Based on Official Syllabus Topics of Actual Fortinet NSE5_FMG-7.0 Exam
Free NSE5_FMG-7.0 Dumps are Available for Instant Access
NEW QUESTION 26
Refer to the exhibit.
Given the configuration shown in the exhibit, how did FortiManager handle the service category named General?
- A. FortiManager ignored the firewall service category General but created a new service category in its database.
- B. FortiManager ignored the firewall service category General and did not update Its database with the value
- C. FortiManager ignored the firewall service category General and updated the FortiGate duplicate value in the FortiGate database.
- D. FortiManager ignored the firewall service category general and deleted the duplicate value In Its database
Answer: C
NEW QUESTION 27
Which three settings are the factory default settings on FortiManager? (Choose three.)
- A. Reports and Event Monitor panes are enabled
- B. Password is fortinet
- C. port1 interface IP address is 192.168.1.99/24
- D. Username is admin
- E. FortiAnalyzer features are disabled
Answer: C,D,E
NEW QUESTION 28
Refer to the exhibit.
Which two statements are true if the script is executed using the Device Database option? (Choose two.)
- A. The successful execution of a script on the Device Database will create a new revision history
- B. You must install these changes using the Install Wizard to a managed device
- C. The Device Settings Status will be tagged as Modified
- D. The script history will show successful installation of the script on the remote FortiGate
Answer: B,C
NEW QUESTION 29
Which two items does an FGFM keepalive message include? (Choose two.)
- A. FortiGate license information
- B. FortiGate uptime
- C. FortiGate configuration checksum
- D. FortiGate IPS version
Answer: C,D
NEW QUESTION 30
An administrator would like to review, approve, or reject all the firewall policy changes made by the junior administrators.
How should the Workspace mode be configured on FortiManager?
- A. Set to normal and use the policy locking feature
- B. Set to read/write and use the policy locking feature
- C. Set to disable and use the policy locking feature
- D. Set to workflow and use the ADOM locking feature
Answer: D
NEW QUESTION 31
An administrator would like to create an SD-WAN using central management in the Training ADOM.
To create an SD-WAN using central management, which two steps must be completed? (Choose two.)
- A. Enable SD-WAN central management in the Training ADOM
- B. Remove all the interface references such as routes or policies that will be a part of SD-WAN member interfaces
- C. Configure and install the SD-WAN firewall policy and SD-WAN static route before installing the SD-WAN template settings
- D. Specify a gateway address when you create a default SD-WAN static route
Answer: A,B
NEW QUESTION 32
An administrator with the Super_User profile is unable to log in to FortiManager because of an authentication failure message.
Which troubleshooting step should you take to resolve the issue?
- A. Make sure ADOMs are enabled and the administrator has access to the Global ADOM
- B. Make sure Offline Mode is disabled
- C. Make sure the administrator IP address is part of the trusted hosts.
- D. Make sure FortiManager Access is enabled in the administrator profile
Answer: C
Explanation:
Even if a user entered the correct userid/password, the FMG denies access if a user is logging in from an untrusted source IP subnets.
Topic 1, Main Questions Pool B
NEW QUESTION 33
An administrator would like to create an SD-WAN using central management. What steps does the
administrator need to perform to create an SD-WAN using central management?
- A. Remove all the interface references such as routes or policies
- B. You must specify a gateway address when you create a default static route
- C. First create an SD-WAN firewall policy, add member interfaces to the SD-WAN template and create a static route
- D. Enable SD-WAN central management in the ADOM, add member interfaces, create a static route and SDWAN firewall policies.
Answer: D
NEW QUESTION 34
When an installation is performed from FortiManager, what is the recovery logic used between FortiManager and FortiGate for an FGFM tunnel?
- A. After 15 minutes, FortiGate will unset all CLI commands that were part of the installation that caused the tunnel to go down.
- B. FortiManager will not push the CLI commands as a part of the installation that will cause the tunnel to go down.
- C. FortiGate will reject the CLI commands that will cause the tunnel to go down.
- D. FortiManager will revert and install a previous configuration revision on the managed FortiGate.
Answer: A
NEW QUESTION 35
Refer to the exhibit.
Which statement about the object named ALL is true?
- A. FortiManager installed the object ALL with the updated value.
- B. FortiManager created the object ALL as a unique entity in its database, which can be only used by this managed FortiGate.
