2021 Updated Network Appliance NS0-173 Dumps PDF - Want To Pass NS0-173 Fast
NS0-173 Practice Exam Dumps - 99% Marks In Network Appliance Exam
NEW QUESTION 25
Two data centers are 75km apart. The customer wants to deploy a FlexPod solution in each data center to maintain high availability between the two sites with minimal possible data loss.
In this scenario, which technology would you use at the NetApp storage layer?
- A. SnapVault
- B. SnapMirror
- C. FlexArray
- D. MetroCluster
Answer: D
NEW QUESTION 26
You want to deploy a FlexPod Datacenter solution based on the minimum hardware requirements.
Which three components must be deployed in highly available pairs to accomplish this task? (Choose three.)
- A. Cisco UCS 5108 Chassis
- B. Cisco APICs
- C. Cisco USC Nexus Switches
- D. Cisco UCS Fabric Interconnects
- E. NetApp FAS Storage Controllers
Answer: A,D,E
NEW QUESTION 27
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 2
- B. LUN 3
- C. LUN 0
- D. LUN 1
Section: (none)
Explanation
Answer: C
NEW QUESTION 28
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?
- A. Nexus 9000
- B. Nexus 5000
- C. Nexus 7000
- D. Nexus 3000
Answer: A
NEW QUESTION 29
A customer wants to deploy a performance-sensitive workload while leveraging NetApp Snapshot technology and technologies such as NAS and SAN.
Which architecture satisfies these requirements?
- A. NetApp SolidFire
- B. NetApp AFF
- C. NetApp StorageGRID
- D. NetApp EF-Series
Answer: A
NEW QUESTION 30
The storage administrator must change the vHBA settings bound to a template associated with a production server.
What happens when the settings are reconfigured in this scenario?
- A. The server that is associated with the service profile reboots.
- B. The vHBA template is deleted from UCS Manager.
- C. The vHBA configuration change does not affect LUN access.
- D. The service profile template that is associated with the server is initialized.
Answer: D
NEW QUESTION 31
You are configuring high availability within the network layer of your FlexPod configuration.
In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches?
(Choose two.)
- A. The vPC auto-recovery feature should be enabled.
- B. Peer keep-alive connectivity between the switches should be established.
- C. A minimum of four 10GB Ethernet connections are required for vPC.
- D. Port channels should be configured for LACP passive mode.
Answer: B,C
Explanation:
vPC also relies on the periodic keepalive messages to determine when one of the connected devices on the peer link fails.
vPC peer link - The link used to synchronize states between the vPC peer devices. Both ends must be on 10- Gigabit Ethernet or 40-Gigabit Ethernet interfaces.
Reference:
configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/ b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
NEW QUESTION 32
A customer is designing a FlexPod solution with VMware 6.x in a SAN boot environment using FCoE. The customer has predetermined the WWPN values for the NetApp LIFs and the UCS vHBAs. The customer is now working on the design workflow for the SAN boot process.
In this scenario, which three FlexPod environment objects are required for SAN connectivity? (Choose three.)
- A. NetApp export policies
- B. UCS boot policies
- C. FC zones
- D. UCS IQN pools
- E. initiator groups
Answer: A,B,D
NEW QUESTION 33
A customer wants to configure SAN boot for its FlexPod system. The customer must consider the minimum number of FC ports to be configured on each node in the ONTAP storage solution.
In this scenario, what is the minimum number of FC ports that should be configured per storage node?
- A. three
- B. one
- C. four
- D. two
Answer: A
NEW QUESTION 34
A customer recently configured its Cisco UCS, and within the Chassis Discovery policy, they set the link group preference to Port Channel.
Which two benefits would they derive from this link group preference? (Choose two.)
- A. All the links between the Cisco Fabric Interconnects and chassis IOM are pinned.
- B. All the links between the Cisco Fabric Interconnects and chassis IOM are shared.
- C. Traffic is load balanced across the links.
- D. Each blade has an assigned Cisco Fabric Interconnects link.
Answer: B,C
NEW QUESTION 35
After you install a FlexPod infrastructure at a customer site, you need to migrate the existing Vmware virtual machines off the infrastructure that was used before FlexPod was installed.
Which VMware vSphere feature accomplishes this task?
- A. vSphere DRS
- B. VM Component Protection
- C. vSphere HA
- D. vMotion
Answer: D
NEW QUESTION 36
A customer is designing a FlexPod Datacenter with Cisco UCS C-Series servers. They intend to manage the solution with Cisco UCS Manager. They want to cable the servers to the Cisco UCS Fabric Interconnects.
In this scenario, which three configurations are supported? (Choose three.)
