2022 HPE0-S22 Question Bank: Free PDF Download Recently Updated Questions
HPE0-S22 Certification Exam Dumps with 98 Practice Test Questions
NEW QUESTION 44
View the Exhibit.
Refer to the exhibit. A customer has an HPE c7000 enclosure managed by HPE OneView with HP BL460c Gen9 servers in a vSphere cluster. The customer has multiple vLANs trunked from the top of rack (TOR) switches to the Virtual Connect modules in the enclosure. Due to network Access Control List (ACL) requirement and guidelines from the networking department, all network traffic should be forced to an upstream switch using the Virtual Connect "Private Network" feature.
The customer reports slow network response.
Which modification can the architect recommend to improve network performance?
- A. Put the vMotion network in a separate uplink set and disable "Private Network".
- B. Change the FlexFabric 20/40 adapter modules with Flex 10/100 modules.
- C. Remove the Management network from the uplinks.
- D. Change the FlexFabric adapter modules with Flex-10 adapter modules.
Answer: B
NEW QUESTION 45
A customer has a mixed environment based on the G6, G7, Gen8, and Gen9 ProLiant server blades. The customer is interested in implementing HPE OneView but needs to understand security and monitoring mechanisms for different server generations.
Which statement most accurately describes different platform support in HPE OneView?
- A. WBEM Providers will be used for any server managed by HPE OneView.
- B. HPE OneView can manage G7, Gen8/Gen9 servers, while G6 servers can only be monitored.
- C. The customer can select from different management protocols between SNMP v2 and SNMP v3 to match the security requirements.
- D. All servers managed by HPE OneView will use WBEM Providers, but collected data must be translated to the SNMP traps using embedded WMI Mapper.
Answer: A
NEW QUESTION 46
An architect is proposing a solution that has two HPE Moonshot 1500 chassis, each of which is full of m700 cartridges. The customer needs the solution to quickly deploy the OS to cartridges, back up a golden node image, and clone the image.
The customer is concerned about cost and is not interested in managing or monitoring performance of the solution.
Which solution meets these requirements?
- A. HPE Insight Control server provisioning (ICsp)
- B. HPE Insight Cluster Management Utility (CMU)
- C. HPE Intelligent Provisioning (IP)
- D. HPE OneView 2.0
Answer: B
Explanation:
Explanation
NEW QUESTION 47
An architect has selected the FlexibleLOM option for HPE XL230a compute trays, which will host an HPC application.
When should the architect select a FlexibleLOM adapter that supports Fibre Channel over Ethernet (FCoE)?
- A. when the application requires additional bandwidth and needs a solution for load sharing traffic over multiple links
- B. when the application uses a Fibre Channel storage area network (SAN) for its shared storage solution
- C. when the application uses parallel computing and relies on Fibre Channel to reduce latency for communications between compute nodes
- D. when the application requires high throughput between processors and disk drives local to the same compute tray
Answer: C
NEW QUESTION 48
A customer needs a hosted physical desktop solution. Users will run typical oꢀice applications with limited use of some media-rich applications such as Adobe Photoshop. The customer needs the densest and most cost-effective solution that can support such users.
Which HPE Moonshot cartridge should the architect recommend?
- A. HPE m710p
- B. HPE m700
- C. HPE m710
- D. HPE m400
Answer: A
Explanation:
Explanation/Reference:
Reference https://www.hpe.com/us/en/product-catalog/servers/moonshot-systems/pip.hpe-proliant-m710p- server-cartridge.8732043.html
NEW QUESTION 49
An architect has selected the FlexibleLOM option fur HPE XL230a compute trays, which will host an HPC application.
When should the architect select a FlexibleLOM adapter that supports Fibre Channel over
Ethernet (FCoE)?
- A. when the application requires additional bandwidth and needs a solution for load sharing traffic over multiple links
- B. when the application uses a Fibre Channel storage area network (SAN) for its shared storage solution
- C. when the application uses parallel computing and relies on Fibre Channel to reduce latency for communications between compute nodes
- D. when the application requires high throughput between processors and disk drives local to the same compute tray
Answer: C
NEW QUESTION 50
A customer plans to add a high performance computing system capable of hard partitioning to a data center that employs HPE StoreServ 7000.
Which solution should the architect include in the design?
