Ace 200-301 Certification with 1800 Actual Questions
PASS Cisco 200-301 EXAM WITH UPDATED DUMPS
Cisco 200-301 exam is also an excellent starting point for those who wish to pursue a career in networking. It provides a solid foundation in networking concepts and technologies, which can help candidates to build a successful career in IT. The CCNA certification is also a prerequisite for many other Cisco certifications, such as the Cisco Certified Network Professional (CCNP) and the Cisco Certified Internetwork Expert (CCIE).
NEW QUESTION # 923
A network security team noticed that an increasing number of employees are becoming victims of phishing attacks. Which security program should be implemented to mitigate the problem?
- A. Physical access control
- B. Email system patches
- C. User awareness training
- D. Software firewall enabled on all PCs
Answer: C
NEW QUESTION # 924
Drag the IPv6 DNS record types from the left onto the description on the right.
Answer:
Explanation:
Explanation:
https://ns1.com/resources/dns-types-records-servers-and-queries#:~:text=Address%20Mapping%20record%20 (A%20Record,a%20hostname%20to%20another%20hostname.
NEW QUESTION # 925
Refer to the exhibit.
An administrator must configure interfaces Gi1/1 and Gi1/3 on switch SW11 PC-1 and PC-2 must be placed in the Data VLAN and Phone-1 must be placed in the Voice VLAN Which configuration meets these requirements?
- A. Option C
- B. Option B
- C. Option A
- D. Option D
Answer: A
NEW QUESTION # 926
Refer to the exhibit.
An engineer has started to configure replacement switch SW1. To verify part of the configuration, the engineer issued the commands as shown and noticed that the entry for PC2 is missing. Which change must be applied to SW1 so that PC1 and PC2 communicate normally?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 927 
Refer to the exhibit. An engineer is creating a secure preshared key based SSID using WPA2 for a wireless network running on 2.4 GHz and 5 GHz. Which two tasks must the engineer perform to complete the process?
(Choose two.)
- A. Select the PSK option for Auth Key Management.
- B. Select the AES (CCMP128) option for WPA2/WPA3 Encryption.
- C. Select the 802.1 x option for Auth Key Management.
- D. Select the WPA Policy option.
- E. Select the AES option for Auth Key Management.
Answer: B,E
NEW QUESTION # 928
Refer to the exhibit.
R5 is the current DR on the network, and R4 is the BDR. Their interfaces are flapping, so a network engineer wants the OSPF network to elect a different DR and BDR. Which set of configurations must the engineer implement?
- A.
- B.
- C.
- D.
Answer: D
NEW QUESTION # 929
Drag and drop the functions from the left onto the correct network components on the right
Answer:
Explanation:
Explanation:
NEW QUESTION # 930
Which attribute does a router use to select the best path when two or more different routes to the same destination exist from two different routing protocols.
- A. dual algorithm
- B. metric
- C. administrative distance
- D. hop count
Answer: C
Explanation:
Administrative distance is the feature used by routers to select the best path when there are two or more different routes to the same destination from different routing protocols. Administrative distance defines the reliability of a routing protocol.
NEW QUESTION # 931
A manager asks a network engineer to advise which cloud service models are used so employees do not have to waste their time installing, managing, and updating software which is only used occasionally Which cloud service model does the engineer recommend?
- A. business process as service to support different types of service
- B. infrastructure-as-a-service
- C. software-as-a-service
- D. platform-as-a-service
Answer: C
NEW QUESTION # 932
Refer to the exhibit.
How many objects, Keys and JSON list values are present?
- A. one object, three keys and two JSON list values
- B. one object, three keys, and three JSON list values
- C. three objects, two Keys, and three JSON list values
- D. three objects, three keys and two JSON Ml values
Answer: B
NEW QUESTION # 933
Refer to the exhibit.
The DHCP server and clients are connected to the same switch. What is the next step to complete the DHCP configuration to allow clients on VLAN 1 to receive addresses from the DHCP server?
- A. Configure the ip dhcp snooping trust command on the interface that is connected to the DHCP server.
- B. Configure the ip dhcp snooping trust command on the interlace that is connected to the DHCP client.
- C. Configure the ip dhcp relay information option command on the interface that is connected to the DHCP client.
- D. Configure the Ip dhcp relay information option command on the interface that is connected to the DHCP server.
Answer: A
NEW QUESTION # 934
What does WPA3 provide in wireless networking?
- A. increased security and requirement of a complex configuration
- B. backward compatibility with WPAand WPA2
- C. optional Protected Management Frame negotiation
- D. safeguards against brute force attacks with SAE
Answer: D
Explanation:
https://www.swascan.com/wi-fi-security/
NEW QUESTION # 935
Drag and drop the TCP or UDP details from the left onto their corresponding protocols on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 936 
Refer to the exhibit. IPv6 is being Implemented within the enterprise. The command Ipv6 unlcast-routing is configure. Interlace GlgO/0 on R1 must be configured to provide a dynamic assignment using the assigned IPv6 block Which command accomplishes this task?
- A. ipv6 address 2001:DB8:FFFF:FCF3::/64 link-local
- B. ipv6 address autoconfig 2001:DB8:FFFF:FCF2::/64
- C. ipv6 address 2001:DB8:FFFF:FCF3::/64 eui-64
- D. ipv6 address 2001:DB8:FFFF:FCF3::1/64
Answer: C
NEW QUESTION # 937
Refer to the exhibit.