- C. FortiManager updated the object ALL using the FortiManager value in its database.
- D. FortiManager updated the object ALL using the FortiGate value in its database.
Answer: D
NEW QUESTION 36
An administrator has added all the devices in a Security Fabric group to FortiManager.
How does the administrator identify the root FortiGate?
- A. By a dollar symbol ($) at the end of the device name
- B. By an Asterisk (*) at the end of the device name
- C. By a Question:
- D. By an at symbol (@) at the end of the device name
Answer: B
NEW QUESTION 37
Which two statements about Security Fabric integration with FortiManager are true? (Choose two.)
- A. The Fabric View module enables you to generate the Security Fabric ratings for Security Fabric devices
- B. The Security Fabric license, group name and password are required for the FortiManager Security Fabric integration
- C. The Fabric View module enables you to view the Security Fabric ratings for Security Fabric devices
- D. The Security Fabric settings are part of the device level settings
Answer: C,D
NEW QUESTION 38
What will happen if FortiAnalyzer features are enabled on FortiManager?
- A. FortiManager will install the logging configuration to the managed devices
- B. FortiManager will keep all the logs and reports on the FortiManager.
- C. FortiManager will enable ADOMs to collect logs automatically from non-FortiGate devices.
- D. FortiManager can be used only as a logging device.
Answer: A
NEW QUESTION 39
Which two conditions trigger FortiManager to create a new revision history? (Choose two.)
- A. When changes to device-level database is made on FortiManager
- B. When configuration revision is reverted to previous revision in the revision history
- C. When FortiManager is auto-updated with configuration changes made directly on a managed device
- D. When FortiManager installs device-level changes to a managed device
Answer: C,D
NEW QUESTION 40
An administrator wants to delete an address object that is currently referenced in a firewall policy.
What can the administrator expect to happen?
- A. FortiManager will replace the deleted address object with all address object in the referenced firewall policy
- B. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy
- C. FortiManager will disable the status of the referenced firewall policy
- D. FortiManager will not allow the administrator to delete a referenced address object
Answer: B
NEW QUESTION 41
Which two statements about the scheduled backup of FortiManager are true? (Choose two.)
- A. It does not back up firmware images saved on FortiManager.
- B. It can be configured using the CLI and GUI.
- C. It supports FTP, SCP, and SFTP.
- D. It backs up all devices and the FortiGuard database.
Answer: A,C
NEW QUESTION 42
In the event that the primary FortiManager fails, which of the following actions must be performed to return the FortiManager HA to a working state?
- A. Manually promote one of the secondary devices to the primary role, and reconfigure all other secondary devices to point to the new primary device.
- B. Reboot one of the secondary devices to promote it automatically to the primary role, and reconfigure all other secondary devices to point to the new primary device.
- C. FortiManager HA state transition is transparent to administrators and does not require any reconfiguration.
- D. Secondary device with highest priority will automatically be promoted to the primary role, and manually reconfigure all other secondary devices to point to the new primary device
Answer: A
Explanation:
FortiManager_6.4_Study_Guide-Online - page 346
FortiManager HA doesn't support IP takeover where an HA state transition is transparent to administrators. If a failure of the primary occurs, the administrator must take corrective action to resolve the problem that may include invoking the state transition. If the primary device fails, the administrator must do the following in order to return the FortiManager HA to a working state:
1. Manually reconfigure one of the secondary devices to become the primary device
2. Reconfigure all other secondary devices to point to the new primary device
NEW QUESTION 43
View the following exhibit.
When using Install Config option to install configuration changes to managed FortiGate, which of the following statements are true? (Choose two.)
- A. Provides the option to preview configuration changes prior to installing them
- B. Will not create new revision in the revision history
- C. Once initiated, the install process cannot be canceled and changes will be installed on the managed device
- D. Installs device-level changes to FortiGate without launching the Install Wizard
Answer: C,D
NEW QUESTION 44
......
The Most In-Demand NSE5_FMG-7.0 Pass Guaranteed Quiz : https://www.examcollectionpass.com/Fortinet/NSE5_FMG-7.0-practice-exam-dumps.html
View All NSE5_FMG-7.0 Actual Exam Questions Answers and Explanations for Free: https://drive.google.com/open?id=1pl9fwHTn9MWz_Nfb_Lq44k9YHDhco_5g