300-430 Exam Questions Dumps, Selling Cisco Products
300-430 Cert Guide PDF 100% Cover Real Exam Questions
Difficulty in Writing Cisco 300-430: Implementing Cisco Enterprise Wireless Networks Exam
The Implementation of the Cisco wireless networks (300-430) certification is one of the most important certifications that applicants can have on their CV. One of the biggest challenges for many candidates is to use the Internet to find so many details that make it impossible for them to believe, which would be beneficial for them to choose the correct 300-430 practice test.
However, applicants can clear the examination with the correct concentration and the correct preparatory material. ExamcollectionPass have the most up to date 300-430 dumps that allows a clear understanding of the pattern in questions raised by these dumping aspirants with real certification. The experts track qualification questions for all the changes in the course. Certification problems also require realistic research, which is an ideal forum to test the knowledge that is collected. For the study content, refer to the links below.
Preparation Process for Cisco 300-430 Exam
The potential candidates for Cisco 300-430 can explore a wide range of resources for their preparation for this exam. To get started, Cisco recommends the official training course, which is Implementing Cisco Enterprise Wireless Networks v1.1. This option equips them with the skills and knowledge required to develop secure wireless network infrastructures as well as troubleshoot any associated issues. They also will discover the process of implementing and fortifying wireless network infrastructures with the use of Cisco Identity Service Engine, Cisco Connect Mobile Experience, and Cisco Prime Infrastructure for troubleshooting and monitoring the network issues. Other tools that can be used for your preparation process include practice tests, video tutorials, flashcards, and more. These materials are available on various reputable IT training platforms.
NEW QUESTION 30
An engineer is implementing Cisco Identity-Based Networking on a Cisco AireOS controller. The engineer has two ACLs on the controller. The first ACL, named BASE_ACL, is applied to the corporate_clients interface on the WLC, which is used for all corporate clients. The second ACL, named HR_ACL, is referenced by ISE in the Human Resources group policy. What is the resulting ACL when a Human Resources user connects?
- A. BASE_ACL appended with HR_ACL
- B. BASE_ACL only
- C. HR_ACL only
- D. HR_ACL appended with BASE_ACL
Answer: C
Explanation:
https://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/98590-Per-User-ACL-WLC.html#configure-acs
NEW QUESTION 31
An engineer must implement rogue containment for an SSID. What is the maximum number of APs that should be used for containment?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: A
Explanation:
NEW QUESTION 32
An engineer must configure a Cisco WLC to support Cisco Aironet 600 Series OfficeExtend APs. Which two Layer 2 security options are supported in this environment? (Choose two.)
- A. Static WEP + 802.1X
- B. WPA+WPA2
- C. Static WEP
- D. CKIP
- E. 802.1X
Answer: B,C
NEW QUESTION 33
An engineer wants to configure WebEx to adjust the precedence and override the QoS profile on the WLAN.
Which configuration is needed to complete this task?
- A. Create an ACL for WebEx
- B. Change the AVC application WebEx-app-sharing to mark
- C. Change the WLAN reserved bandwidth for WebEx
- D. Create an AVC profile for WebEx
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/AVC_dg7point5.html
NEW QUESTION 34
Which three properties are used for client profiling of wireless clients? (Choose three.)
- A. MAC OUI
- B. DHCP
- C. HTTP user agent
- D. hostname
- E. IP address
- F. OS version
Answer: A,B,C
NEW QUESTION 35
Which component must be integrated with Cisco DNA Center to display the location of a client that is experiencing connectivity issues?
- A. Cisco Hyperlocation Module
- B. Cisco Connected Mobile Experiences
- C. Cisco Mobility Services Engine
- D. Wireless Intrusion Prevention System
Answer: B
Explanation:
NEW QUESTION 36
An engineer must use Cisco AVC on a Cisco WLC to prioritize Cisco IP cameras that use the wireless network. Which element do you configure in a rule?
