # 95
DRAG DROP
You need to install the Azure IoT Edge runtime on a new device that runs Windows 10 IoT Enterprise.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Answer:
Explanation:
Explanation:
Step 1: From Azure IoT Hub, create an IoT Edge Device
Step 2: Deploy-IoTEdge
The Deploy-IoTEdge command checks that your Windows machine is on a supported version, turns on the containers feature, and then downloads the moby runtime and the IoT Edge runtime. The command defaults to using Windows containers.
{Invoke-WebRequest -useb https://aka.ms/iotedge-win} | Invoke-Expression; ` Deploy-IoTEdge Step 3: Initialize-IoTEdge The Initialize-IoTEdge command configures the IoT Edge runtime on your machine. The command defaults to manual provisioning with Windows containers.
{Invoke-WebRequest -useb https://aka.ms/iotedge
Step 4: Enter the IoT Edge device connection string.
When prompted, provide the device connection string that you retrieved in step 1. The device connection string associates the physical device with a device ID in IoT Hub.
Reference:
https://docs.microsoft.com/en-us/azure/iot-edge/module-composition
NEW QUESTION # 96
You have an Azure IoT hub named Hub1 and an Azure Time Series Insights environment named tsi1. Tsi1 connects to Hub1. The solution has been operational for 6 months.
Tsi1 is configured as shown in the following exhibit.
Hub1 receives 1 million messages per day. Each message is up to 1 KB and is formatted as JSON.
Hub1 has seven days of retained telemetry.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Reference:
https://docs.microsoft.com/en-us/azure/time-series-insights/time-series-insights-overview
NEW QUESTION # 97
You have an Azure IoT solution that contains an Azure IoT hub.
You need to ensure that the IoT hub configuration is compliant with the Health Insurance Portability and Accountability Act (HIPAA) audit logging requirements.
What should you use?
- A. Azure Monitor alerts
- B. an Azure Sentinel workspace
- C. Azure Advisor recommendations
- D. an Azure Policy definition
Answer: D
Explanation:
Regulatory Compliance in Azure Policy provides Microsoft created and managed initiative definitions, known as built-ins, for the compliance domains and security controls related to different compliance standards, including HIPAA auditing logging.
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/security-controls-policy
NEW QUESTION # 98
You have an Azure IoT hub that uses a Device Provision Service instance.
You plan to deploy 100 IoT devices.
You need to confirm the identity of the devices by using the Device Provision Service.
Which three device attestation mechanisms can you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
- A. 509 certificates based on the standard X.509 certificate authentication flow.
Trusted Platform Module (TPM) based on a nonce challenge, using the TPM 2.0 standard for keys to present a signed Shared Access Signature (SAS) token. This does not require a physical TPM on the device, but the service expects to attest using the endorsement key per the TPM spec. - B. Device Identity Composition Engine (DICE)
D18912E1457D5D1DDCBD40AB3BF70D5D - C. Trusted Platform Module (TPM) 1.2
- D. Trusted Platform Module (TPM) 2.0
- E. X.509 certificates
- F. Symmetric key
Answer: D,E,F
Explanation:
Symmetric Key based on shared access signature (SAS) Security tokens, which include a hashed signature and an embedded expiration.
Explanation:
The Device Provisioning Service supports the following forms of attestation:
Reference:
https://docs.microsoft.com/en-us/azure/iot-dps/concepts-service#attestation-mechanism
NEW QUESTION # 99
You have an Azure 10T solution that includes an loT device named Device1.
You need to enable an loT Plug and Play app for Device1.
How should you complete the device connection? To answer select the appropriate options m the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
NEW QUESTION # 100
HOTSPOT
You have an Azure IoT hub.
You plan to deploy 1,000 IoT devices by using automatic device management.
The device twin is shown below.
You need to configure automatic device management for the deployment.
Which target Condition and Device Twin Path should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:
Answer:
Explanation:
Explanation:
Box 1: tags.engine.warpDriveType='VM105a'
Use tags to target twins. Before you create a configuration, you must specify which devices or modules you want to affect. Azure IoT Hub identifies devices and using tags in the device twin, and identifies modules using tags in the module twin.
Box 2: properties.desired.warpOperating
The twin path, which is the path to the JSON section within the twin desired properties that will be set.
For example, you could set the twin path to properties.desired.chiller-water and then provide the following JSON content:
{
"temperature": 66,
"pressure": 28
}
Reference:
https://docs.microsoft.com/en-us/azure/iot-hub/iot-hub-automatic-device-management Provision and manage devices Testlet 1 Case Study This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Existing Environment. Current State of Development
Contoso produces a set of Bluetooth sensors that read the temperature and humidity. The sensors connect to IoT gateway devices that relay the data.
All the IoT gateway devices connect to an Azure IoT hub named iothub1.
Existing Environment. Device Twin
You plan to implement device twins by using the following JSON sample.
Existing Environment. Azure Stream Analytics
Each room will have between three to five sensors that will generate readings that are sent to a single IoT gateway device. The IoT gateway device will forward all the readings to iothub1 at intervals of between 10 and
60 seconds.
You plan to use a gateway pattern so that each IoT gateway device will have its own IoT Hub device identity.
You draft the following query, which is missing the GROUP BYclause.
SELECT
AVG(temperature),
System.TimeStamp() AS AsaTime
FROM
Iothub
You plan to use a 30-second period to calculate the average temperature reading of the sensors.
You plan to minimize latency between the condition reported by the sensors and the corresponding alert issued by the Stream Analytics job.
Existing Environment. Device Messages
The IoT gateway devices will send messages that contain the following JSON data whenever the temperature exceeds a specified threshold.
The levelproperty will be used to route the messages to an Azure Service Bus queue endpoint named criticalep.
Existing Environment. Issues
You discover connectivity issues between the IoT gateway devices and iothub1, which cause IoT devices to lose connectivity and messages.
Requirements. Planning Changes
Contoso plans to make the following changes:
* Use Stream Analytics to process and view data.
* Use Azure Time Series Insights to visualize data.
* Implement a system to sync device statuses and required settings.
* Add extra information to messages by using message enrichment.
* Create a notification system to send an alert if a condition exceeds a specified threshold.
* Implement a system to identify what causes the intermittent connection issues and lost messages.
Requirements. Technical Requirements
Contoso must meet the following requirements:
* Use the built-in functions of IoT Hub whenever possible.
* Minimize hardware and software costs whenever possible.
* Minimize administrative effort to provision devices at scale.
* Implement a system to trace message flow to and from iothub1.
* Minimize the amount of custom coding required to implement the planned changes.
* Prevent read operations from being negatively affected when you implement additional services.
NEW QUESTION # 101
......
The Most In-Demand AZ-220 Pass Guaranteed Quiz : https://www.examcollectionpass.com/Microsoft/AZ-220-practice-exam-dumps.html
New Version AZ-220 Certificate & Helpful Exam Dumps is Online: https://drive.google.com/open?id=1zSOqF-qqM1aYD7ZABLs9oxtzYypDZlai