Free 2021 Aruba Certified Design Expert (ACDX) HPE6-A80 dumps are available on Google Drive shared by ExamcollectionPass
Welcome to download the newest ExamcollectionPass HPE6-A80 PDF dumps: https://www.examcollectionpass.com/HP/HPE6-A80-practice-exam-dumps.html ( 62 Q&As)
NEW QUESTION 10
What is one customer requirement that can drive the need for a relatively dense AP deployment. In which ire coverage areas of at least three AP radios overlap?
- A. AP operation as hybrid AMs for IDS/WIPS
- B. location tracking of wireless loT devices
- C. support for beacon management
- D. the deployment of dual SGHz radio APs
Answer: C
NEW QUESTION 11
An archinect needs lo plan a Mobility Master (MM) solution for a customer Requirements include:
* redundancy for the MM
* redundancy for the MCS (seamless failover if up to one fails)
The wireless network consists of
* total APs - 300
* total wireless devices = 20,000
* total MCs = 10
The customer wants the most cost-effective plan that meets me requirements.
Which plan for MMs should the architect select?
- A. 2 MM-HW-5K
- B. 2 MM-HW-1QK
- C. 1 MM-HW-5K and 1 MM-HW-1K
- D. 1 MM-HW-5K and 1 MM-VA-1K
Answer: B
NEW QUESTION 12
Refer to the exhibit.
A customer has these availability requirements;
* loss of one controller with stateful failover and without impact on wireless client connectivity
* loss of one core switch without loss of connectivity for any endpoints or APs in the building
* loss of any one switch-lo-switch or MC-to-switch link without loss of connectivity for any endpoints or APS in the building and with minimal impact on infrastructure functionality
* loss of any one access switch with minimal impact to wireless client connectivity The exhibit shows the current plan for the topology.
Which change should the architect make to the plan to provide better support for the customers availability requirements?
- A. Add VLANs 11 and 15 to the MC connections to ensure both MCS can manage any of the APS.
- B. Use two 40GBE DACs between the core V3X switches for their switch links.
- C. Add 120 additional AP licenses, so that each MC can support ail the APs, even if the other MC fails.
- D. Change the 40GbE DAC on the 8400 switch to a stacking cable with stacking module.
Answer: C
NEW QUESTION 13
A customer has an Aruba wireless netwofK with:
* Two 7205 Mobility Controllers (MCs) in a cluster - Each MC must be able to support the complete network in the case of an MC failure
* 250 APs. which support a total of 7.500 devices
* A virtual CxQCQ ClearPass appliance with 1QK Access licenses
* An MM-HW-1K appliance
The customer is interested in an upgrade to Aruba CX Switches, primarily to benefit from the per-user tunneled node feature. The customer requires support for 2500 ports, and 95 percent of wined endpoints will use tunneled node.
Which change to the existing solution should the architect explain?
- A. A separate ClearPass virtual appliance will be required to integrate with the AQS-Switches
- B. The clustering feature will need to be disabled on the controllers, so that they can support tunneled node.
- C. A new controller will be required to support sufficient clients, including the wired ones.
- D. The Mobility Master will need more MM licenses to support the wired endpoints that use tunneled node.
Answer: B
NEW QUESTION 14
For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?
- A. The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.
- B. The Aruba CX6300M supports 10GBase-T connectivity with AP-515.
- C. The customer wants to utilize LACP on AP515 in VSF switch configuration.
- D. The Aruba CX 630DM support up to 75W PoE+ per port
Answer: D
NEW QUESTION 15
A company has several remote sues that operate more or less autonomously. Each site has ns own local services and Internet connection However the company does have a main office with a few centralized resources that the company would like to make available to remote office employees over the Internet connection. Sites range in size and require between 10 and 20 APs.
The customer requires the most cost-effective solution that meets the requirements.
Which solution should the architect recommend for each remote site?
- A. an IAP cluster with an IPsec tunnel to a main office MC
- B. Campus APs (CAPS) with CPSec control channels to a main office MC
- C. Campus APs (CAPs) with a local MC that has an SD-WAN license
- D. Remote APs (RAPs) with IPsec tunnels to a main office MC
Answer: C
NEW QUESTION 16
Refer to the exhibit.
A hotel needs a wireless solution, i he hotel has 802.3af switches.
The architect has selected the 505H Series, controlled by a local MC as the best choice The 5QoH series will need to power a connected phor which have only a single Ethernet port. The architect has created the BOM shown in the exhibit. (Note that this portion of the BOM does not inc Which correction should the architect make?
- A. Upgrade to PoE+ switches.
- B. Change the 5Q5H to the 3Q3HR model.
- C. Remove the mounting adapters.
- D. Propose new direct power source for phone.
Answer: D
NEW QUESTION 17
Refer to the exhibit.