- A. rate-limit
- B. mark
- C. WMM required
- D. permit-ACL
Answer: B
Explanation:
NEW QUESTION 37
An engineer is implementing a FlexConnect group for access points at a remote location using local switching but central DHCP. Which client feature becomes available only if this configuration is changed?
- A. multicast
- B. fast roaming
- C. mDNS
- D. static IP
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-7/config-guide/b_cg87/flexconnect.html
NEW QUESTION 38
An engineer is configuring multicast for wireless for an all-company video meeting on a network using EIGRP and BGP within a single domain from a single source. Which type of multicast routing should be implemented?
- A. Protocol Independent Multicast Dense Mode
- B. Multicast Source Discovery Protocol
- C. Source Specific Multicast
- D. Protocol Independent Multicast Sparse Mode
Answer: C
Explanation:
NEW QUESTION 39
Refer to the exhibit.
A customer has implemented Cisco FlexConnect deployments with different WLANs around the global and is opening a new branch in a different location. The engineers' task is to execute all the wireless configuration and to suggest how to configure the switch ports for new Aps. Which configuration must the switching team use on the switch ports?
- A. Trunk mode
- B. Access mode
- C. Multiple VLAN
- D. Single mode
Answer: A
NEW QUESTION 40
The IT manager is asking the wireless team to get a report for all guest user associations during the past two weeks. In which two formats can Cisco Prime save this report? (Choose two.)
- A. DOC
- B. XLS
- C. PDF
- D. plain text
- E. CSV
Answer: C,E
Explanation:
NEW QUESTION 41
Which AP model of the Cisco Aironet Active Sensor is used with Cisco DNA Center?
- A. 4800i
- B. 1800s
- C. 3800s
- D. 3600e
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/products/collateral/wireless/aironet-active-sensor/guide-c07-743929.html
NEW QUESTION 42
Refer to the exhibit.
An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
- A. Configure the certificate on the WLC.
- B. Configure the certificate, WLAN, and radio interface on WGB.
- C. Configure the access point with the root certificate from ISE.
- D. Configure a policy on ISE to allow devices to connect that validate the certificate.
- E. Configure WGB as a network device in ISE.
- F. Configure WLAN to authenticate using ISE.
Answer: B,D,F
Explanation:
https://mrncciew.com/2018/05/25/wgb-with-peap/
NEW QUESTION 43
Refer to the exhibit.
An engineer is creating an ACL to restrict some traffic to the WLC CPU. Which selection must be made from the direction drop-down list?
- A. Packet direction has no significance; it is always Any.
- B. To have the complete list of options, the CPU ACL must be created only by the CLI.
- C. It must be Inbound because traffic goes to the WLC.
- D. It must be Outbound because it is traffic that is generated from the WLC.
Answer: C
NEW QUESTION 44
An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message. Which action must be taken to resolve authentication?
- A. Disable the server certificate to be validated on the client.
- B. Replace the client certificates from the CA with the server certificate.
- C. Update the client certificate to match the user account.
- D. Use the user password that is configured on the server.
Answer: C
NEW QUESTION 45
What is the difference between PIM sparse mode and PIM dense mode?
- A. Sparse mode supports only one switch. Dense mode supports multiswitch networks.
- B. Sparse mode floods. Dense mode uses distribution trees.
- C. Sparse mode supports multiswitch networks. Dense mode supports only one switch.
- D. Sparse mode uses distribution trees. Dense mode floods.
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipmulti_pim/configuration/xe-16/imc-pim-xe-16-book/imc-te
NEW QUESTION 46
......
Pass 300-430 Exam - Real Questions & Answers: https://www.examcollectionpass.com/Cisco/300-430-practice-exam-dumps.html
Pass 300-430 Review Guide, Reliable 300-430 Test Engine: https://drive.google.com/open?id=1hyYJDlf4yoeJ0P4fE3v5lk9Q07VeZWdi