CWT-101 Exam PDF [2024] Tests Free Updated Today with Correct 140 Questions
CWNP CWT-101 Exam Preparation Guide and PDF Download
CWNP CWT-101 Exam Topics:
| Section | Objectives |
|---|---|
Basic RF Characteristics (15%) | |
| Describe RF signal characteristics | - Frequency - Amplitude - Phase - Wavelength |
| Explain RF behaviors and signal propagation | - Gain and loss - Reflection - Refraction - Scattering - Free space path loss |
| Understand how to detect RF signal factors | - Wireless scanner tools - Client signal strength reports - RSSI vs. dBm - Output power vs. received signal strength |
| Understand basic RF channel plans | - Available channels by protocol - Regulatory constraints on channel selection - Best practices for channel selection - Co-Channel Interference (CCI) and Co-Channel Contention (CCC) |
| Describe the basic differences among antenna types | - Omnidirectional - Semi-directional - Highly directional - Antenna mounting kits |
| Use the appropriate external antenna when required | - Antenna pattern charts - Antenna cables and connectors - Passive antenna gain |
Wireless Device Features and Capabilities (25%) | |
| Describe device types and varying capabilities | - Laptops - Tablets - Mobile phones - Desktops - Specialty devices (video cameras, Wi-Fi peripheral connections, printers, IoT, etc.) |
| Explain the basic WLAN location processes for 802.11 wireless networks | - Passive scanning - Active scanning |
| Describe the basic steps required in the WLAN connection process for 802.11 wireless networks | - Authentication - Association - 802.1X/EAP authentication - 4-way handshake |
| Determine the RF features supported by client and IoT devices | - Supported channels - Channel widths - Transmit power - Receive sensitivity |
| Configure client and IoT devices | - Configure client drivers for optimum performance (band preference, roaming threshold, regulatory domain, etc.) for 802.11 devices
- Configure various IoT devices based on the supported protocol
|
Wireless Protocol Features and Capabilities (25%) | |
| Identify 802.11 AP features and capabilities and understand configuration options related to them | - PHY and frequency band support - Single-band vs. dual-band - Output power control - Operational modes - Multiple-SSID support - Guest access - Security features - Management interfaces (web-based, CLI, remote CLI) - Internal and external antennas - PoE support |
| Use appropriate 802.11 AP mounting kits for a specified installation location | - Wall mount - Pole/mast mount - Ceiling mount |
| Ensure proper PoE provisioning for 802.11 APs and other wireless devices, when required | - Power levels required - PoE switches - PoE injectors - Testing power availability |
| Ensure IoT devices support the appropriate protocols and configuration | - Common wireless IoT protocols - Use cases for wireless IoT protocols |
Configuration of Security Parameters (15%) | |
| Understand the basics of 802.11 standard security solutions | - WPA vs. WPA2 vs. WPA3 - Personal vs. Enterprise - 6 GHz security requirements - Pre-Shared Key - 802.1X/EAP - Common EAP methods |
| Identify legacy security technologies that should not be used | - WEP - Shared Key Authentication - Hidden SSIDs - MAC filtering |
| Understand the basic security options available for common wireless IoT protocols | |
Troubleshooting Common Wireless Connection Issues (20%) | |
| Troubleshoot connectivity problems | - Configuration errors - Interference - Poor signal strength - Driver issues - Supplicant issues - Feature incompatibility |
| Troubleshoot performance problems | - Configuration errors - Interference - Low data rates - Co-channel interference (CCI) and Co-channel contention (CCC) |
NEW QUESTION # 31
You are considering the use of an EAP method. All potential clients have been validated to support the EAP method.
What other network device/location must support the EAP method for it to work?
- A. Controller
- B. AP
- C. RADIUS Server
- D. Ethernet Switch
Answer: B
NEW QUESTION # 32
What is the term used to describe the increase in signal strength provided by an antenna?
- A. Passive antenna gain
- B. Antenna cables and connectors
- C. Highly directional
- D. Antenna mounting kits
Answer: A
NEW QUESTION # 33
Which type of mount is commonly used for installing an 802.11 AP on a pole or mast?