The exhibit shows the design for an existing network. The customer intends to replace the current Core switches with two Aruba 8400 switches.
What are two points that the architect should ensure that the customer understands? (Select two.)
- A. The 8400 switches do not support VSF.
- B. The 8400 switches have a smaller ARP table than the 540OR switches.
- C. The 8400 switches run different software than the 5400R switches.
- D. The 8400 switches are fixed port switches.
- E. The 8400 switches cannot be monitored by AirWave.
Answer: B,C
NEW QUESTION 18
A customer has critical wired endpoints. However, each endpoint has a single Ethernet connection to the network. The customer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection The architect plans to deploy two Aruba CX 6405 switches in the closet.
Which plan provides the greatest redundancy for this scenario?
- A. The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.
- B. The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.
- C. The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.
- D. The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.
Answer: C
NEW QUESTION 19
A company already has an Aruba wireless network The network currently consists of:
* oneMM-HW-1k
* two 7210 MCs in the network core
* two 721GMCsintheDMZ
* 200 AP-515S in Building 1 and Building 5
100 AP-515S each In Building 2r Building 3, and Building 4
The customer now wants to assess if it needs local Mobility controllers (MC) for any buildings:
- Building 1 is the main office building for the campus. It supports the highest number of APs. It connects to the network core without an aggregation layer.
* Building 2 is further away from the Building i. and no roaming is provided between it and the other buildings its access layer connects to the network cone with a pair of Aruba CX 6300M aggregation switches.
* Building 3 is further away from the other buildings, it connects to the network core without an aggregation layer.
The Guest SSID traffic should be tunnelled to the DMZ controllers
' Building 4 has its own local datacenter and Internet connection. The company would like it to be able to operate completely autonomously if its aggregation layer loses connectivity with the core.
* Building 5 is further away from the other buildings, it connects to the network core without an aggregation layer.
This building has been assigned to a partner that would like to manage a dedicated SS1D using the shared AP infrastructure.
In which two buildings should the network architect plan local mobility controllers (MCs)? (Select two)
- A. Building 4
- B. Building 3
- C. Building 1
- D. Building 2
- E. Building 5
Answer: B,C
NEW QUESTION 20
A hospital needs a Getter way to track its inventory Including wireless medical devices that are moved around the site a lot.
Which solution meets these needs?
- A. Aruba asset tags and beacons
- B. Aruba beacons. APs. and AirWave
- C. Aruba beacons and Meridian
- D. Aruba asset tags, APs; and Meridian
Answer: C
NEW QUESTION 21
Refer to the exhibit.
The network architect has created the 60M shown in the exhibit tor a complete new wired ana wireless solution for a customer. This solution the customer wants to discover and manage every component or the network in Airwave, including twins, MCS, APS, and switches.
How many AirWave licenses dees the architect need to add?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 22
Compare the scenarios below. For which scenario do AP-575S meet the needs?
- A. The customer needs APs for an indoor stadium that requires overhead coverage and directional antennas.
- B. The customer needs to mount APs in an outdoor area, but that area only has fiber cable available,
- C. The customer needs APs for an Indoor nigh density environment In which tne customer prefers dual 5GHz operation.
- D. The customer needs APS mounted to a concrete building exterior to provide coverage in a 90 foot (27m) radius from the building.
Answer: B
NEW QUESTION 23
Which scenario Indicates the need for a wireless mesh?
- A. A company needs to provide seamless roaming and wireless access between two buildings. The buildings are about 60 feet (18 m) apart.
- B. A company has a small branch office with just one RAP. The company has noticed that performance is poor in some areas of the network and wants to add another AP.
- C. A hospital needs to provide high availability for wireless services in certain areas which support very critical wireless medical devices. Devices must always be in range of at least two APs.
- D. A nsstorical building has some wired areas and a few areas with no wired or wireless connectivity, walls and ceilings have asbestos. The company needs wireless access across the site.
Answer: A
NEW QUESTION 24
Refer to the exhibit.
A customer requires a core switching solution for a very large multi-building campus with about 30;ooo wireless clients and devices. The network will have a flat topology as shown in the exhibit, and MCs will forward all wireless traffic to the core for routing.
The customer had considered Aruba 5400R Series switches, but the architect recommends Aruba S320 switches Instead.
How should the architect justify this recommendation?
- A. The 3320 switches support a higher density of 10GbE fiber ports than the 5400R Series.
- B. The 8320 switches are required to eliminate the aggregation layer as the customer desires.
- C. The 3320 switches offer more extensive mobility integration features with Aruba MCs and APs than the 54C0R Series switches do.
- D. The 8320 switches have greater performance and larger ARP tables than the 54Q0R Series, as is necessary for a network this size.
Answer: C
NEW QUESTION 25
......
Tested Material Used To HPE6-A80: https://www.examcollectionpass.com/HP/HPE6-A80-practice-exam-dumps.html