- A. an HPE Apollo 2000 system with iSCSI connectivity to the HPE 3PAR system
- B. an HPE Moonshot system with iSCSI connectivity to the HPE 3PAR system
- C. an HPE SuperdomeX with Fibre Channel connectivity to the HPE 3PAR storage
- D. an HPE Apolo6000 with Fibre Channel connectivity to the HPE 3PAR storage
Answer: C
NEW QUESTION 51
A customer purchases a hyperscale solution based on the HPE Moonshot platform and needs a management tool is suitable for this environment and meets the customer's needs?
- A. HPE Insight Cluster Management Utility
- B. HPE Cloud OS for HPE Moonshot
- C. HPE Helion Cloud System 9 Foundation
- D. HPE OneView with HPE Operation Analytics plugin
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION 52
An architect is planning an HPE Apollo 4530 solution to support the Cloudera distribution of Spark and HDFS. Each HPE ProLiant XL450 in the solution uses the following baseline recommendations:
- 15 8TB HDDs (120TB total)
- 2 10-core 2.3GHz processors
- 128GB memory (64GB on each processor)
- 2-port 10GbE FlexibleLOM
The architect has planned enough servers to meet the customer's requirements for total capacity.
Which two components in this plan are most likely to cause a bottleneck as an increasing number of Spark applications run?
- A. processor and memory
- B. drive capacity and memory
- C. drive type (HDD versus SSD) and drive capacity
- D. adapter bandwidth and processors
Answer: B
NEW QUESTION 53
View the Exhibit.
Refer to the exhibit. An architect is planning an HPE Moonshot System with m710 cartridges to support a customer application virtualization solution. The customer indicated that the maximum acceptable response time for the solution is three seconds. The architect has implemented a POC and tested a single cartridge with different numbers of user sessions.
The architect monitored resource utilization throughout the tests. The results of the test with the point at which the response time exceeded three seconds are shown, marked as the "VSI max."
What should the architect conclude from this test?
- A. None of the monitored resources shows signs of being a bottleneck, so the architect should consider other factors such as the HPE Moonshot switch module.
- B. CPU becomes a limiting factor around 50 sessions, so the architect should propose at least one cartridge per 45 or 50 users.
- C. The memory becomes a bottleneck before other resources, so the architect should propose m400cartridges, which provide a higher memory capacity.
- D. The network adapter becomes a bottleneck before other resources, so the architect should propose m710pcartridges, which provide 10GbE ports.
Answer: D
NEW QUESTION 54
A customer is planning a multi-threaded HPC solution that would benefit from threads running in parallel.
The architect selects the HPE Apollo 6000 and needs to choose between the HPE XL230a and the XL250a compute tray.
What is one reason for choosing the XL250a tray?
- A. The HPE XL250a server supports DDR4 HPE Smart Memory.
- B. The HPE XL250a server supports dual accelerators.
- C. The HPE XL250a server delivers dual processor performance.
- D. The HPE XL250a server provides full length PCIe expansion slots.
Answer: B
Explanation:
The HPE ProLiant XL250a Gen9 Server delivers 2P performance for your budget with dual accelerator support, while leveraging the HPE Apollo 6000 System and its modular flexibility and rack-scale efficiency. This server features the Intel® Xeon® E5-2600 v3/v4 series processors and 16 DIMM slots are ready with DDR4 2133 (1024 GB maximum)/2400 (2048 GB maximum) MHz memory and HPE Smart Memory.
References:
NEW QUESTION 55
Which statement describes the availability metrics for an HPE system's high availability?
- A. A system with an availability of 99.99% can be expected to be inoperational for 6 minutes or fewer per year.
- B. A system with an availability of 99.999% will statistically not have an unscheduled downtime of more than 1 hour total in 10 years of operation.
- C. A system consisting of HPE standard servers with an availability of 99.9999% and a storage with an availability of 99.99% will have a combined availability of 99.99999%.
- D. All standard HPE servers are designed for 99.9999% availability.
Answer: C
NEW QUESTION 56
A customer is working on a project to enable workplace productivity. The customer needs a solution that will allow employees to connect to their workplace environment by using a personal mobile phone, tablet, laptop, or desktop computer. Employees must be able to stop and resume work seamlessly while travelling between offices.
Which purpose-built hardware can the customer use to help achieve this goal?
- A. HPE Moonshot to provide hosted physical desktop and application virtualization t mobile users
- B. HPE Apollo 2000 to provide hosted physical desktop and application virtualization to mobile users
- C. HPE Apollo 2000 to provide VDI access to mobile users
- D. HPE Moonshot to provide VDI access to mobile users
Answer: A
NEW QUESTION 57
Which discussion point describes a Tier I approach to datacenter redundancy levels?