- A. Ceiling mount
- B. Wall mount
- C. Floor mount
- D. Pole/mast mount
Answer: D
NEW QUESTION # 34
You are experiencing poor call quality on VoIP handsets in a specific area of the building. When you evaluate the area, you see that the strongest AP signal strength in that area is -89 dBm.
All APs use Fast BSS Transition. No other roaming problem areas exist. No other call quality areas exist.
The same VoIP handsets are used everywhere.
What is most likely causing the call quality problems in that area?
- A. Lack of support for 802.11ac on the clients
- B. Client incompatibility with Fast BSS Transition
- C. Lack of support for 802.11ac on the APs
- D. Poor signal strength in the area
Answer: D
NEW QUESTION # 35
What is the maximum power that an 802.3at Power over Ethernet (PoE) injector can output in the Ethernet interface?
- A. 25.5 W
- B. 15.4 W
- C. 30 W
- D. 12.95 W
Answer: A
NEW QUESTION # 36
What does dual-band refer to in the context of an 802.11 AP?
- A. Multiple-SSID support for guest access
- B. Ability to operate in two operational modes
- C. Support for two different frequency bands
- D. Support for two simultaneous wireless connections
Answer: C
NEW QUESTION # 37
What is the term used to describe the decrease in signal strength as an RF signal propagates through space?
- A. Refraction
- B. Free space path loss
- C. Gain and loss
- D. Reflection
Answer: B
NEW QUESTION # 38
Which operating system is commonly used on laptops and desktops?
- A. Chrome OS
- B. Windows
- C. Linux
- D. macOS
Answer: B
NEW QUESTION # 39
Which type of issue can occur if the wireless network features supported by the device are not compatible with the access point?
- A. Feature incompatibility
- B. Configuration errors
- C. Interference
- D. Poor signal strength
Answer: A
NEW QUESTION # 40
How can RF signal propagation be affected by obstacles or materials?
- A. Refraction
- B. Scattering
- C. Gain and loss
- D. Reflection
Answer: B
NEW QUESTION # 41
A user reports that his laptop was rebooted this morning and now he cannot connect to the WLAN.
No other users are reporting connection problems in his work area. No network configuration changes have been made.
Which one of the following is the most likely issue?
- A. The network SSID has changed
- B. The driver was updated and the new version is problematic
- C. Wrong passphrase entered for WPA2 on his laptop
- D. The AP is not allowing his laptop onto the network because it was rebooted and the reboot changed the MAC address
Answer: B
NEW QUESTION # 42
What are some common causes of security problems in wireless networks?
- A. Configuration errors
- B. Incorrect passphrases
- C. Incompatible EAP methods
- D. Incorrect network keys
Answer: A
NEW QUESTION # 43
In what way are 802.11 channels defined?
- A. By a center frequency and channel width
- B. By a high frequency and channel width
- C. By channel width alone
- D. By a low frequency and channel width
Answer: C
NEW QUESTION # 44
What is the term used to describe the process of connecting a wireless device to an access point or network?
- A. Association
- B. Passive scanning
- C. Authentication
- D. Active scanning
Answer: A
NEW QUESTION # 45
Which factor can negatively impact wireless signal strength and cause connectivity issues?
- A. Supplicant issues
- B. Configuration errors
- C. Co-channel interference (CCI)
- D. Interference
Answer: D
NEW QUESTION # 46
......
CWNP CWT-101 Exam Certification Details:
| Sample Questions | CWNP CWT-101 Sample Questions |
| Duration | 90 minutes |
| Exam Registration | PEARSON VUE |
| Passing Score | 70% |
| Exam Name | Wireless Technician |
| Number of Questions | 60 |
Verified & Correct CWT-101 Practice Test Reliable Source Oct 11, 2024 Updated: https://www.examcollectionpass.com/CWNP/CWT-101-practice-exam-dumps.html
Free CWNP CWT-101 Exam Files Downloaded Instantly: https://drive.google.com/open?id=1NZsSFSzWaJgjZnLsUpv4sLiGqM6sOEWm