- A. Multipath mode
- B. DualWire Management mode
- C. SingleConnect mode
- D. Cluster mode
- E. Direct Connect mode
Answer: B,C,E
Explanation:
Dual-wire Management (Shared LOM): Shared LAN on Motherboard (LOM) ports on the rack server are used exclusively for carrying management traffic. A separate cable connected to one of the ports on the PCIe card carries the data traffic. Using two separate cables for managing data traffic and management traffic is also referred to as dual-wire management.
SingleConnect (Sideband): Using Network Controller Sideband Interface (NC-SI), the Cisco VIC card connects one cable that can carry both data traffic and management traffic. This feature is referred to as SingleConnect.
Direct Connect Mode: Cisco UCS Manager supports an option to connect the Cisco UCS C-Series Rack- Mount Server directly to the FIs. This option enables Cisco UCS Manager to manage the Cisco UCS C- Series Rack-Mount Servers using a single cable for both management traffic and data traffic. The Cisco UCS VIC connects to the FI of the system. This connection uses a single connection from each VIC to each FI.
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c-series_integration/ucsm4-0/b_C-Series- Integration_UCSM4-0/b_C-Series-Integration_UCSM4-0_chapter_01.html
NEW QUESTION 37
A customer is configuring the UCS to handle a multitenant environment. The customer has created an organization within UCS for each tenant and would like to allow access to these organizations for only users that belong to that tenant.
In this scenario, which feature in UCS Manager should the customer use to accomplish this task?
- A. User Roles
- B. Locales
- C. Service Profile
- D. Trusted Platform Module
Answer: C
NEW QUESTION 38
You are asked to design a FlexPod solution that meets the minimum requirements and includes Application Centric Infrastructure (ACI).
Which three Cisco components are required in this scenario? (Choose three.)
- A. Cisco Nexus 2000 Series Fabric Extender
- B. Cisco Nexus 3000 Series switches
- C. Cisco UCS Series Fabric Interconnects
- D. Cisco UCS B-Series servers
- E. Cisco Nexus 9000 Series switches
Answer: C,D,E
NEW QUESTION 39
Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster.
Which configuration is valid for expansion?
- A. Add two Nexus 3232C switches for the cluster interconnect.
- B. Add one Nexus 3232C switch for the cluster interconnect.
- C. Add two Nexus 93108 switches for the cluster interconnect.
- D. Use the existing Nexus 93108 switches for the cluster interconnect.
Answer: A
NEW QUESTION 40
Which command would a FlexPod administrator use to determine whether an FC initiator has logged on to the fabric?
- A. MDS9148>show flogi database
- B. MDS9148>show fcc
- C. MDS9148>show fcfwd
- D. MDS9148>show fcdomain
Answer: A
NEW QUESTION 41
A customer with a FlexPod Express configuration is currently operating Linux servers. The company wants to move to a Windows-centralized access method for the NetApp storage component.
In this scenario, which two ONTAP features must be configured? (Choose two.)
- A. Active Directory security model
- B. SVM with the NFS protocol enabled
- C. Workgroup security model
- D. SVM with the SMB protocol enabled
Answer: A,D
NEW QUESTION 42
Your customer wants assurances that all aspects of FlexPod are highly available.
Which statement is correct in this scenario?
- A. Cisco UCS Manager maintains a replica of configuration information.
- B. Cisco UCS Manager automatically copies its configuration data to a remote data store.
- C. Cisco UCS Manager contains multiple UCS domains.
- D. Cisco UCS Manager uses active-active architecture.
Answer: A
Explanation:
The management and data plane of Cisco UCS is designed for high availability and redundant access layer fabric interconnects. In addition, Cisco UCS supports existing high availability and disaster recovery solutions for the data center, such as data replication and application-level clustering technologies.
NEW QUESTION 43
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. one
- B. four
- C. two
- D. three
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 44
You are designing a FlexPod solution that requires 32 ports running at 40 Gbps.
To satisfy this requirement, which Cisco Fabric Interconnect should you deploy?
- A. 6296UP
- B. 6332-16UP
- C. 0
- D. 6248UP
Answer: C
Explanation:
FI 6332 is a one-rack-unit (1RU) 40 Gigabit Ethernet, and FCoE switch offering up to 2.56 Tbps throughput and up to 32 ports. The switch has 32 40Gbps fixed Ethernet.
NEW QUESTION 45
A customer wants to deploy FlexPod for a VDI solution with 10,000 users, each with 10 GB of storage allocated.
To support this configuration, which three components must be sized? (Choose three.)
- A. the fabric interconnect ports
- B. the Cisco UCS servers
- C. the optical cable length
- D. the NetApp AFF storage
- E. the 1GbE ports from user systems
Answer: A,B,E
NEW QUESTION 46
......
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Updated Verified NS0-173 Q&As - Pass Guarantee: https://www.examcollectionpass.com/NetworkAppliance/NS0-173-practice-exam-dumps.html