- A. using a single path for power and cooling distribution without redundant components
- B. composing the solution of basic hypervisor clustering technology
- C. optimizing DIMM memory and RAID protected storage
- D. implementing primarily a storage redundancy technique
Answer: B
Explanation:
Explanation/Reference:
NEW QUESTION 58
An architect is positioning a scale-up solution to a customer. The solution will reduce the customer's server sprawl by reducing 100 legacy virtualization hosts while improving performance.
Which HPE platform provides an appropriate solution?
- A. HPE Synergy
- B. HPE Apollo Systems
- C. HPE Integrity Superdome X
- D. HPE Hyper-converged systems
Answer: D
NEW QUESTION 59
An architect finds several vulnerabilities with a customer's digital enterprise that could lead to data loss on a third-party storage system for critical business segments.
Which solution should the architect propose to help the customer to protect their digital enterprise?
- A. an HPE StoreVirtual solution configured as a secondary node to replicate the critical data on the third-party storage
- B. an HPE StoreOnce solution configured to take backups of the critical data from the third- party storage
- C. an HPE StoreAll solution configured to migrate the critical data to object-based storage
- D. an HPE 3PAR StoreServ solution configured to peer persistence with the third-party storage to protect the critical data
Answer: D
NEW QUESTION 60
An architect is planning an HPE Moonshot System deployment. The architect plans to individually connect each iLO CM module to the management network. The customer informs the architect that this plan requires too many 1GbE ports per rack for the data center infrastructure.
What is one way that the architect can alter the plan to meet the customer's needs, while still allowing iLO access to the HPE Moonshot Systems?
- A. Configure iLO traffic to share the same adapters as production traffic. Configure VLANs on the HPE Moonshot switch modules to separate the two types of traffic.
- B. Keep one iLO CM Management port connected to the network. Use the iLO CM link ports on each iLO CM module to daisy chain the chassis together.
- C. Add a second switch module and uplink module to each chassis to connect to the cartridge iLO ports. Stack the modules in different chassis and connect just one to the management network.
- D. Enable the iLO REST API on each cartridge node. The nodes will then accept iLO commands on the adapters that they use for production traffic.
Answer: C
NEW QUESTION 61
An architect is planning an HPE Moonshot System solution to support a data analytics application. The application uses data mining.
Which type of rack configuration should the architect recommend?
- A. a configuration that has a lower ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- B. a configuration that balances the ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- C. a configuration that has a higher ratio of HPE Moonshot Systems to HPE Apollo 4200 servers, which store the data
- D. a configuration in which the HPE Moonshot System hosts the analytics application and the data
Answer: C
NEW QUESTION 62
An architect takes the following notes during a meeting with a customer:
* plans to introduce an entirely new service offering to customers
* servers will be virtualized and will consume large amounts of storage space
* project is to operate in an isolated section of the data center with limited access to the corporate network
* need flexibility to grow quickly as required by the new service demands on the infrastructure
* has no repeatable process for firmware management
* concerned about how long it will take for the project team to become productive on the new infrastructure Which solution should the architect propose to help the customer overcome all of its project challenges?
- A. HPE Apollo 6000 solution with HPE 3PAR storage
- B. HPE BladeSystem solution with HPE 3PAR storage
- C. HPE Apollo 2000 solution with HPE 3PAR storage
- D. HPE ConvergedSystem 700 solution with HPE 3PAR storage
Answer: A
NEW QUESTION 63
An architect is proposing an HPE Moonshot System, including m710 cartridges, an iLO Chassis Manager, switch, and uplink modules. The customer needs IT staff to be able to access cartridges over a Remote console.
What should the architect explain to the customer?
- A. IT staff can open a Remote Console to any cartridge linked to an mRCA through the iLO CM.
- B. Remote Console access is not supported for cartridges; IT staff should use local consoles instead.
- C. Remote Console access is only supported when a cartridge is part of an HPE Helion CloudSystem 9.x solution.
- D. IT staff can open a Remote Console to any cartridge through the iLO CM.
Answer: A
NEW QUESTION 64
A customer needs an HPE Apollo 6000 solution and Remote Direct Memory Access (RDMA).
Which network interconnects should the architect recommend for this solution? (Choose two.)
- A. GbEthernet
- B. FlexFabric
- C. 16 Gb Fibre Channel
- D. 12G SAS
- E. Infiniband
Answer: A,E
NEW QUESTION 65
......
HP HPE0-S22 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
New HPE0-S22 Exam Dumps with High Passing Rate: https://www.examcollectionpass.com/HP/HPE0-S22-practice-exam-dumps.html