Refer to the exhibit. All routers in the network are configured R2 must be the DR. After the engineer connected the devices, R1 was elected as the DR. Which command sequence must be configure on R2 to Be elected as the DR in the network?
- A. Option B
- B. Option A
- C. Option C
- D. Option D
Answer: A
NEW QUESTION # 938
Which two transport layer protocols carry syslog messages? (Choose two.)
- A. RTP
- B. ARP
- C. IP
- D. TCP
- E. UDP
Answer: D,E
Explanation:
The two transport layer protocols commonly used to carry syslog messages are:
User Datagram Protocol (UDP): UDP is a connectionless and lightweight transport layer protocol.
It is widely used for syslog due to its simplicity and efficiency. Syslog messages transmitted over UDP are typically sent from the source to the destination without the need for acknowledgments or establishing a connection. However, UDP does not guarantee reliable delivery, and messages may be lost or arrive out of order in case of network congestion or errors.
Transmission Control Protocol (TCP): TCP is a connection-oriented and reliable transport layer protocol. While less commonly used for syslog compared to UDP, TCP can be used when reliable delivery of syslog messages is required. TCP establishes a connection between the source and destination and ensures the ordered delivery of messages. It provides acknowledgment mechanisms and retransmission of lost packets, making it suitable for scenarios where message integrity and completeness are critical.
NEW QUESTION # 939
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 940
Refer to the Exhibit.
IP connectivity between the three routers is configured. OSPF adjacencies must be established.
1. Configure R1 and R2 Router IDs using the interface IP addresses from the link that is shared between them.
2. Configure the R2 links with a max value facing R1 and R3. R2 must become the DR. R1 and R3 links facing R2 must remain with the default OSPF configuration for DR election. Verify the configuration after clearing the OSPF process.
3. Using a host wildcard mask, configure all three routers to advertise their respective Loopback1 networks.
4. Configure the link between R1 and R3 to disable their ability to add other OSPF routers.
- A. Se ethe Explanation below
Answer: A
Explanation:
Answer as below configuration:
on R1
conf terminal
interface Loopback0
ip address 10.10.1.1 255.255.255.255
!
interface Loopback1
ip address 192.168.1.1 255.255.255.0
!
interface Ethernet0/0
no shut
ip address 10.10.12.1 255.255.255.0
ip ospf 1 area 0
duplex auto
!
interface Ethernet0/1
no shut
ip address 10.10.13.1 255.255.255.0
ip ospf 1 area 0
duplex auto
!
router ospf 1
router-id 10.10.12.1
network 10.10.1.1 0.0.0.0 area 0
network 192.168.1.0 0.0.0.255 area 0
!
copy run star
---------------------------------------
On R2
conf terminal
interface Loopback0
ip address 10.10.2.2 255.255.255.255
!
interface Loopback1
ip address 192.168.2.2 255.255.255.0
!
interface Ethernet0/0
no shut
ip address 10.10.12.2 255.255.255.0
ip ospf priority 255
ip ospf 1 area 0
duplex auto
!
interface Ethernet0/2
no shut
ip address 10.10.23.2 255.255.255.0
ip ospf priority 255
ip ospf 1 area 0
duplex auto
!
router ospf 1
network 10.10.2.2 0.0.0.0 area 0
network 192.168.2.0 0.0.0.255 area 0
!
copy runs start
-----------------------
On R3
conf ter
interface Loopback0
ip address 10.10.3.3 255.255.255.255
!
interface Loopback1
ip address 192.168.3.3 255.255.255.0
!
interface Ethernet0/1
no shut
ip address 10.10.13.3 255.255.255.0
ip ospf 1 area 0
duplex auto
!
interface Ethernet0/2
no shut
ip address 10.10.23.3 255.255.255.0
ip ospf 1 area 0
duplex auto
!
router ospf 1
network 10.10.3.3 0.0.0.0 area 0
network 192.168.3.0 0.0.0.255 area 0
!
copy run start
!
NEW QUESTION # 941
Drag and drop the AAA functions from the left onto the correct AAA services on the right
Answer:
Explanation:
NEW QUESTION # 942
Refer to the exhibit.
What is a reason for poor performance on the network interface?
- A. The interface is operating at a different speed than the connected device.
- B. The cable connection between the two devices is faulty.
- C. The bandwidth setting of the interface is misconfigured
- D. The interface is receiving excessive broadcast traffic.
Answer: D
NEW QUESTION # 943
Refer to the exhibit.
Router R1 is running three different routing protocols. Which route characteristic is used by the router to forward the packet that it receives for destination IP 172.16.32.1?
- A. administrative distance
- B. metric
- C. longest prefix
- D. cost
Answer: C
NEW QUESTION # 944
Drag and drop the characteristic from the left onto the IPv6 address type on the right.
Answer:
Explanation:
Explanation:
NEW QUESTION # 945
Drag and drop the statements about networking from me left onto the corresponding networking types on the right
Answer:
Explanation:
Explanation:
NEW QUESTION # 946
An engineer is configuring switch SW1 to act an NTP server when all upstream NTP server connectivity fails. Which configuration must be used?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 947
......
200-301 Questions PDF [2026] Use Valid New dump to Clear Exam: https://www.examcollectionpass.com/Cisco/200-301-practice-exam-dumps.html
Passing Cisco 200-301 Exam Using 2026 Practice Tests: https://drive.google.com/open?id=1K6uG1kXhFIBMhSDr8jSHltRq9e1UB7BR