Responsible company

In order to meet the demands of all customers, our company has a complete set of design, production and service quality guarantee system, the Delta-Aruba Certified Switching Professional Exam test guide is perfect. We can promise that quality first, service upmost. If you buy the HPE6-A46 learning materials from our company, we are glad to provide you with the high quality HPE6-A46 study question and the best service. The philosophy of our company is "quality is life, customer is god". We can promise that our company will provide all customers with the perfect quality guarantee system and sound management system. It is not necessary for you to have any worry about the quality and service of the HPE6-A46 learning materials from our company. We can make sure that our company will be responsible for all customers. If you decide to buy the HPE6-A46 study question from our company, you will receive a lot beyond your imagination. So hurry to buy our products, it will not let you down.

A convenient tool for studying

The HPE6-A46 learning materials from our company are very convenient for all people, including the convenient buying process, the download way and the study process and so on. Upon completion of your payment, you will receive the email from us in several minutes, and then you will have the right to use the Delta-Aruba Certified Switching Professional Exam test guide from our company. In addition, there are three different versions for all people to choose. According to your actual situation, you can choose the suitable version from our HPE6-A46 study question. We believe that the suitable version will help you improve your learning efficiency. It will be very easy for you to pass the exam and get the certification. More importantly, your will spend less time on preparing for HPE6-A46 exam than other people.

We have to admit that the processional certificates are very important for many people to show their capacity in the highly competitive environment. If you have the HP certification, it will be very easy for you to get a promotion. If you hope to get a job with opportunity of promotion, it will be the best choice chance for you to choose the HPE6-A46 study question from our company. Because our study materials have the enough ability to help you improve yourself and make you more excellent than other people. The HPE6-A46 learning materials from our company have helped a lot of people get the certification and achieve their dreams. Now you also have the opportunity to contact with the Delta-Aruba Certified Switching Professional Exam test guide from our company.

DOWNLOAD DEMO

The newest information about the exam

As is known to us, getting the newest information is very important for all people to pass the exam and get the certification in the shortest time. In order to help all customers gain the newest information about the HPE6-A46 exam, the experts and professors from our company designed the best Delta-Aruba Certified Switching Professional Exam test guide. The experts will update the system every day. If there is new information about the exam, you will receive an email about the newest information about the HPE6-A46 learning materials. We can promise that you will never miss the important information about the exam.

HP Delta-Aruba Certified Switching Professional Sample Questions:

1. Refer to the exhibits.


The network administrator enters the commands shown in Exhibit 2, and Switch-1 and Switch-2 exchange keepalive messages. What is the expected behavior if Switch-1 later fails to receive keepalive messages from Switch-2?

A) After two consecutive missed keep-alive packets, Switch-1 disables interface 1, and the interface stays disabled until the issue is fixed.
B) Switch-1 disables interface 1 for 10 seconds and then re-enables it. The interface continues to be re-enabled and disabled every 10 seconds until the issue is fixed.
C) Switch-1 disables interface 1 for 10 seconds, and then re-enables it. The same process repeats twice. If the issue persists, the switch disables the interface permanently.
D) After two consecutive missed keep-alive packets, Switch-1 sends SNMP traps, and Link 1 stays up until the issue is fixed.

2. Refer to the exhibits.
Exhibit 1

Exhibit 2

Switch-1 and Switch-2 are configured to provide VRRP in VLAN 2. The default gateway for VLAN 2 is set to the VRRP virtual IP. Client-1 in VLAN 2 cannot ping its default gateway.
Based on the exhibits, what can administrators determine?

A) Preempt mode is enabled on both Switch-1 and Switch-2, so the Master role continues to alternate between them, and the pings go astray.
B) The VRRP preempt delay time has not yet expired, and administrators should try to ping the gateway again in several minutes.
C) Switch-1 and Switch-2 have the same virtual router ID. The conflict interferes with connectivity.
D) This is the expected behavior, and Switch-1 should still be able to route traffic for Client-1.

3. Refer to the exhibit.

Endpoints in VLAN 2 connect directly to this switch. These devices should only be able to send DHCP, DNS, HTTP, and HTTPS traffic. However, they are able to send any traffic. Based on the exhibit, what is the issue?

A) The name of the ACL applied to VLAN 2 is incorrect.
B) The ACL is applied in the wrong direction.
C) The ACL lacks a deny ip any any statement at the end.
D) The switch does not have an IP address on VLAN 2.

4. A network administrator needs to create a backplane stack with four AOS-Switches. The administrator wants to choose which switch becomes the commander. Which procedure meets those needs?

A) Configure backplane switching settings on each switch while disconnected. Make sure the desired commander has member ID 1. Then, connect the switches.
B) Configure backplane switches settings on each switch while disconnected. Make sure the desired commander has priority value 1. Then, connect the switches.
C) Boot all of the switches at the same time and then connect the backplane stacking links. Then, access the desired commander, and make sure it has member ID 1.
D) Boot up the desired commander first and make sure stacking is enabled on it. Then, connect the stacking links and boot the other switches.

5. An AOS-Switch has type of service disabled on it globally. The administrator enters:
AOS-Switch(config)# interface 1 qos trust device aruba-ap
What is the effect of this command?

A) if interface 1 connects to an Aruba AP, it uses the incoming DSCP and a global DSCP map to prioritize traffic received on this interface
B) if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings sent by the controller to classify traffic received on interface 1
C) if interface 1 connects to an Aruba AP, the switch marks all traffic received on the interface with a higher than default priority value
D) if the AOS-Switch is integrated with an Aruba Mobility Controller, it uses QoS settings sent by the controller to prioritize traffic sent on interface 1

Solutions: